From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Sean Nyekjaer <sean@geanix.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.9 11/54] can: mcp251x: add support for mcp25625
Date: Thu, 18 Jul 2019 12:01:41 +0900 [thread overview]
Message-ID: <20190718030050.065226424@linuxfoundation.org> (raw)
In-Reply-To: <20190718030048.392549994@linuxfoundation.org>
[ Upstream commit 35b7fa4d07c43ad79b88e6462119e7140eae955c ]
Fully compatible with mcp2515, the mcp25625 have integrated transceiver.
This patch adds support for the mcp25625 to the existing mcp251x driver.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/spi/Kconfig | 5 +++--
drivers/net/can/spi/mcp251x.c | 25 ++++++++++++++++---------
2 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index 148cae5871a6..249d2db7d600 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -2,9 +2,10 @@ menu "CAN SPI interfaces"
depends on SPI
config CAN_MCP251X
- tristate "Microchip MCP251x SPI CAN controllers"
+ tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
depends on HAS_DMA
---help---
- Driver for the Microchip MCP251x SPI CAN controllers.
+ Driver for the Microchip MCP251x and MCP25625 SPI CAN
+ controllers.
endmenu
diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index f3f05fea8e1f..d8c448beab24 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -1,5 +1,5 @@
/*
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
*
* MCP2510 support and bug fixes by Christian Pellegrin
* <chripell@evolware.org>
@@ -41,7 +41,7 @@
* static struct spi_board_info spi_board_info[] = {
* {
* .modalias = "mcp2510",
- * // or "mcp2515" depending on your controller
+ * // "mcp2515" or "mcp25625" depending on your controller
* .platform_data = &mcp251x_info,
* .irq = IRQ_EINT13,
* .max_speed_hz = 2*1000*1000,
@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
enum mcp251x_model {
CAN_MCP251X_MCP2510 = 0x2510,
CAN_MCP251X_MCP2515 = 0x2515,
+ CAN_MCP251X_MCP25625 = 0x25625,
};
struct mcp251x_priv {
@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
}
MCP251X_IS(2510);
-MCP251X_IS(2515);
static void mcp251x_clean(struct net_device *net)
{
@@ -640,7 +640,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
/* Wait for oscillator startup timer after reset */
mdelay(MCP251X_OST_DELAY_MS);
-
+
reg = mcp251x_read_reg(spi, CANSTAT);
if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
return -ENODEV;
@@ -821,9 +821,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
/* receive buffer 0 */
if (intf & CANINTF_RX0IF) {
mcp251x_hw_rx(spi, 0);
- /*
- * Free one buffer ASAP
- * (The MCP2515 does this automatically.)
+ /* Free one buffer ASAP
+ * (The MCP2515/25625 does this automatically.)
*/
if (mcp251x_is_2510(spi))
mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
@@ -832,7 +831,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
/* receive buffer 1 */
if (intf & CANINTF_RX1IF) {
mcp251x_hw_rx(spi, 1);
- /* the MCP2515 does this automatically */
+ /* The MCP2515/25625 does this automatically. */
if (mcp251x_is_2510(spi))
clear_intf |= CANINTF_RX1IF;
}
@@ -1007,6 +1006,10 @@ static const struct of_device_id mcp251x_of_match[] = {
.compatible = "microchip,mcp2515",
.data = (void *)CAN_MCP251X_MCP2515,
},
+ {
+ .compatible = "microchip,mcp25625",
+ .data = (void *)CAN_MCP251X_MCP25625,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, mcp251x_of_match);
@@ -1020,6 +1023,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
.name = "mcp2515",
.driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2515,
},
+ {
+ .name = "mcp25625",
+ .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP25625,
+ },
{ }
};
MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
@@ -1260,5 +1267,5 @@ module_spi_driver(mcp251x_can_driver);
MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
"Christian Pellegrin <chripell@evolware.org>");
-MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
MODULE_LICENSE("GPL v2");
--
2.20.1
next prev parent reply other threads:[~2019-07-18 3:12 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 3:01 [PATCH 4.9 00/54] 4.9.186-stable review Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 01/54] crypto: talitos - rename alternative AEAD algos Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 02/54] Input: elantech - enable middle button support on 2 ThinkPads Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 03/54] samples, bpf: fix to change the buffer size for read() Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 04/54] staging:iio:ad7150: fix threshold mode config bit Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 05/54] mac80211: mesh: fix RCU warning Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 06/54] mac80211: free peer keys before vif down in mesh Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 07/54] mwifiex: Fix possible buffer overflows at parsing bss descriptor Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 08/54] netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 09/54] netfilter: ipv6: nf_defrag: accept duplicate fragments again Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 10/54] dt-bindings: can: mcp251x: add mcp25625 support Greg Kroah-Hartman
