Re: [PATCH net-next v2] ipv6: Error when route does not have any valid nexthops

[Jiri Pirko <jiri@resnulli.us>]

Thu, Jun 20, 2019 at 11:10:21AM CEST, idosch@idosch.org wrote:
>From: Ido Schimmel <idosch@mellanox.com>
>
>When user space sends invalid information in RTA_MULTIPATH, the nexthop
>list in ip6_route_multipath_add() is empty and 'rt_notif' is set to
>NULL.
>
>The code that emits the in-kernel notifications does not check for this
>condition, which results in a NULL pointer dereference [1].
>
>Fix this by bailing earlier in the function if the parsed nexthop list
>is empty. This is consistent with the corresponding IPv4 code.
>
>v2:
>* Check if parsed nexthop list is empty and bail with extack set
>
>[1]
>kasan: CONFIG_KASAN_INLINE enabled
>kasan: GPF could be caused by NULL-ptr deref or user memory access
>general protection fault: 0000 [#1] PREEMPT SMP KASAN
>CPU: 0 PID: 9190 Comm: syz-executor149 Not tainted 5.2.0-rc5+ #38
>Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
>Google 01/01/2011
>RIP: 0010:call_fib6_multipath_entry_notifiers+0xd1/0x1a0
>net/ipv6/ip6_fib.c:396
>Code: 8b b5 30 ff ff ff 48 c7 85 68 ff ff ff 00 00 00 00 48 c7 85 70 ff ff
>ff 00 00 00 00 89 45 88 4c 89 e0 48 c1 e8 03 4c 89 65 80 <42> 80 3c 28 00
>0f 85 9a 00 00 00 48 b8 00 00 00 00 00 fc ff df 4d
>RSP: 0018:ffff88809788f2c0 EFLAGS: 00010246
>RAX: 0000000000000000 RBX: 1ffff11012f11e59 RCX: 00000000ffffffff
>RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
>RBP: ffff88809788f390 R08: ffff88809788f8c0 R09: 000000000000000c
>R10: ffff88809788f5d8 R11: ffff88809788f527 R12: 0000000000000000
>R13: dffffc0000000000 R14: ffff88809788f8c0 R15: ffffffff89541d80
>FS:  000055555632c880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>CR2: 0000000020000080 CR3: 000000009ba7c000 CR4: 00000000001406f0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>Call Trace:
>  ip6_route_multipath_add+0xc55/0x1490 net/ipv6/route.c:5094
>  inet6_rtm_newroute+0xed/0x180 net/ipv6/route.c:5208
>  rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5219
>  netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
>  rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237
>  netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
>  netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
>  netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917
>  sock_sendmsg_nosec net/socket.c:646 [inline]
>  sock_sendmsg+0xd7/0x130 net/socket.c:665
>  ___sys_sendmsg+0x803/0x920 net/socket.c:2286
>  __sys_sendmsg+0x105/0x1d0 net/socket.c:2324
>  __do_sys_sendmsg net/socket.c:2333 [inline]
>  __se_sys_sendmsg net/socket.c:2331 [inline]
>  __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2331
>  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
>  entry_SYSCALL_64_after_hwframe+0x49/0xbe
>RIP: 0033:0x4401f9
>Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
>48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
>ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
>RSP: 002b:00007ffc09fd0028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
>RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401f9
>RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
>RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
>R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a80
>R13: 0000000000401b10 R14: 0000000000000000 R15: 0000000000000000
>
>Reported-by: syzbot+382566d339d52cd1a204@syzkaller.appspotmail.com
>Fixes: ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace")
>Signed-off-by: Ido Schimmel <idosch@mellanox.com>
>---
> net/ipv6/route.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
>diff --git a/net/ipv6/route.c b/net/ipv6/route.c
>index c4d285fe0adc..891c8cd27712 100644
>--- a/net/ipv6/route.c
>+++ b/net/ipv6/route.c
>@@ -5043,6 +5043,12 @@ static int ip6_route_multipath_add(struct fib6_config *cfg,
> 		rtnh = rtnh_next(rtnh, &remaining);
> 	}
> 
>+	if (list_empty(&rt6_nh_list)) {
>+		NL_SET_ERR_MSG(extack,
>+			       "Invalid nexthop configuration - no valid nexthops");

No need for a line wrap.

Anyway, the fix looks fine.
Reviewed-by: Jiri Pirko <jiri@mellanox.com>


>+		return -EINVAL;
>+	}
>+
> 	/* for add and replace send one notification with all nexthops.
> 	 * Skip the notification in fib6_add_rt2node and send one with
> 	 * the full route when done
>-- 
>2.20.1
>