From: "Bruno E. O. Meneguele" <bmeneg@redhat.com>
To: Mimi Zohar <zohar@linux.ibm.com>
Cc: linux-integrity@vger.kernel.org,
Vitaly Chikunov <vt@altlinux.org>, Petr Vorel <pvorel@suse.cz>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Subject: Re: [PATCH v1] ima-evm-utils: use tsspcrread to read the TPM 2.0 PCRs
Date: Mon, 22 Jul 2019 18:55:12 -0300 [thread overview]
Message-ID: <20190722215512.GE27614@glitch> (raw)
In-Reply-To: <1563830080-31069-1-git-send-email-zohar@linux.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 4703 bytes --]
Hi Mirian,
On Mon, Jul 22, 2019 at 05:14:40PM -0400, Mimi Zohar wrote:
> The kernel does not expose the crypto agile TPM 2.0 PCR banks to
> userspace like it exposes PCRs for TPM 1.2. As a result, a userspace
> application is required to read PCRs.
>
> This patch adds tsspcrread support for reading the TPM 2.0 PCRs.
> tsspcrread is one application included in the ibmtss package.
>
> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
> ---
> Changelog v1:
> - Based on Vitaly's review, test the popen "cmd" return code. Use
> pclose to determine if the result of the popen command succeeded or
> failed. Removed the now unneeded checking for spaces.
> - Dynamically allocated the error msg and other changes based on
> Vitaly's review.
> - Based on Bruno's review, reverted the return code change. At some
> point, we'll need to re-visit the return codes in general.
>
> configure.ac | 3 +++
> src/Makefile.am | 3 +++
> src/evmctl.c | 48 ++++++++++++++++++++++++++++++++++++++++++++----
> 3 files changed, 50 insertions(+), 4 deletions(-)
>
> diff --git a/configure.ac b/configure.ac
> index 9beb4b6c2377..40fea93fef2f 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -28,6 +28,8 @@ PKG_CHECK_MODULES(LIBCRYPTO, [libcrypto >= 0.9.8 ])
> AC_SUBST(KERNEL_HEADERS)
> AC_CHECK_HEADER(unistd.h)
> AC_CHECK_HEADERS(openssl/conf.h)
> +AC_SEARCH_LIBS(TSS_Transmit, ibmtss, [have_ibmtss=yes], [have_ibmtss=no])
> +AM_CONDITIONAL([CONFIG_IBMTSS], [test "x$have_ibmtss" = "xyes"])
>
> AC_CHECK_HEADERS(sys/xattr.h, , [AC_MSG_ERROR([sys/xattr.h header not found. You need the c-library development package.])])
> AC_CHECK_HEADERS(keyutils.h, , [AC_MSG_ERROR([keyutils.h header not found. You need the libkeyutils development package.])])
