From: Ruifeng Wang <ruifeng.wang@arm.com>
To: bruce.richardson@intel.com, vladimir.medvedkin@intel.com
Cc: dev@dpdk.org, honnappa.nagarahalli@arm.com, gavin.hu@arm.com,
nd@arm.com, Ruifeng Wang <ruifeng.wang@arm.com>
Subject: [dpdk-dev] [PATCH v2 2/3] lib/lpm: memory orderings to avoid race conditions for v20
Date: Wed, 19 Jun 2019 13:36:14 +0800 [thread overview]
Message-ID: <20190619053615.24613-2-ruifeng.wang@arm.com> (raw)
In-Reply-To: <20190619053615.24613-1-ruifeng.wang@arm.com>
When a tbl8 group is getting attached to a tbl24 entry, lookup
might fail even though the entry is configured in the table.
For ex: consider a LPM table configured with 10.10.10.1/24.
When a new entry 10.10.10.32/28 is being added, a new tbl8
group is allocated and tbl24 entry is changed to point to
the tbl8 group. If the tbl24 entry is written without the tbl8
group entries updated, a lookup on 10.10.10.9 will return
failure.
Correct memory orderings are required to ensure that the
store to tbl24 does not happen before the stores to tbl8 group
entries complete.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
---
v2: fixed clang building issue by supplying alignment attribute.
v1: initail version
lib/librte_lpm/rte_lpm.c | 31 ++++++++++++++++++++++++-------
lib/librte_lpm/rte_lpm.h | 4 ++--
2 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/lib/librte_lpm/rte_lpm.c b/lib/librte_lpm/rte_lpm.c
index 6ec450a08..0addff5d4 100644
--- a/lib/librte_lpm/rte_lpm.c
+++ b/lib/librte_lpm/rte_lpm.c
@@ -737,7 +737,8 @@ add_depth_small_v20(struct rte_lpm_v20 *lpm, uint32_t ip, uint8_t depth,
/* Setting tbl24 entry in one go to avoid race
* conditions
*/
- lpm->tbl24[i] = new_tbl24_entry;
+ __atomic_store(&lpm->tbl24[i], &new_tbl24_entry,
+ __ATOMIC_RELEASE);
continue;
}
@@ -892,7 +893,8 @@ add_depth_big_v20(struct rte_lpm_v20 *lpm, uint32_t ip_masked, uint8_t depth,
.depth = 0,
};
- lpm->tbl24[tbl24_index] = new_tbl24_entry;
+ __atomic_store(&lpm->tbl24[tbl24_index], &new_tbl24_entry,
+ __ATOMIC_RELEASE);
} /* If valid entry but not extended calculate the index into Table8. */
else if (lpm->tbl24[tbl24_index].valid_group == 0) {
@@ -938,7 +940,8 @@ add_depth_big_v20(struct rte_lpm_v20 *lpm, uint32_t ip_masked, uint8_t depth,
.depth = 0,
};
- lpm->tbl24[tbl24_index] = new_tbl24_entry;
+ __atomic_store(&lpm->tbl24[tbl24_index], &new_tbl24_entry,
+ __ATOMIC_RELEASE);
} else { /*
* If it is valid, extended entry calculate the index into tbl8.
@@ -1320,7 +1323,14 @@ delete_depth_small_v20(struct rte_lpm_v20 *lpm, uint32_t ip_masked,
if (lpm->tbl24[i].valid_group == 0 &&
lpm->tbl24[i].depth <= depth) {
- lpm->tbl24[i].valid = INVALID;
+ struct rte_lpm_tbl_entry_v20 zero_tbl_entry = {
+ .valid = INVALID,
+ .depth = 0,
+ .valid_group = 0,
+ };
+ zero_tbl_entry.next_hop = 0;
+ __atomic_store(&lpm->tbl24[i], &zero_tbl_entry,
+ __ATOMIC_RELEASE);
} else if (lpm->tbl24[i].valid_group == 1) {
/*
* If TBL24 entry is extended, then there has
@@ -1365,7 +1375,8 @@ delete_depth_small_v20(struct rte_lpm_v20 *lpm, uint32_t ip_masked,
if (lpm->tbl24[i].valid_group == 0 &&
lpm->tbl24[i].depth <= depth) {
- lpm->tbl24[i] = new_tbl24_entry;
+ __atomic_store(&lpm->tbl24[i], &new_tbl24_entry,
+ __ATOMIC_RELEASE);
} else if (lpm->tbl24[i].valid_group == 1) {
/*
* If TBL24 entry is extended, then there has
@@ -1647,8 +1658,11 @@ delete_depth_big_v20(struct rte_lpm_v20 *lpm, uint32_t ip_masked,
tbl8_recycle_index = tbl8_recycle_check_v20(lpm->tbl8, tbl8_group_start);
if (tbl8_recycle_index == -EINVAL) {
- /* Set tbl24 before freeing tbl8 to avoid race condition. */
+ /* Set tbl24 before freeing tbl8 to avoid race condition.
+ * Prevent the free of the tbl8 group from hoisting.
+ */
lpm->tbl24[tbl24_index].valid = 0;
+ __atomic_thread_fence(__ATOMIC_RELEASE);
tbl8_free_v20(lpm->tbl8, tbl8_group_start);
} else if (tbl8_recycle_index > -1) {
/* Update tbl24 entry. */
@@ -1659,8 +1673,11 @@ delete_depth_big_v20(struct rte_lpm_v20 *lpm, uint32_t ip_masked,
.depth = lpm->tbl8[tbl8_recycle_index].depth,
};
- /* Set tbl24 before freeing tbl8 to avoid race condition. */
+ /* Set tbl24 before freeing tbl8 to avoid race condition.
+ * Prevent the free of the tbl8 group from hoisting.
+ */
lpm->tbl24[tbl24_index] = new_tbl24_entry;
+ __atomic_thread_fence(__ATOMIC_RELEASE);
tbl8_free_v20(lpm->tbl8, tbl8_group_start);
}
diff --git a/lib/librte_lpm/rte_lpm.h b/lib/librte_lpm/rte_lpm.h
index 6f5704c5c..98c70ecbe 100644
--- a/lib/librte_lpm/rte_lpm.h
+++ b/lib/librte_lpm/rte_lpm.h
@@ -88,7 +88,7 @@ struct rte_lpm_tbl_entry_v20 {
*/
uint8_t valid_group :1;
uint8_t depth :6; /**< Rule depth. */
-};
+} __rte_aligned(2);
__extension__
struct rte_lpm_tbl_entry {
@@ -121,7 +121,7 @@ struct rte_lpm_tbl_entry_v20 {
uint8_t group_idx;
uint8_t next_hop;
};
-};
+} __rte_aligned(2);
__extension__
struct rte_lpm_tbl_entry {
--
2.17.1
next prev parent reply other threads:[~2019-06-19 5:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-19 5:36 [dpdk-dev] [PATCH v2 1/3] lib/lpm: memory orderings to avoid race conditions for v1604 Ruifeng Wang
2019-06-19 5:36 ` Ruifeng Wang [this message]
2019-06-19 5:36 ` [dpdk-dev] [PATCH v2 3/3] lib/lpm: remove unnecessary inline Ruifeng Wang
2019-06-19 12:51 ` Medvedkin, Vladimir
2019-06-20 10:34 ` Ruifeng Wang (Arm Technology China)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190619053615.24613-2-ruifeng.wang@arm.com \
--to=ruifeng.wang@arm.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gavin.hu@arm.com \
--cc=honnappa.nagarahalli@arm.com \
--cc=nd@arm.com \
--cc=vladimir.medvedkin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.