[PATCH v1 1/2] clk: tegra: divider: Fix missing check for enable-bit on rate's recalculation

[Dmitry Osipenko <digetx@gmail.com>]

Unset "enable" bit means that divider is in bypass mode, hence it doesn't
have any effect in that case.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-divider.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/tegra/clk-divider.c b/drivers/clk/tegra/clk-divider.c
index e76731fb7d69..f33c19045386 100644
--- a/drivers/clk/tegra/clk-divider.c
+++ b/drivers/clk/tegra/clk-divider.c
@@ -40,8 +40,13 @@ static unsigned long clk_frac_div_recalc_rate(struct clk_hw *hw,
 	int div, mul;
 	u64 rate = parent_rate;
 
-	reg = readl_relaxed(divider->reg) >> divider->shift;
-	div = reg & div_mask(divider);
+	reg = readl_relaxed(divider->reg);
+
+	if ((divider->flags & TEGRA_DIVIDER_UART) &&
+	    !(reg & PERIPH_CLK_UART_DIV_ENB))
+		return rate;
+
+	div = (reg >> divider->shift) & div_mask(divider);
 
 	mul = get_mul(divider);
 	div += mul;
-- 
2.22.0