From: Leonardo Bras <leonardo@linux.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: Leonardo Bras <leonardo@linux.ibm.com>,
Paul Mackerras <paulus@samba.org>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH] Replaces long number representation by BIT() macro
Date: Thu, 13 Jun 2019 15:02:27 -0300 [thread overview]
Message-ID: <20190613180227.29558-1-leonardo@linux.ibm.com> (raw)
The main reason of this change is to make these bitmasks more readable.
The macro ASM_CONST() just appends an UL to it's parameter, so it can be
easily replaced by BIT_MASK, that already uses a UL representation.
ASM_CONST() in this file may behave different if __ASSEMBLY__ is defined,
as it is used on .S files, just leaving the parameter as is.
However, I have noticed no difference in the generated binary after this
change.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
---
arch/powerpc/include/asm/firmware.h | 75 ++++++++++++++---------------
1 file changed, 37 insertions(+), 38 deletions(-)
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 00bc42d95679..7a5b0cc0bc85 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -14,46 +14,45 @@
#ifdef __KERNEL__
-#include <asm/asm-const.h>
-
+#include <linux/bits.h>
/* firmware feature bitmask values */
-#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001)
-#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002)
-#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004)
-#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008)
-#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010)
-#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020)
-#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040)
-#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080)
-#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100)
-#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200)
-#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400)
-#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800)
-#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000)
-#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000)
-#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
-#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
-#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000000020000)
-#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
-#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
-#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
-#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000)
-#define FW_FEATURE_HPT_RESIZE ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_VPHN ASM_CONST(0x0000000004000000)
-#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000)
-#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_SET_MODE ASM_CONST(0x0000000040000000)
-#define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000)
-#define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
-#define FW_FEATURE_PRRN ASM_CONST(0x0000000200000000)
-#define FW_FEATURE_DRMEM_V2 ASM_CONST(0x0000000400000000)
-#define FW_FEATURE_DRC_INFO ASM_CONST(0x0000000800000000)
-#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
-#define FW_FEATURE_PAPR_SCM ASM_CONST(0x0000002000000000)
+#define FW_FEATURE_PFT BIT(0)
+#define FW_FEATURE_TCE BIT(1)
+#define FW_FEATURE_SPRG0 BIT(2)
+#define FW_FEATURE_DABR BIT(3)
+#define FW_FEATURE_COPY BIT(4)
+#define FW_FEATURE_ASR BIT(5)
+#define FW_FEATURE_DEBUG BIT(6)
+#define FW_FEATURE_TERM BIT(7)
+#define FW_FEATURE_PERF BIT(8)
+#define FW_FEATURE_DUMP BIT(9)
+#define FW_FEATURE_INTERRUPT BIT(10)
+#define FW_FEATURE_MIGRATE BIT(11)
+#define FW_FEATURE_PERFMON BIT(12)
+#define FW_FEATURE_CRQ BIT(13)
+#define FW_FEATURE_VIO BIT(14)
+#define FW_FEATURE_RDMA BIT(15)
+#define FW_FEATURE_LLAN BIT(16)
+#define FW_FEATURE_BULK_REMOVE BIT(17)
+#define FW_FEATURE_XDABR BIT(18)
+#define FW_FEATURE_MULTITCE BIT(19)
+#define FW_FEATURE_SPLPAR BIT(20)
+#define FW_FEATURE_LPAR BIT(22)
+#define FW_FEATURE_PS3_LV1 BIT(23)
+#define FW_FEATURE_HPT_RESIZE BIT(24)
+#define FW_FEATURE_CMO BIT(25)
+#define FW_FEATURE_VPHN BIT(26)
+#define FW_FEATURE_XCMO BIT(27)
+#define FW_FEATURE_OPAL BIT(28)
+#define FW_FEATURE_SET_MODE BIT(30)
+#define FW_FEATURE_BEST_ENERGY BIT(31)
+#define FW_FEATURE_TYPE1_AFFINITY BIT(32)
+#define FW_FEATURE_PRRN BIT(33)
+#define FW_FEATURE_DRMEM_V2 BIT(34)
+#define FW_FEATURE_DRC_INFO BIT(35)
+#define FW_FEATURE_BLOCK_REMOVE BIT(36)
+#define FW_FEATURE_PAPR_SCM BIT(37)
#ifndef __ASSEMBLY__
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Leonardo Bras <leonardo@linux.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: Leonardo Bras <leonardo@linux.ibm.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH] Replaces long number representation by BIT() macro
Date: Thu, 13 Jun 2019 15:02:27 -0300 [thread overview]
Message-ID: <20190613180227.29558-1-leonardo@linux.ibm.com> (raw)
The main reason of this change is to make these bitmasks more readable.
