All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org, ville.syrjala@intel.com
Subject: Re: [V2] drm/i915: Add icl mipi dsi properties
Date: Wed, 26 Jun 2019 16:59:08 +0300	[thread overview]
Message-ID: <20190626135908.GS5942@intel.com> (raw)
In-Reply-To: <877e98se2o.fsf@intel.com>

On Wed, Jun 26, 2019 at 03:53:19PM +0300, Jani Nikula wrote:
> On Wed, 26 Jun 2019, Vandita Kulkarni <vandita.kulkarni@intel.com> wrote:
> > Add scaling and panel orientation properties for
> > icl mipi dsi.
> >
> > v2: Add platform specific function (Ville)
> >
> > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/icl_dsi.c | 30 ++++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/display/vlv_dsi.c |  4 ++--
> >  2 files changed, 32 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> > index b8673debf932..002db3300f40 100644
> > --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> > +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> > @@ -1255,9 +1255,14 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
> >  					intel_connector->panel.fixed_mode;
> >  	struct drm_display_mode *adjusted_mode =
> >  					&pipe_config->base.adjusted_mode;
> > +	int ret = 0;
> 
> No ned to initialize.
> 
> >  
> >  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> >  	intel_fixed_panel_mode(fixed_mode, adjusted_mode);
> > +
> > +	ret = skl_update_scaler_crtc(pipe_config);
> > +	if (ret)
> > +		return ret;

This function call is not needed IIRC. The calls we already have
in dp/hdmi are redundant. I have a branch somewhere where I remove
them.

> >  	intel_pch_panel_fitting(crtc, pipe_config, conn_state->scaling_mode);
> >  
> >  	adjusted_mode->flags = 0;
> > @@ -1508,6 +1513,29 @@ static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
> >  	intel_dsi_log_params(intel_dsi);
> >  }
> >  
> > +static void icl_dsi_add_properties(struct intel_connector *connector)
> > +{
> > +	u32 allowed_scalers;
> > +
> > +	if (!connector->panel.fixed_mode)
> > +		return;
> 
> This is a redundant check, as the caller bails out if fixed_mode is
> NULL.
> 
> Otherwise LGTM, maybe Ville has more nitpicks? ;)

My only other nitpick is that this was cc:d to my wrong address.

> 
> BR,
> Jani.
> 
> > +
> > +	allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) |
> > +			   BIT(DRM_MODE_SCALE_FULLSCREEN) |
> > +			   BIT(DRM_MODE_SCALE_CENTER);
> > +
> > +	drm_connector_attach_scaling_mode_property(&connector->base,
> > +							allowed_scalers);
> > +
> > +	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
> > +
> > +	connector->base.display_info.panel_orientation =
> > +			intel_dsi_get_panel_orientation(connector);
> > +	drm_connector_init_panel_orientation_property(&connector->base,
> > +				connector->panel.fixed_mode->hdisplay,
> > +				connector->panel.fixed_mode->vdisplay);
> > +}
> > +
> >  void icl_dsi_init(struct drm_i915_private *dev_priv)
> >  {
> >  	struct drm_device *dev = &dev_priv->drm;
> > @@ -1601,6 +1629,8 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
> >  	}
> >  
> >  	icl_dphy_param_init(intel_dsi);
> > +
> > +	icl_dsi_add_properties(intel_connector);
> >  	return;
> >  
> >  err:
> > diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> > index e272d826210a..c8002ffd29e7 100644
> > --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> > +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> > @@ -1644,7 +1644,7 @@ vlv_dsi_get_panel_orientation(struct intel_connector *connector)
> >  	return intel_dsi_get_panel_orientation(connector);
> >  }
> >  
> > -static void intel_dsi_add_properties(struct intel_connector *connector)
> > +static void vlv_dsi_add_properties(struct intel_connector *connector)
> >  {
> >  	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> >  
> > @@ -1983,7 +1983,7 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
> >  	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
> >  	intel_panel_setup_backlight(connector, INVALID_PIPE);
> >  
> > -	intel_dsi_add_properties(intel_connector);
> > +	vlv_dsi_add_properties(intel_connector);
> >  
> >  	return;
> 
> -- 
> Jani Nikula, Intel Open Source Graphics Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-06-26 13:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-26  9:27 [V2] drm/i915: Add icl mipi dsi properties Vandita Kulkarni
2019-06-26 11:35 ` ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2019-06-26 12:04 ` ✓ Fi.CI.BAT: success " Patchwork
2019-06-26 12:53 ` [V2] " Jani Nikula
2019-06-26 13:59   ` Ville Syrjälä [this message]
2019-06-26 15:08     ` Kulkarni, Vandita
2019-06-26 20:25 ` ✓ Fi.CI.IGT: success for " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190626135908.GS5942@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.