From: Ludovic Desroches <ludovic.desroches@microchip.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] configs/atmel: bump to linux4sam_6.1
Date: Thu, 11 Jul 2019 11:19:51 +0200 [thread overview]
Message-ID: <20190711091951.21129-1-ludovic.desroches@microchip.com> (raw)
Only the atmel_sama5d27_som1 board uses the linux4sam_6.1 release. Bump
other boards to this new version.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
configs/at91sam9x5ek_defconfig | 6 +++---
configs/at91sam9x5ek_dev_defconfig | 6 +++---
configs/at91sam9x5ek_mmc_defconfig | 6 +++---
configs/at91sam9x5ek_mmc_dev_defconfig | 6 +++---
configs/atmel_sama5d2_xplained_mmc_defconfig | 6 +++---
configs/atmel_sama5d2_xplained_mmc_dev_defconfig | 6 +++---
configs/atmel_sama5d3_xplained_defconfig | 6 +++---
configs/atmel_sama5d3_xplained_dev_defconfig | 6 +++---
configs/atmel_sama5d3_xplained_mmc_defconfig | 6 +++---
configs/atmel_sama5d3_xplained_mmc_dev_defconfig | 6 +++---
configs/atmel_sama5d4_xplained_defconfig | 6 +++---
configs/atmel_sama5d4_xplained_dev_defconfig | 6 +++---
configs/atmel_sama5d4_xplained_mmc_defconfig | 6 +++---
configs/atmel_sama5d4_xplained_mmc_dev_defconfig | 6 +++---
14 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/configs/at91sam9x5ek_defconfig b/configs/at91sam9x5ek_defconfig
index 9dd8fbb367..03cc4954ea 100644
--- a/configs/at91sam9x5ek_defconfig
+++ b/configs/at91sam9x5ek_defconfig
@@ -1,7 +1,7 @@
BR2_arm=y
BR2_arm926t=y
# Linux headers same as kernel, a 4.4 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_5.8)/linux-linux4sam_5.8.tar.gz"
@@ -15,13 +15,13 @@ BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eknf_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_nandflash"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_SAM_BA=y
diff --git a/configs/at91sam9x5ek_dev_defconfig b/configs/at91sam9x5ek_dev_defconfig
index 505be8d047..f2709e0058 100644
--- a/configs/at91sam9x5ek_dev_defconfig
+++ b/configs/at91sam9x5ek_dev_defconfig
@@ -3,7 +3,7 @@ BR2_arm=y
BR2_arm926t=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
@@ -84,13 +84,13 @@ BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eknf_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_nandflash"
BR2_TARGET_UBOOT_NEEDS_DTC=y
diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig
index 8777606fe1..c72dddf3e2 100644
--- a/configs/at91sam9x5ek_mmc_defconfig
+++ b/configs/at91sam9x5ek_mmc_defconfig
@@ -3,7 +3,7 @@ BR2_arm=y
BR2_arm926t=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Creation of the SD card image
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
@@ -25,13 +25,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eksd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_ENVIMAGE=y
diff --git a/configs/at91sam9x5ek_mmc_dev_defconfig b/configs/at91sam9x5ek_mmc_dev_defconfig
index cd65912883..b7a6f955d0 100644
--- a/configs/at91sam9x5ek_mmc_dev_defconfig
+++ b/configs/at91sam9x5ek_mmc_dev_defconfig
@@ -3,7 +3,7 @@ BR2_arm=y
BR2_arm926t=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
@@ -86,13 +86,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eksd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9x5ek_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_ENVIMAGE=y
diff --git a/configs/atmel_sama5d2_xplained_mmc_defconfig b/configs/atmel_sama5d2_xplained_mmc_defconfig
index 57ced6940f..12ac1fab2f 100644
--- a/configs/atmel_sama5d2_xplained_mmc_defconfig
+++ b/configs/atmel_sama5d2_xplained_mmc_defconfig
@@ -3,7 +3,7 @@ BR2_cortex_a5=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d2_xplained_mmc/genimage.cfg"
BR2_LINUX_KERNEL=y
@@ -17,13 +17,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d2_xplainedsd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
diff --git a/configs/atmel_sama5d2_xplained_mmc_dev_defconfig b/configs/atmel_sama5d2_xplained_mmc_dev_defconfig
index e140a44e45..590f9d8a18 100644
--- a/configs/atmel_sama5d2_xplained_mmc_dev_defconfig
+++ b/configs/atmel_sama5d2_xplained_mmc_dev_defconfig
@@ -6,7 +6,7 @@ BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
@@ -89,13 +89,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d2_xplainedsd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
diff --git a/configs/atmel_sama5d3_xplained_defconfig b/configs/atmel_sama5d3_xplained_defconfig
index b8b33c5e78..314ae44506 100644
--- a/configs/atmel_sama5d3_xplained_defconfig
+++ b/configs/atmel_sama5d3_xplained_defconfig
@@ -2,7 +2,7 @@ BR2_arm=y
BR2_cortex_a5=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_5.8)/linux-linux4sam_5.8.tar.gz"