The macro ASM_CONST() just appends an UL to it's parameter, so it can be
easily replaced by BIT_MASK, that already uses a UL representation.
ASM_CONST() in this file may behave different if __ASSEMBLY__ is defined,
as it is used on .S files, just leaving the parameter as is.
However, I have noticed no difference in the generated binary after this
change.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
---
arch/powerpc/include/asm/firmware.h | 75 ++++++++++++++---------------
1 file changed, 37 insertions(+), 38 deletions(-)
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 00bc42d95679..7a5b0cc0bc85 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -14,46 +14,45 @@
#ifdef __KERNEL__
-#include <asm/asm-const.h>
-
+#include <linux/bits.h>
/* firmware feature bitmask values */
-#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001)
-#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002)
-#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004)
-#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008)
-#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010)
-#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020)
-#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040)
-#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080)
-#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100)
-#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200)
-#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400)
-#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800)
-#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000)
-#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000)
-#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
-#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
-#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000000020000)
-#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
-#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
-#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
-#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000)
-#define FW_FEATURE_HPT_RESIZE ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_VPHN ASM_CONST(0x0000000004000000)
-#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000)
-#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_SET_MODE ASM_CONST(0x0000000040000000)
-#define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000)
-#define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
-#define FW_FEATURE_PRRN ASM_CONST(0x0000000200000000)
-#define FW_FEATURE_DRMEM_V2 ASM_CONST(0x0000000400000000)
-#define FW_FEATURE_DRC_INFO ASM_CONST(0x0000000800000000)
-#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
-#define FW_FEATURE_PAPR_SCM ASM_CONST(0x0000002000000000)
+#define FW_FEATURE_PFT BIT(0)
+#define FW_FEATURE_TCE BIT(1)
+#define FW_FEATURE_SPRG0 BIT(2)
+#define FW_FEATURE_DABR BIT(3)
+#define FW_FEATURE_COPY BIT(4)
+#define FW_FEATURE_ASR BIT(5)
+#define FW_FEATURE_DEBUG BIT(6)
+#define FW_FEATURE_TERM BIT(7)
+#define FW_FEATURE_PERF BIT(8)
+#define FW_FEATURE_DUMP BIT(9)
+#define FW_FEATURE_INTERRUPT BIT(10)
+#define FW_FEATURE_MIGRATE BIT(11)
+#define FW_FEATURE_PERFMON BIT(12)
+#define FW_FEATURE_CRQ BIT(13)
+#define FW_FEATURE_VIO BIT(14)
+#define FW_FEATURE_RDMA BIT(15)
+#define FW_FEATURE_LLAN BIT(16)
+#define FW_FEATURE_BULK_REMOVE BIT(17)
+#define FW_FEATURE_XDABR BIT(18)
+#define FW_FEATURE_MULTITCE BIT(19)
+#define FW_FEATURE_SPLPAR BIT(20)
+#define FW_FEATURE_LPAR BIT(22)
+#define FW_FEATURE_PS3_LV1 BIT(23)
+#define FW_FEATURE_HPT_RESIZE BIT(24)
+#define FW_FEATURE_CMO BIT(25)
+#define FW_FEATURE_VPHN BIT(26)
+#define FW_FEATURE_XCMO BIT(27)
+#define FW_FEATURE_OPAL BIT(28)
+#define FW_FEATURE_SET_MODE BIT(30)
+#define FW_FEATURE_BEST_ENERGY BIT(31)
+#define FW_FEATURE_TYPE1_AFFINITY BIT(32)
+#define FW_FEATURE_PRRN BIT(33)
+#define FW_FEATURE_DRMEM_V2 BIT(34)
+#define FW_FEATURE_DRC_INFO BIT(35)
+#define FW_FEATURE_BLOCK_REMOVE BIT(36)
+#define FW_FEATURE_PAPR_SCM BIT(37)
#ifndef __ASSEMBLY__
--
2.17.1
next reply other threads:[~2019-06-13 18:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-13 18:02 Leonardo Bras [this message]
2019-06-13 18:02 ` [RFC PATCH] Replaces long number representation by BIT() macro Leonardo Bras
2019-06-13 20:24 ` Leonardo Bras
2019-06-13 20:24 ` Leonardo Bras
2019-07-02 15:19 ` Michael Ellerman
2019-07-02 15:19 ` Michael Ellerman
2019-07-02 16:16 ` Segher Boessenkool
2019-07-02 16:48 ` Segher Boessenkool
2019-07-07 13:15 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190613180227.29558-1-leonardo@linux.ibm.com \
--to=leonardo@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.