From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>,
Linus Walleij <linus.walleij@linaro.org>,
Sasha Levin <sashal@kernel.org>,
linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 5.1 35/51] gpio: pca953x: hack to fix 24 bit gpio expanders
Date: Tue, 25 Jun 2019 23:40:51 -0400 [thread overview]
Message-ID: <20190626034117.23247-35-sashal@kernel.org> (raw)
In-Reply-To: <20190626034117.23247-1-sashal@kernel.org>
From: "H. Nikolaus Schaller" <hns@goldelico.com>
[ Upstream commit 3b00691cc46a4089368a008b30655a8343411715 ]
24 bit expanders use REG_ADDR_AI in combination with register addressing. This
conflicts with regmap which takes this bit as part of the register number,
i.e. a second cache entry is defined for accessed with REG_ADDR_AI being
set although on the chip it is the same register as with REG_ADDR_AI being
cleared.
The problem was introduced by
commit b32cecb46bdc ("gpio: pca953x: Extract the register address mangling to single function")
but only became visible by
commit 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations")
because before, the regmap size was effectively ignored and
pca953x_writeable_register() did know to ignore REG_ADDR_AI. Still, there
were two separate cache entries created.
Since the use of REG_ADDR_AI seems to be static we can work around this
issue by simply increasing the size of the regmap to cover the "virtual"
registers with REG_ADDR_AI being set. This only means that half of the
regmap buffer will be unused.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-pca953x.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 7e76830b3368..b6f10e56dfa0 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -306,7 +306,8 @@ static const struct regmap_config pca953x_i2c_regmap = {
.volatile_reg = pca953x_volatile_register,
.cache_type = REGCACHE_RBTREE,
- .max_register = 0x7f,
+ /* REVISIT: should be 0x7f but some 24 bit chips use REG_ADDR_AI */
+ .max_register = 0xff,
};
static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
--
2.20.1
next prev parent reply other threads:[~2019-06-26 3:50 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 3:40 [PATCH AUTOSEL 5.1 01/51] HID: i2c-hid: add iBall Aer3 to descriptor override Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 02/51] ASoC : cs4265 : readable register too low Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 03/51] ASoC: ak4458: add return value for ak4458_probe Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 04/51] ASoC: soc-pcm: BE dai needs prepare when pause release after resume Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 05/51] ASoC: ak4458: rstn_control - return a non-zero on error only Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 06/51] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 07/51] ASoC: soc-dpm: fixup DAI active unbalance Sasha Levin
2019-06-26 10:03 ` Mark Brown
2019-06-27 0:20 ` Sasha Levin
2019-07-01 16:18 ` Mark Brown
2019-07-03 14:16 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 08/51] ASoC: core: lock client_mutex while removing link components Sasha Levin
2019-06-26 10:37 ` Mark Brown
2019-06-27 0:24 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 09/51] iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock Sasha Levin
2019-06-26 3:40 ` Sasha Levin
2019-06-26 6:56 ` Joerg Roedel
2019-06-26 6:56 ` Joerg Roedel
2019-06-27 0:27 ` Sasha Levin
2019-06-27 0:27 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 10/51] iommu/vt-d: Set the right field for Page Walk Snoop Sasha Levin
2019-06-26 3:40 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 11/51] ASoC: sun4i-codec: fix first delay on Speaker Sasha Levin
2019-06-26 10:37 ` Mark Brown
2019-07-03 14:20 ` Sasha Levin
2019-07-03 17:07 ` Mark Brown
2019-07-03 18:10 ` Sasha Levin
2019-07-03 20:08 ` Mark Brown
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 12/51] HID: a4tech: fix horizontal scrolling Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 13/51] ASoC: Intel: Baytrail: add quirk for Aegex 10 (RU2) tablet Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 14/51] ASoC: hda: fix unbalanced codec dev refcount for HDA_DEV_ASOC Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 15/51] drm/mediatek: fix unbind functions Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 16/51] drm/mediatek: unbind components in mtk_drm_unbind() Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 17/51] drm/mediatek: call drm_atomic_helper_shutdown() when unbinding driver Sasha Levin
2019-06-26 3:40 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 18/51] drm/mediatek: clear num_pipes when unbind driver Sasha Levin
2019-06-26 3:40 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 19/51] drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable() Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 20/51] ASoC: max98090: remove 24-bit format support if RJ is 0 Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 21/51] ASoC: sun4i-i2s: Fix sun8i tx channel offset mask Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 22/51] ASoC: sun4i-i2s: Add offset to RX channel select Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 23/51] x86/CPU: Add more Icelake model numbers Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 24/51] usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i] Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 25/51] usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 26/51] usb: gadget: dwc2: fix zlp handling Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 27/51] ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 28/51] ASoC: Intel: bytcht_es8316: " Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 29/51] ASoC: Intel: cht_bsw_nau8824: " Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 30/51] ASoC: Intel: cht_bsw_rt5672: " Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 31/51] ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card Sasha Levin
2019-06-26 10:38 ` Mark Brown
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 32/51] ALSA: hdac: fix memory release for SST and SOF drivers Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 33/51] SoC: rt274: Fix internal jack assignment in set_jack callback Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 34/51] scsi: hpsa: correct ioaccel2 chaining Sasha Levin
2019-06-26 3:40 ` Sasha Levin [this message]
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 36/51] drm: panel-orientation-quirks: Add quirk for GPD pocket2 Sasha Levin
2019-06-26 3:40 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 37/51] drm: panel-orientation-quirks: Add quirk for GPD MicroPC Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 38/51] ASoC: core: Fix deadlock in snd_soc_instantiate_card() Sasha Levin
2019-06-26 10:39 ` Mark Brown
2019-06-27 0:24 ` Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 39/51] ASoC: Intel: sst: fix kmalloc call with wrong flags Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 40/51] platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 41/51] platform/x86: intel-vbtn: Report switch events when event wakes device Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 42/51] platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration Sasha Levin
2019-06-26 3:40 ` [PATCH AUTOSEL 5.1 43/51] platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 44/51] i2c: pca-platform: Fix GPIO lookup code Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 45/51] arm64: tlbflush: Ensure start/end of address range are aligned to stride Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 46/51] cpuset: restore sanity to cpuset_cpus_allowed_fallback() Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 47/51] scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 48/51] mm/mlock.c: change count_mm_mlocked_page_nr return type Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 49/51] tracing: avoid build warning with HAVE_NOP_MCOUNT Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 50/51] module: Fix livepatch/ftrace module text permissions race Sasha Levin
2019-06-26 3:41 ` [PATCH AUTOSEL 5.1 51/51] ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190626034117.23247-35-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=hns@goldelico.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.