> @@ -71,4 +73,5 @@ echo
> echo "Configuration:"
> echo " debug: $pkg_cv_enable_debug"
> echo " openssl-conf: $enable_openssl_conf"
> +echo " ibmtss: $have_ibmtss"
> echo
> diff --git a/src/Makefile.am b/src/Makefile.am
> index 9c037e21dc4f..f0990fb01210 100644
> --- a/src/Makefile.am
> +++ b/src/Makefile.am
> @@ -21,6 +21,9 @@ evmctl_SOURCES = evmctl.c
> evmctl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
> evmctl_LDFLAGS = $(LDFLAGS_READLINE)
> evmctl_LDADD = $(LIBCRYPTO_LIBS) -lkeyutils libimaevm.la
> +if CONFIG_IBMTSS
> +evmctl_CFLAGS = -DIBMTSS
> +endif
>
> AM_CPPFLAGS = -I$(top_srcdir) -include config.h
>
> diff --git a/src/evmctl.c b/src/evmctl.c
> index 9e0926f10404..f726b2186678 100644
> --- a/src/evmctl.c
> +++ b/src/evmctl.c
> @@ -1383,10 +1383,8 @@ static int tpm_pcr_read(int idx, uint8_t *pcr, int len)
> if (!fp)
> fp = fopen(misc_pcrs, "r");
>
> - if (!fp) {
> - log_err("Unable to open %s or %s\n", pcrs, misc_pcrs);
> + if (!fp)
> return -1;
> - }
>
> for (;;) {
> p = fgets(buf, sizeof(buf), fp);
> @@ -1402,6 +1400,32 @@ static int tpm_pcr_read(int idx, uint8_t *pcr, int len)
> return result;
> }
>
> +#ifdef IBMTSS
> +static int tpm_pcr_read2(int idx, uint8_t *hwpcr, int len, char **errmsg)
> +{
> + FILE *fp;
> + char pcr[100]; /* may contain an error */
> + char cmd[36];
> + int ret;
> +
> + sprintf(cmd, "tsspcrread -halg sha1 -ha %d -ns", idx);
> + fp = popen(cmd, "r");
> + if (!fp)
> + return -1;
If popen() call fails, **errmsg won't be allocated and will crash in
ima_measurement() when it make use of errmsg within if(err), see below.
> +
> + fgets(pcr, sizeof(pcr), fp);
> +
> + /* get the popen "cmd" return code */
> + ret = pclose(fp);
> + if (!ret)
> + hex2bin(hwpcr, pcr, SHA_DIGEST_LENGTH);
> + else
> + *errmsg = strdup(pcr);
*errmsg is allocated only in case popen runs fine.
> +
> + return ret;
> +}
> +#endif
> +
> #define TCG_EVENT_NAME_LEN_MAX 255
>
> struct template_entry {
> @@ -1658,8 +1682,24 @@ static int ima_measurement(const char *file)
> log_info("PCRAgg %.2d: ", i);
> log_dump(pcr[i], SHA_DIGEST_LENGTH);
>
> - if (tpm_pcr_read(i, hwpcr, sizeof(hwpcr)))
> + if (tpm_pcr_read(i, hwpcr, sizeof(hwpcr))) {
> +#ifdef IBMTSS
> + char *errmsg = NULL;
> +
> + err = tpm_pcr_read2(i, hwpcr, sizeof(hwpcr), &errmsg);
> + if (err) {
> + errmsg[strlen(errmsg) - 1] = 0;
crash here: errmsg wasn't initialized within tpm_pcr_read2().
> +
> + log_info("Failed to read either TPM 1.2 or TPM 2.0 PCRs.\n (%s)\n", errmsg);
> + free(errmsg);
> + exit(1);
> + }
> +#else
> + log_info("Failed to read TPM 1.2 PCRs.\n");
> exit(1);
> +#endif
> + }
> +
> log_info("HW PCR-%d: ", i);
> log_dump(hwpcr, sizeof(hwpcr));
>
> --
> 2.7.5
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2019-07-22 21:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 21:14 [PATCH v1] ima-evm-utils: use tsspcrread to read the TPM 2.0 PCRs Mimi Zohar
2019-07-22 21:55 ` Bruno E. O. Meneguele [this message]
2019-07-23 7:15 ` Petr Vorel
2019-07-23 13:27 ` Bruno E. O. Meneguele
2019-07-23 15:14 ` Mimi Zohar
2019-07-24 7:24 ` Petr Vorel
2019-07-24 13:56 ` Exposing the tpm 2.0 PCRs? (renamed subject) Mimi Zohar
2019-08-01 17:34 ` Jarkko Sakkinen
2019-08-01 19:58 ` Matthew Garrett
2019-08-02 19:36 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190722215512.GE27614@glitch \
--to=bmeneg@redhat.com \
--cc=dbaryshkov@gmail.com \
--cc=linux-integrity@vger.kernel.org \
--cc=pvorel@suse.cz \
--cc=vt@altlinux.org \
--cc=zohar@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.