From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Tao Xu <tao3.xu@intel.com>
Cc: pbonzini@redhat.com, rkrcmar@redhat.com, corbet@lwn.net,
tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
hpa@zytor.com, kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
fenghua.yu@intel.com, xiaoyao.li@linux.intel.com,
jingqi.liu@intel.com
Subject: Re: [PATCH v7 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL
Date: Fri, 12 Jul 2019 08:52:02 -0700 [thread overview]
Message-ID: <20190712155202.GC29659@linux.intel.com> (raw)
In-Reply-To: <20190712082907.29137-3-tao3.xu@intel.com>
On Fri, Jul 12, 2019 at 04:29:06PM +0800, Tao Xu wrote:
> diff --git a/arch/x86/kernel/cpu/umwait.c b/arch/x86/kernel/cpu/umwait.c
> index 6a204e7336c1..631152a67c6e 100644
> --- a/arch/x86/kernel/cpu/umwait.c
> +++ b/arch/x86/kernel/cpu/umwait.c
> @@ -15,7 +15,8 @@
> * Cache IA32_UMWAIT_CONTROL MSR. This is a systemwide control. By default,
> * umwait max time is 100000 in TSC-quanta and C0.2 is enabled
> */
> -static u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLE);
> +u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLE);
> +EXPORT_SYMBOL_GPL(umwait_control_cached);
It'd probably be better to add an accessor to expose umwait_control_cached
given that umwait.c is using {READ,WRITE}_ONCE() and there shouldn't be a
need to write it outside of umwait.c.
> /*
> * Serialize access to umwait_control_cached and IA32_UMWAIT_CONTROL MSR in
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index f411c9ae5589..0787f140d155 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -1676,6 +1676,12 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
> #endif
> case MSR_EFER:
> return kvm_get_msr_common(vcpu, msr_info);
> + case MSR_IA32_UMWAIT_CONTROL:
> + if (!msr_info->host_initiated && !vmx_has_waitpkg(vmx))
> + return 1;
> +
> + msr_info->data = vmx->msr_ia32_umwait_control;
> + break;
> case MSR_IA32_SPEC_CTRL:
> if (!msr_info->host_initiated &&
> !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
> @@ -1838,6 +1844,16 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
> return 1;
> vmcs_write64(GUEST_BNDCFGS, data);
> break;
> + case MSR_IA32_UMWAIT_CONTROL:
> + if (!msr_info->host_initiated && !vmx_has_waitpkg(vmx))
> + return 1;
> +
> + /* The reserved bit IA32_UMWAIT_CONTROL[1] should be zero */
> + if (data & BIT_ULL(1))
> + return 1;
> +
> + vmx->msr_ia32_umwait_control = data;
The SDM only defines bits 31:0, and the kernel uses a u32 to cache its
value. I assume bits 63:32 are reserved? I'm guessing we also need an
SDM update...
> + break;
> case MSR_IA32_SPEC_CTRL:
> if (!msr_info->host_initiated &&
> !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
> @@ -4139,6 +4155,8 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
> vmx->rmode.vm86_active = 0;
> vmx->spec_ctrl = 0;
>
> + vmx->msr_ia32_umwait_control = 0;
> +
> vcpu->arch.microcode_version = 0x100000000ULL;
> vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
> kvm_set_cr8(vcpu, 0);
> @@ -6352,6 +6370,19 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
> msrs[i].host, false);
> }
>
next prev parent reply other threads:[~2019-07-12 15:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 8:29 [PATCH v7 0/3] KVM: x86: Enable user wait instructions Tao Xu
2019-07-12 8:29 ` [PATCH v7 1/3] KVM: x86: add support for " Tao Xu
2019-07-12 15:13 ` Sean Christopherson
2019-07-15 1:11 ` Tao Xu
2019-07-12 8:29 ` [PATCH v7 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL Tao Xu
2019-07-12 15:52 ` Sean Christopherson [this message]
2019-07-15 1:22 ` Tao Xu
2019-07-15 14:16 ` Sean Christopherson
2019-07-16 16:03 ` Eduardo Habkost
2019-07-17 1:17 ` Tao Xu
2019-07-17 2:03 ` Tao Xu
2019-07-12 8:29 ` [PATCH v7 3/3] KVM: vmx: handle vm-exit for UMWAIT and TPAUSE Tao Xu
2019-07-12 16:03 ` Sean Christopherson
2019-07-13 14:22 ` Tao Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190712155202.GC29659@linux.intel.com \
--to=sean.j.christopherson@intel.com \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=jingqi.liu@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=tao3.xu@intel.com \
--cc=tglx@linutronix.de \
--cc=xiaoyao.li@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.