From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: dts: logicpd-som-lv: Resync with Kernel 5.1.9
Date: Tue, 11 Jun 2019 20:40:42 -0500 [thread overview]
Message-ID: <20190612014042.12042-1-aford173@gmail.com> (raw)
The MMC card-detect pin was incorrectly defined which was fixed.
This patch resync's the dts and removes the u-boot specific fix.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
index b3da8b1a73..956199a2b4 100644
--- a/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
+++ b/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
@@ -20,10 +20,6 @@
clock-frequency = <400000>;
};
-&mmc1 {
- cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
-};
-
&mmc2 {
status = "disabled";
};
diff --git a/arch/arm/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/dts/logicpd-som-lv-baseboard.dtsi
index 3524766515..4990ed90dc 100644
--- a/arch/arm/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/dts/logicpd-som-lv-baseboard.dtsi
@@ -152,8 +152,8 @@
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
- cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
+ wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+ cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cap-power-off-card;
--
2.17.1
next reply other threads:[~2019-06-12 1:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-12 1:40 Adam Ford [this message]
2019-07-14 13:08 ` [U-Boot] [PATCH] ARM: dts: logicpd-som-lv: Resync with Kernel 5.1.9 Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190612014042.12042-1-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.