@@ -16,13 +16,13 @@ BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3_xplainednf_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3_xplained_nandflash"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_SAM_BA=y
diff --git a/configs/atmel_sama5d3_xplained_dev_defconfig b/configs/atmel_sama5d3_xplained_dev_defconfig
index 520cbc833d..ffad9a5bbd 100644
--- a/configs/atmel_sama5d3_xplained_dev_defconfig
+++ b/configs/atmel_sama5d3_xplained_dev_defconfig
@@ -5,7 +5,7 @@ BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
@@ -86,13 +86,13 @@ BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3_xplainednf_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3_xplained_nandflash"
BR2_TARGET_UBOOT_NEEDS_DTC=y
diff --git a/configs/atmel_sama5d3_xplained_mmc_defconfig b/configs/atmel_sama5d3_xplained_mmc_defconfig
index 8fd9a7c2f8..2d40a7b86c 100644
--- a/configs/atmel_sama5d3_xplained_mmc_defconfig
+++ b/configs/atmel_sama5d3_xplained_mmc_defconfig
@@ -2,7 +2,7 @@ BR2_arm=y
BR2_cortex_a5=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d3_xplained_mmc/genimage.cfg"
BR2_LINUX_KERNEL=y
@@ -16,13 +16,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3_xplainedsd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3_xplained_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
diff --git a/configs/atmel_sama5d3_xplained_mmc_dev_defconfig b/configs/atmel_sama5d3_xplained_mmc_dev_defconfig
index da1c4eb73e..37e9bc05ca 100644
--- a/configs/atmel_sama5d3_xplained_mmc_dev_defconfig
+++ b/configs/atmel_sama5d3_xplained_mmc_dev_defconfig
@@ -5,7 +5,7 @@ BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
@@ -88,13 +88,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3_xplainedsd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3_xplained_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
diff --git a/configs/atmel_sama5d4_xplained_defconfig b/configs/atmel_sama5d4_xplained_defconfig
index 522f7fc9d8..b4884ac9e2 100644
--- a/configs/atmel_sama5d4_xplained_defconfig
+++ b/configs/atmel_sama5d4_xplained_defconfig
@@ -3,7 +3,7 @@ BR2_cortex_a5=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_5.8)/linux-linux4sam_5.8.tar.gz"
@@ -20,13 +20,13 @@ BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d4_xplainednf_uboot_secure"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d4_xplained_nandflash"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_SAM_BA=y
diff --git a/configs/atmel_sama5d4_xplained_dev_defconfig b/configs/atmel_sama5d4_xplained_dev_defconfig
index 9197564c20..60e5d55271 100644
--- a/configs/atmel_sama5d4_xplained_dev_defconfig
+++ b/configs/atmel_sama5d4_xplained_dev_defconfig
@@ -6,7 +6,7 @@ BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
@@ -90,13 +90,13 @@ BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d4_xplainednf_uboot_secure"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d4_xplained_nandflash"
BR2_TARGET_UBOOT_NEEDS_DTC=y
diff --git a/configs/atmel_sama5d4_xplained_mmc_defconfig b/configs/atmel_sama5d4_xplained_mmc_defconfig
index f69acb288a..6d12df5903 100644
--- a/configs/atmel_sama5d4_xplained_mmc_defconfig
+++ b/configs/atmel_sama5d4_xplained_mmc_defconfig
@@ -3,7 +3,7 @@ BR2_cortex_a5=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d4_xplained_mmc/genimage.cfg"
BR2_LINUX_KERNEL=y
@@ -17,13 +17,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d4_xplainedsd_uboot_secure"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d4_xplained_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
diff --git a/configs/atmel_sama5d4_xplained_mmc_dev_defconfig b/configs/atmel_sama5d4_xplained_mmc_dev_defconfig
index cfac503fa4..e7f3f72d76 100644
--- a/configs/atmel_sama5d4_xplained_mmc_dev_defconfig
+++ b/configs/atmel_sama5d4_xplained_mmc_dev_defconfig
@@ -6,7 +6,7 @@ BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
# Needed for some packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Needed for gdb
@@ -89,13 +89,13 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.13"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d4_xplainedsd_uboot_secure"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_6.1"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d4_xplained_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
--
2.20.1
next reply other threads:[~2019-07-11 9:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-11 9:19 Ludovic Desroches [this message]
2019-07-14 13:16 ` [Buildroot] [PATCH] configs/atmel: bump to linux4sam_6.1 Thomas Petazzoni
2019-07-15 9:07 ` Ludovic Desroches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190711091951.21129-1-ludovic.desroches@microchip.com \
--to=ludovic.desroches@microchip.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.