All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@kernel.org>
To: Mike Looijmans <mike.looijmans@topic.nl>, linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, mturquette@baylibre.com,
	robh+dt@kernel.org, Mike Looijmans <mike.looijmans@topic.nl>
Subject: Re: [PATCH v3] clk: Add Si5341/Si5340 driver
Date: Thu, 27 Jun 2019 14:06:32 -0700	[thread overview]
Message-ID: <20190627210633.A21EC2075E@mail.kernel.org> (raw)
In-Reply-To: <20190517132352.31221-1-mike.looijmans@topic.nl>

Quoting Mike Looijmans (2019-05-17 06:23:52)
> Adds a driver for the Si5341 and Si5340 chips. The driver does not fully
> support all features of these chips, but allows the chip to be used
> without any support from the "clockbuilder pro" software.
> 
> If the chip is preprogrammed, that is, you bought one with some defaults
> burned in, or you programmed the NVM in some way, the driver will just
> take over the current settings and only change them on demand. Otherwise
> the input must be a fixed XTAL in its most basic configuration (no
> predividers, no feedback, etc.).
> 
> The driver supports dynamic changes of multisynth, output dividers and
> enabling or powering down outputs and multisynths.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---

Applied to clk-next + some fixes. I'm not super thrilled about the kHz
thing but we don't have a solution for it right now so might as well
come back to it later.

diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c
index 1a310835b53c..72424eb7e5f8 100644
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -374,7 +374,7 @@ static unsigned long si5341_clk_recalc_rate(struct clk_hw *hw,
 	 */
 	shift = 0;
 	res = m_num;
-	while (res & 0xffff00000000) {
+	while (res & 0xffff00000000ULL) {
 		++shift;
 		res >>= 1;
 	}
@@ -921,7 +921,7 @@ static int si5341_write_multiple(struct clk_si5341 *data,
 	return 0;
 }
 
-const struct si5341_reg_default si5341_preamble[] = {
+static const struct si5341_reg_default si5341_preamble[] = {
 	{ 0x0B25, 0x00 },
 	{ 0x0502, 0x01 },
 	{ 0x0505, 0x03 },
@@ -994,7 +994,7 @@ static const struct regmap_range si5341_regmap_volatile_range[] = {
 	regmap_reg_range(SI5341_SYNTH_N_UPD(4), SI5341_SYNTH_N_UPD(4)),
 };
 
-const struct regmap_access_table si5341_regmap_volatile = {
+static const struct regmap_access_table si5341_regmap_volatile = {
 	.yes_ranges = si5341_regmap_volatile_range,
 	.n_yes_ranges = ARRAY_SIZE(si5341_regmap_volatile_range),
 };
@@ -1016,7 +1016,6 @@ static const struct regmap_config si5341_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.cache_type = REGCACHE_RBTREE,
-	.max_register = 0,
 	.ranges = si5341_regmap_ranges,
 	.num_ranges = ARRAY_SIZE(si5341_regmap_ranges),
 	.max_register = SI5341_REGISTER_MAX,
@@ -1328,7 +1327,7 @@ MODULE_DEVICE_TABLE(i2c, si5341_id);
 static const struct of_device_id clk_si5341_of_match[] = {
 	{ .compatible = "silabs,si5340" },
 	{ .compatible = "silabs,si5341" },
-	{ },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, clk_si5341_of_match);
 


  reply	other threads:[~2019-06-27 21:06 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24  9:00 [PATCH] clk: Add Si5341/Si5340 driver Mike Looijmans
2019-04-25  6:42 ` Mike Looijmans
2019-04-25 23:36 ` Stephen Boyd
2019-04-25 23:36   ` Stephen Boyd
2019-04-26  7:53   ` Mike Looijmans
2019-05-17 13:23 ` [PATCH v3] " Mike Looijmans
2019-06-27 21:06   ` Stephen Boyd [this message]
2019-06-28  6:42     ` Mike Looijmans
2019-06-28 20:25       ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190627210633.A21EC2075E@mail.kernel.org \
    --to=sboyd@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mike.looijmans@topic.nl \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.