From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] RTC for 5.3
Date: Tue, 16 Jul 2019 11:54:05 +0200 [thread overview]
Message-ID: <20190716095405.GA2449@piout.net> (raw)
Hello Linus,
A quiet cycle this time. I'm a bit late for this PR but I threw in a few
fixes instead of waiting for -rc1.
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-5.3
for you to fetch changes up to f0162d21cc8025c828fafe56ee25801f770f41da:
rtc: wm831x: Add IRQF_ONESHOT flag (2019-07-13 21:39:51 +0200)
----------------------------------------------------------------
RTC for 5.3
Drivers:
- ds1307: properly handle oscillator failure flags
- imx-sc: alarm support
- pcf2123: alarm support, correct offset handling
- sun6i: add R40 support
- simplify getting the adapter of an i2c client
----------------------------------------------------------------
Alexandre Belloni (3):
rtc: ds1307: properly handle oscillator failure flags
rtc: st-lpc: remove unnecessary check
rtc: pcf2123: fix negative offset rounding
Anson Huang (1):
rtc: imx-sc: add rtc alarm support
Chen-Yu Tsai (2):
rtc: pcf8563: Fix interrupt trigger method
rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
Dmitry Osipenko (1):
rtc: tegra: Drop MODULE_ALIAS
Dylan Howey (4):
rtc: pcf2123: remove sysfs register view
rtc: pcf2123: port to regmap
rtc: pcf2123: use %ptR
rtc: pcf2123: add alarm support
Hariprasad Kelam (1):
rtc: wm831x: Add IRQF_ONESHOT flag
Markus Elfring (1):
rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
Maxime Ripard (6):
dt-bindings: rtc: Add YAML schemas for the generic RTC bindings
dt-bindings: rtc: Move trivial RTC over to a schemas of their own
dt-bindings: rtc: Convert Allwinner A10 RTC to a schema
dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
dt-bindings: rtc: sun6i: Add the R40 RTC compatible
rtc: sun6i: Add R40 compatible
Michał Mirosław (2):
rtc: tps65910: remove superfluous Kconfig dependency
rtc: tps65910: fix typo in register name in read_alarm()
Nicholas Mc Guire (1):
rtc: ds2404: use hw endiannes variable
Puranjay Mohan (1):
rtc: interface: Change type of 'count' from int to u64
Richard Leitner (4):
rtc: s35390a: clarify INT2 pin output modes
rtc: s35390a: set uie_unsupported
rtc: s35390a: introduce struct device in probe
rtc: s35390a: change FLAG defines to use BIT macro
Roman Stratiienko (1):
rtc: test: enable wakeup flags
Thierry Reding (3):
rtc: tegra: checkpatch and miscellaneous cleanups
rtc: tegra: Use consistent variable names and types
rtc: tegra: Turn into regular driver
Wolfram Sang (5):
rtc: fm3130: simplify getting the adapter of a client
rtc: m41t80: simplify getting the adapter of a client
rtc: rv8803: simplify getting the adapter of a client
rtc: rx8010: simplify getting the adapter of a client
rtc: rx8025: simplify getting the adapter of a client
YueHaibing (1):
rtc: pcf2123: Fix build error
.../bindings/rtc/allwinner,sun4i-a10-rtc.yaml | 43 +++
.../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 134 ++++++++
Documentation/devicetree/bindings/rtc/rtc.txt | 73 +----
Documentation/devicetree/bindings/rtc/rtc.yaml | 50 +++
.../devicetree/bindings/rtc/sun6i-rtc.txt | 46 ---
.../devicetree/bindings/rtc/sunxi-rtc.txt | 17 -
.../devicetree/bindings/rtc/trivial-rtc.yaml | 92 ++++++
drivers/rtc/Kconfig | 3 +-
drivers/rtc/interface.c | 2 +-
drivers/rtc/rtc-ds1307.c | 129 ++++----
drivers/rtc/rtc-ds2404.c | 5 +-
drivers/rtc/rtc-fm3130.c | 8 +-
drivers/rtc/rtc-imx-sc.c | 87 +++++
drivers/rtc/rtc-m41t80.c | 2 +-
drivers/rtc/rtc-pcf2123.c | 354 ++++++++++-----------
drivers/rtc/rtc-pcf8563.c | 13 +-
drivers/rtc/rtc-rv8803.c | 2 +-
drivers/rtc/rtc-rx8010.c | 2 +-
drivers/rtc/rtc-rx8025.c | 2 +-
drivers/rtc/rtc-s35390a.c | 55 ++--
drivers/rtc/rtc-st-lpc.c | 4 -
drivers/rtc/rtc-stm32.c | 6 +-
drivers/rtc/rtc-sun6i.c | 1 +
drivers/rtc/rtc-tegra.c | 253 +++++++--------
drivers/rtc/rtc-test.c | 1 +
drivers/rtc/rtc-tps65910.c | 2 +-
drivers/rtc/rtc-wm831x.c | 3 +-
27 files changed, 821 insertions(+), 568 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/rtc.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
delete mode 100644 Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
create mode 100644 Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next reply other threads:[~2019-07-16 9:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-16 9:54 Alexandre Belloni [this message]
2019-07-17 17:15 ` [GIT PULL] RTC for 5.3 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190716095405.GA2449@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.