All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Lechner <david@lechnology.com>
To: linux-iio@vger.kernel.org, linux-omap@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: "David Lechner" <david@lechnology.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"William Breathitt Gray" <vilhelm.gray@gmail.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org
Subject: [PATCH 4/4] ARM: dts: am335x-boneblue: Enable eQEP
Date: Mon, 22 Jul 2019 10:45:38 -0500	[thread overview]
Message-ID: <20190722154538.5314-5-david@lechnology.com> (raw)
In-Reply-To: <20190722154538.5314-1-david@lechnology.com>

This enables the Enhanced Quadrature Encoder Pulse (eQEP) module for
connectors E1, E2 and E3 on BeagleBone Blue.

Signed-off-by: David Lechner <david@lechnology.com>
---
 arch/arm/boot/dts/am335x-boneblue.dts | 54 +++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 0257576d5d16..df3978ce061c 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -258,6 +258,30 @@
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
 		>;
 	};
+
+	/* E1 */
+	eqep0_pins: pinmux_eqep0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1)		/* (B12) mcasp0_aclkr.eQEP0A_in */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1)		/* (C13) mcasp0_fsr.eQEP0B_in */
+		>;
+	};
+
+	/* E2 */
+	eqep1_pins: pinmux_eqep1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2)		/* (V2) lcd_data12.eQEP1A_in */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2)		/* (V3) lcd_data13.eQEP1B_in */
+		>;
+	};
+
+	/* E3 */
+	eqep2_pins: pinmux_eqep2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4)		/* (T12) gpmc_ad12.eQEP2A_in */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4)		/* (R12) gpmc_ad13.eQEP2B_in */
+		>;
+	};
 };
 
 &uart0 {
@@ -530,3 +554,33 @@
 		line-name = "LS_BUF_EN";
 	};
 };
+
+&epwmss0 {
+	status = "okay";
+};
+
+&eqep0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep0_pins>;
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&eqep1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep1_pins>;
+};
+
+&epwmss2 {
+	status = "okay";
+};
+
+&eqep2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep2_pins>;
+};
-- 
2.17.1


  parent reply	other threads:[~2019-07-22 16:18 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22 15:45 [PATCH 0/4] new driver for TI eQEP David Lechner
2019-07-22 15:45 ` [PATCH 1/4] dt-bindings: counter: new bindings " David Lechner
2019-07-27 19:48   ` Jonathan Cameron
2019-08-02  7:25     ` William Breathitt Gray
2019-08-02 13:34       ` Rob Herring
2019-08-02 13:58         ` William Breathitt Gray
2019-07-22 15:45 ` [PATCH 2/4] counter: new TI eQEP driver David Lechner
2019-07-30 12:35   ` Uwe Kleine-König
2019-07-30 15:28     ` David Lechner
2019-08-02  9:27   ` William Breathitt Gray
2019-08-02 16:09     ` David Lechner
2019-08-02 16:17     ` David Lechner
2019-08-02 16:40       ` William Breathitt Gray
2019-07-22 15:45 ` [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP David Lechner
2019-07-23  8:42   ` Tony Lindgren
2019-07-23 14:45     ` David Lechner
2019-07-23 14:51       ` Tony Lindgren
2019-07-22 15:45 ` David Lechner [this message]
2019-07-25 12:40 ` [PATCH 0/4] new driver for TI eQEP William Breathitt Gray
2019-07-25 22:52   ` David Lechner
2019-07-27 19:45     ` Jonathan Cameron
2019-07-30  4:45     ` William Breathitt Gray
2019-08-01 17:37       ` David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190722154538.5314-5-david@lechnology.com \
    --to=david@lechnology.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=tony@atomide.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.