All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-hwmon@vger.kernel.org, Eduardo Valentin <eduval@amazon.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.14 36/51] hwmon: (core) add thermal sensors only if dev->of_node is present
Date: Mon, 24 Jun 2019 17:56:54 +0800	[thread overview]
Message-ID: <20190624092310.342420987@linuxfoundation.org> (raw)
In-Reply-To: <20190624092305.919204959@linuxfoundation.org>

[ Upstream commit c41dd48e21fae3e55b3670ccf2eb562fc1f6a67d ]

Drivers may register to hwmon and request for also registering
with the thermal subsystem (HWMON_C_REGISTER_TZ). However,
some of these driver, e.g. marvell phy, may be probed from
Device Tree or being dynamically allocated, and in the later
case, it will not have a dev->of_node entry.

Registering with hwmon without the dev->of_node may result in
different outcomes depending on the device tree, which may
be a bit misleading. If the device tree blob has no 'thermal-zones'
node, the *hwmon_device_register*() family functions are going
to gracefully succeed, because of-thermal,
*thermal_zone_of_sensor_register() return -ENODEV in this case,
and the hwmon error path handles this error code as success to
cover for the case where CONFIG_THERMAL_OF is not set.
However, if the device tree blob has the 'thermal-zones'
entry, the *hwmon_device_register*() will always fail on callers
with no dev->of_node, propagating -EINVAL.

If dev->of_node is not present, calling of-thermal does not
make sense. For this reason, this patch checks first if the
device has a of_node before going over the process of registering
with the thermal subsystem of-thermal interface. And in this case,
when a caller of *hwmon_device_register*() with HWMON_C_REGISTER_TZ
and no dev->of_node will still register with hwmon, but not with
the thermal subsystem. If all the hwmon part bits are in place,
the registration will succeed.

Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API")
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/hwmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index c9790e2c3440..7b53065e9882 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -608,7 +608,7 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
 	if (err)
 		goto free_hwmon;
 
-	if (dev && chip && chip->ops->read &&
+	if (dev && dev->of_node && chip && chip->ops->read &&
 	    chip->info[0]->type == hwmon_chip &&
 	    (chip->info[0]->config[0] & HWMON_C_REGISTER_TZ)) {
 		const struct hwmon_channel_info **info = chip->info;
-- 
2.20.1




  parent reply	other threads:[~2019-06-24 10:00 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-24  9:56 [PATCH 4.14 00/51] 4.14.130-stable review Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 01/51] tracing: Silence GCC 9 array bounds warning Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 02/51] objtool: Support per-function rodata sections Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 03/51] gcc-9: silence address-of-packed-member warning Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 04/51] net: phy: broadcom: Use strlcpy() for ethtool::get_strings Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 05/51] mmc: core: Prevent processing SDIO IRQs when the card is suspended Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 06/51] scsi: ufs: Avoid runtime suspend possibly being blocked forever Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 07/51] usb: chipidea: udc: workaround for endpoint conflict issue Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 08/51] IB/hfi1: Silence txreq allocation warnings Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 09/51] Input: synaptics - enable SMBus on ThinkPad E480 and E580 Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 10/51] Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 11/51] apparmor: enforce nullbyte at end of tag string Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 12/51] ARC: fix build warnings Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 13/51] ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 14/51] ARC: [plat-hsdk]: Add missing FIFO size entry in " Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 15/51] parport: Fix mem leak in parport_register_dev_model Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 16/51] parisc: Fix compiler warnings in float emulation code Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 17/51] IB/rdmavt: Fix alloc_qpn() WARN_ON() Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 18/51] IB/hfi1: Insure freeze_work work_struct is canceled on shutdown Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 19/51] IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 20/51] IB/hfi1: Validate page aligned for a given virtual address Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 21/51] MIPS: uprobes: remove set but not used variable epc Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 22/51] xtensa: Fix section mismatch between memblock_reserve and mem_reserve Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 23/51] net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0 Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 24/51] net: hns: Fix loopback test failed at copper ports Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 25/51] mdesc: fix a missing-check bug in get_vdev_port_node_info() Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 26/51] sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 27/51] net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 28/51] net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 29/51] drm/arm/hdlcd: Actually validate CRTC modes Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 30/51] drm/arm/hdlcd: Allow a bit of clock tolerance Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 31/51] scripts/checkstack.pl: Fix arm64 wrong or unknown architecture Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 32/51] scsi: ufs: Check that space was properly alloced in copy_query_response Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 33/51] scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous() Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 34/51] net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 35/51] s390/qeth: fix VLAN attribute in bridge_hostnotify udev event Greg Kroah-Hartman
2019-06-24  9:56 ` Greg Kroah-Hartman [this message]
2019-06-24  9:56 ` [PATCH 4.14 37/51] hwmon: (pmbus/core) Treat parameters as paged if on multiple pages Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 38/51] nvme: Fix u32 overflow in the number of namespace list calculation Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 39/51] btrfs: start readahead also in seed devices Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 40/51] can: flexcan: fix timeout when set small bitrate Greg Kroah-Hartman
2019-06-24  9:56 ` [PATCH 4.14 41/51] can: purge socket error queue on sock destruct Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 42/51] powerpc/bpf: use unsigned division instruction for 64-bit operations Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 43/51] ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 44/51] ARM: dts: am57xx-idk: Remove support for voltage switching for SD card Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 45/51] Bluetooth: Align minimum encryption key size for LE and BR/EDR connections Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 46/51] Bluetooth: Fix regression with minimum encryption key size alignment Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 47/51] SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 48/51] cfg80211: fix memory leak of wiphy device name Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 49/51] mac80211: drop robust management frames from unknown TA Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 50/51] mac80211: handle deauthentication/disassociation from TDLS peer Greg Kroah-Hartman
2019-06-24  9:57 ` [PATCH 4.14 51/51] mac80211: Do not use stack memory with scatterlist for GMAC Greg Kroah-Hartman
2019-06-24 15:31 ` [PATCH 4.14 00/51] 4.14.130-stable review kernelci.org bot
2019-06-24 15:47 ` Naresh Kamboju
2019-06-24 18:03 ` Guenter Roeck
2019-06-25  9:59 ` Jon Hunter
2019-06-25  9:59   ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190624092310.342420987@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=eduval@amazon.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.