From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 0/2] Add board support for iMX8QXP AI_ML board
Date: Wed, 24 Jul 2019 09:52:53 +0200 [thread overview]
Message-ID: <20190724095253.4474773b@jawa> (raw)
In-Reply-To: <20190719065743.28192-1-manivannan.sadhasivam@linaro.org>
Hi Manivannan,
> Hello,
>
> This patchset adds initial board support for iMX8QXP AI_ML board
> from Einfochips. This board is one of the Consumer Edition and AI
> boards of the 96Boards family.
>
> This initial supports contains following peripherals which are tested
> and known to work:
>
> 1. Debug serial via UART2
> 2. SD card
> 3. Ethernet
>
Please paste the output when u-boot boots for this board (from the SPL
banner to Linux booting).
> Thanks,
> Mani
>
> Note: This patchset depends on the below cleanup patches submitted:
> [U-Boot,1/2] arm: imx8: factor out uart init code
> [U-Boot,2/2] arm: imx8: don't duplicate build_info()
>
> Changes in v4:
>
> * Incorporated review comments from Fabio.
>
> Changes in v3:
>
> * Incorporated review comments from Fabio. Major change is switching
> to distro_boot.
> * Added Reviewed-by tag from Peng Fan.
>
> Changes in v2:
>
> * Rebased the patches on top of following patches:
> [U-Boot,1/2] arm: imx8: factor out uart init code
> [U-Boot,2/2] arm: imx8: don't duplicate build_info()
>
> Manivannan Sadhasivam (2):
> arm: dts: Add devicetree support for iMXQXP AI_ML board
> board: Add support for iMX8QXP AI_ML board
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi | 117 +++++++++++
> arch/arm/dts/fsl-imx8qxp-ai_ml.dts | 181
> ++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig |
> 6 + board/einfochips/imx8qxp_ai_ml/Kconfig | 12 ++
> board/einfochips/imx8qxp_ai_ml/MAINTAINERS | 6 +
> board/einfochips/imx8qxp_ai_ml/Makefile | 8 +
> board/einfochips/imx8qxp_ai_ml/README | 49 +++++
> .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c | 117 +++++++++++
> board/einfochips/imx8qxp_ai_ml/imximage.cfg | 24 +++
> board/einfochips/imx8qxp_ai_ml/spl.c | 49 +++++
> configs/imx8qxp_ai_ml_defconfig | 83 ++++++++
> include/configs/imx8qxp_ai_ml.h | 104 ++++++++++
> 13 files changed, 757 insertions(+)
> create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
> create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml.dts
> create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig
> create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile
> create mode 100644 board/einfochips/imx8qxp_ai_ml/README
> create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg
> create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c
> create mode 100644 configs/imx8qxp_ai_ml_defconfig
> create mode 100644 include/configs/imx8qxp_ai_ml.h
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190724/7c8b64df/attachment.sig>
prev parent reply other threads:[~2019-07-24 7:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-19 6:57 [U-Boot] [PATCH v4 0/2] Add board support for iMX8QXP AI_ML board Manivannan Sadhasivam
2019-07-19 6:57 ` [U-Boot] [PATCH v4 1/2] arm: dts: Add devicetree support for iMXQXP " Manivannan Sadhasivam
2019-07-24 7:55 ` Lukasz Majewski
2019-07-25 1:44 ` Peng Fan
2019-07-19 6:57 ` [U-Boot] [PATCH v4 2/2] board: Add support for iMX8QXP " Manivannan Sadhasivam
2019-07-24 8:07 ` Lukasz Majewski
2019-08-15 7:30 ` Manivannan Sadhasivam
2019-08-15 7:51 ` Lukasz Majewski
2019-08-15 8:16 ` Manivannan Sadhasivam
2019-08-15 8:30 ` Lukasz Majewski
2019-07-24 7:52 ` Lukasz Majewski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190724095253.4474773b@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.