From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Seiderer Date: Wed, 10 Jul 2019 17:38:53 +0200 Subject: [Buildroot] [PATCH] configs/beaglebone: increase rootfs image size In-Reply-To: <1562705654-1620-1-git-send-email-pjtexier@koncepto.io> References: <1562705654-1620-1-git-send-email-pjtexier@koncepto.io> Message-ID: <20190710173853.1f96e165@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Pierre-Jean, On Tue, 9 Jul 2019 22:54:14 +0200, Pierre-Jean Texier wrote: > The default rootfs image size is too small (60M). > So, increase it to 120M. > > Fixes: > > Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "koi8_r.py" > mkfs.ext4: Could not allocate block in ext2 filesystem while populating file system > *** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE) > > Signed-off-by: Pierre-Jean Texier > --- > configs/beaglebone_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig > index b4f152f..0ba3310 100644 > --- a/configs/beaglebone_defconfig > +++ b/configs/beaglebone_defconfig > @@ -13,6 +13,7 @@ BR2_LINUX_KERNEL_DTS_SUPPORT=y > BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk" > BR2_TARGET_ROOTFS_EXT2=y > BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" Tested with buildroot master, no change: $ make O=$PWD -C ../buildroot_git beaglebone_defconfig $ make $ mount -t ext4 -o loop images/rootfs.ext4 /mnt/ $ df /mnt/ Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop0 55397 15029 36068 30% /mnt $ umount /mnt Still plenty of space available.... $ find . -name koi8_r.py No koi8_r.py found, you enabled some additional options? Regards, Peter > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > BR2_TARGET_UBOOT_CUSTOM_VERSION=y