All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 18/27] toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_63261
Date: Sat, 22 Jun 2019 19:53:22 +0200	[thread overview]
Message-ID: <20190622195322.47a8c59f@windsurf> (raw)
In-Reply-To: <20190614210346.121013-19-giulio.benetti@micronovasrl.com>

On Fri, 14 Jun 2019 23:03:37 +0200
Giulio Benetti <giulio.benetti@micronovasrl.com> wrote:

> GCC hangs while building fxload for the Microblaze Arch using following

So gcc does not "hang", but there is a build failure, which is a bit
different.

I applied this patch as well as 19/27 (fxload) and 20/27 (dmalloc).

However, could you double check if the issue occurs with just
optimization enabled, or only when optimization *and*
BR2_ENABLE_DEBUG=y are enabled?

Indeed, my original gcc bug report said that the problem only occurred
when both are combined.

I applied anyway, because that debugging thing would simply be a
further refinement, so it's not that important.

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

  reply	other threads:[~2019-06-22 17:53 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-14 21:03 [Buildroot] [PATCH 00/27] Microblaze clean up Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 01/27] package/keyutils: re-enable package on microblaze Giulio Benetti
2019-06-19  5:24   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 02/27] package/ecryptfs-utils: " Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 03/27] package/libnss: use correct CFLAGS and LDFLAGS Giulio Benetti
2019-06-19 12:33   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 04/27] package/libnss: re-enable package on microblaze Giulio Benetti
2019-06-19 12:34   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 05/27] package/ecryptfs-utils: remove libnss gcc bug dependency Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 06/27] package/stress-ng: re-enable package on microblaze Giulio Benetti
2019-06-19 12:36   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 07/27] package/bullet: re-enable package when gcc bug 85180 is present Giulio Benetti
2019-06-19 12:46   ` Thomas Petazzoni
2019-06-19 13:17     ` Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 08/27] package/boost: allow building on microblaze Giulio Benetti
2019-06-19 15:56   ` Thomas Petazzoni
2019-06-20  9:37     ` Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 09/27] package/boost: work around gcc bug 85180 for boost-fiber option Giulio Benetti
2019-06-19 15:58   ` Thomas Petazzoni
2019-06-20  9:39     ` Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 10/27] package/snort: work around gcc bug 85180 Giulio Benetti
2019-06-19 16:00   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 11/27] package/prboom: avoid using hardcoded optimization flags Giulio Benetti
2019-06-19 19:37   ` Thomas Petazzoni
2019-06-20 13:40     ` Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 12/27] package/prboom: work around gcc bug 85180 Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 13/27] package/kmsxx: " Giulio Benetti
2019-06-19 19:42   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 14/27] package/gpsd: use common BR2_TOOLCHAIN_HAS_GCC_BUG_68485 Giulio Benetti
2019-06-19 19:49   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 15/27] package/flann: re-enable package on microblaze Giulio Benetti
2019-06-19 19:53   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 16/27] package/libspatialindex: use common BR2_TOOLCHAIN_HAS_BUG_68485 Giulio Benetti
2019-06-19 19:54   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 17/27] package/lua-cqueues: fix build failure due to Gcc Bug 68485 Giulio Benetti
2019-06-19 19:58   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 18/27] toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_63261 Giulio Benetti
2019-06-22 17:53   ` Thomas Petazzoni [this message]
2019-06-24  9:30     ` Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 19/27] package/fxload: re-enable package on microblaze Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 20/27] package/dmalloc: " Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 21/27] toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_90620 Giulio Benetti
2019-06-20 16:14   ` Thomas Petazzoni
2019-06-21  9:22     ` Giulio Benetti
2019-06-21 16:51       ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 22/27] package/haproxy: re-enable package on microblaze Giulio Benetti
2019-06-20 16:13   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 23/27] package/tvheadend: fix PIE build failures Giulio Benetti
2019-06-14 21:28   ` Giulio Benetti
2019-06-20 14:36   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 24/27] package/tvheadend: re-enable package on microblaze Giulio Benetti
2019-06-20 14:36   ` Thomas Petazzoni
2019-06-14 21:03 ` [Buildroot] [PATCH 25/27] package/qt5/qt5webengine: re-enable building if BUG_85682=y on Qt5 Latest Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 26/27] package/sqlite: work around build timeout Giulio Benetti
2019-06-20 14:42   ` Thomas Petazzoni
2019-06-20 14:46     ` Giulio Benetti
2019-06-14 21:03 ` [Buildroot] [PATCH 27/27] package/flashbench: remove old toolchain microblaze & sh2a workaround Giulio Benetti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190622195322.47a8c59f@windsurf \
    --to=thomas.petazzoni@bootlin.com \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.