2019-07-18 3:01 ` Greg Kroah-Hartman [this message]
2019-07-18 3:01 ` [PATCH 4.9 12/54] Input: imx_keypad - make sure keyboard can always wake up system Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 13/54] KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 14/54] mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 15/54] ARM: davinci: da850-evm: call regulator_has_full_constraints() Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 16/54] ARM: davinci: da8xx: specify dma_coherent_mask for lcdc Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 17/54] mac80211: only warn once on chanctx_conf being NULL Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 18/54] md: fix for divide error in status_resync Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 19/54] bnx2x: Check if transceiver implements DDM before access Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 20/54] ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 21/54] net :sunrpc :clnt :Fix xps refcount imbalance on the error path Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 22/54] udf: Fix incorrect final NOT_ALLOCATED (hole) extent length Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 23/54] x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg() Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 24/54] x86/tls: Fix possible spectre-v1 in do_get_thread_area() Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 25/54] mwifiex: Abort at too short BSS descriptor element Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 26/54] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 27/54] fscrypt: dont set policy for a dead directory Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 28/54] mwifiex: Dont abort on small, spec-compliant vendor IEs Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 4.9 29/54] USB: serial: ftdi_sio: add ID for isodebug v1 Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 30/54] USB: serial: option: add support for GosunCn ME3630 RNDIS mode Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 31/54] Revert "serial: 8250: Dont service RX FIFO if interrupts are disabled" Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 32/54] p54usb: Fix race between disconnect and firmware loading Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 33/54] usb: gadget: ether: Fix race between gether_disconnect and rx_submit Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 34/54] usb: renesas_usbhs: add a workaround for a race condition of workqueue Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 35/54] staging: comedi: dt282x: fix a null pointer deref on interrupt Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 36/54] staging: comedi: amplc_pci230: fix " Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 37/54] carl9170: fix misuse of device driver API Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 38/54] VMCI: Fix integer overflow in VMCI handle arrays Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 39/54] MIPS: Remove superfluous check for __linux__ Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 40/54] Revert "e1000e: fix cyclic resets at link up with active tx" Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 41/54] e1000e: start network tx queue only when link is up Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 42/54] nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 43/54] arm64: crypto: remove accidentally backported files Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 44/54] perf/core: Fix perf_sample_regs_user() mm check Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 45/54] ARM: omap2: remove incorrect __init annotation Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 46/54] be2net: fix link failure after ethtool offline test Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 47/54] ppp: mppe: Add softdep to arc4 Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 48/54] sis900: fix TX completion Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 49/54] ARM: dts: imx6ul: fix PWM[1-4] interrupts Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 50/54] dm verity: use message limit for data block corruption message Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 51/54] ARC: hide unused function unw_hdr_alloc Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 52/54] s390: fix stfle zero padding Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 53/54] s390/qdio: (re-)initialize tiqdio list entries Greg Kroah-Hartman
2019-07-18 3:02 ` [PATCH 4.9 54/54] s390/qdio: dont touch the dsci in tiqdio_add_input_queues() Greg Kroah-Hartman
2019-07-18 7:13 ` [PATCH 4.9 00/54] 4.9.186-stable review kernelci.org bot
2019-07-18 8:30 ` Naresh Kamboju
2019-07-18 9:20 ` Jon Hunter
2019-07-18 9:20 ` Jon Hunter
2019-07-18 19:47 ` Guenter Roeck
2019-07-18 20:56 ` Kelsey Skunberg
2019-07-19 4:41 ` Bharath Vedartham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190718030050.065226424@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=sashal@kernel.org \
--cc=sean@geanix.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.