All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steve Capper <steve.capper@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: crecklin@redhat.com, ard.biesheuvel@linaro.org,
	catalin.marinas@arm.com, bhsharma@redhat.com,
	Steve Capper <steve.capper@arm.com>,
	maz@kernel.org, will@kernel.org
Subject: [PATCH V4 07/11] arm64: mm: Logic to make offset_ttbr1 conditional
Date: Mon, 29 Jul 2019 17:21:13 +0100	[thread overview]
Message-ID: <20190729162117.832-8-steve.capper@arm.com> (raw)
In-Reply-To: <20190729162117.832-1-steve.capper@arm.com>

When running with a 52-bit userspace VA and a 48-bit kernel VA we offset
ttbr1_el1 to allow the kernel pagetables with a 52-bit PTRS_PER_PGD to
be used for both userspace and kernel.

Moving on to a 52-bit kernel VA we no longer require this offset to
ttbr1_el1 should we be running on a system with HW support for 52-bit
VAs.

This patch introduces conditional logic to offset_ttbr1 to query
SYS_ID_AA64MMFR2_EL1 whenever 52-bit VAs are selected. If there is HW
support for 52-bit VAs then the ttbr1 offset is skipped.

We choose to read a system register rather than vabits_actual because
offset_ttbr1 can be called in places where the kernel data is not
actually mapped.

Calls to offset_ttbr1 appear to be made from rarely called code paths so
this extra logic is not expected to adversely affect performance.

Signed-off-by: Steve Capper <steve.capper@arm.com>
---

Changed in V3, move away from alternative framework as offset_ttbr1 can
be called in places before the alternative framework has been
initialised.
---
 arch/arm64/include/asm/assembler.h | 12 ++++++++++--
 arch/arm64/kernel/head.S           |  2 +-
 arch/arm64/kernel/hibernate-asm.S  |  8 ++++----
 arch/arm64/mm/proc.S               |  6 +++---
 4 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index e3a15c751b13..ede368bafa2c 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -538,9 +538,17 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
  * In future this may be nop'ed out when dealing with 52-bit kernel VAs.
  * 	ttbr: Value of ttbr to set, modified.
  */
-	.macro	offset_ttbr1, ttbr
+	.macro	offset_ttbr1, ttbr, tmp
 #ifdef CONFIG_ARM64_USER_VA_BITS_52
 	orr	\ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET
+#endif
+
+#ifdef CONFIG_ARM64_VA_BITS_52
+	mrs_s	\tmp, SYS_ID_AA64MMFR2_EL1
+	and	\tmp, \tmp, #(0xf << ID_AA64MMFR2_LVA_SHIFT)
+	cbnz	\tmp, .Lskipoffs_\@
+	orr	\ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET
+.Lskipoffs_\@ :
 #endif
 	.endm
 
@@ -550,7 +558,7 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
  * to be nop'ed out when dealing with 52-bit kernel VAs.
  */
 	.macro	restore_ttbr1, ttbr
-#ifdef CONFIG_ARM64_USER_VA_BITS_52
+#if defined(CONFIG_ARM64_USER_VA_BITS_52) || defined(CONFIG_ARM64_VA_BITS_52)
 	bic	\ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET
 #endif
 	.endm
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 6dc7349868d9..a96dc4386c7c 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -777,7 +777,7 @@ ENTRY(__enable_mmu)
 	phys_to_ttbr x1, x1
 	phys_to_ttbr x2, x2
 	msr	ttbr0_el1, x2			// load TTBR0
-	offset_ttbr1 x1
+	offset_ttbr1 x1, x3
 	msr	ttbr1_el1, x1			// load TTBR1
 	isb
 	msr	sctlr_el1, x0
diff --git a/arch/arm64/kernel/hibernate-asm.S b/arch/arm64/kernel/hibernate-asm.S
index 2f4a2ce7264b..38bcd4d4e43b 100644
--- a/arch/arm64/kernel/hibernate-asm.S
+++ b/arch/arm64/kernel/hibernate-asm.S
@@ -22,14 +22,14 @@
  * Even switching to our copied tables will cause a changed output address at
  * each stage of the walk.
  */
-.macro break_before_make_ttbr_switch zero_page, page_table, tmp
+.macro break_before_make_ttbr_switch zero_page, page_table, tmp, tmp2
 	phys_to_ttbr \tmp, \zero_page
 	msr	ttbr1_el1, \tmp
 	isb
 	tlbi	vmalle1
 	dsb	nsh
 	phys_to_ttbr \tmp, \page_table
-	offset_ttbr1 \tmp
+	offset_ttbr1 \tmp, \tmp2
 	msr	ttbr1_el1, \tmp
 	isb
 .endm
@@ -70,7 +70,7 @@ ENTRY(swsusp_arch_suspend_exit)
 	 * We execute from ttbr0, change ttbr1 to our copied linear map tables
 	 * with a break-before-make via the zero page
 	 */
-	break_before_make_ttbr_switch	x5, x0, x6
+	break_before_make_ttbr_switch	x5, x0, x6, x8
 
 	mov	x21, x1
 	mov	x30, x2
@@ -101,7 +101,7 @@ ENTRY(swsusp_arch_suspend_exit)
 	dsb	ish		/* wait for PoU cleaning to finish */
 
 	/* switch to the restored kernels page tables */
-	break_before_make_ttbr_switch	x25, x21, x6
+	break_before_make_ttbr_switch	x25, x21, x6, x8
 
 	ic	ialluis
 	dsb	ish
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 7dbf2be470f6..8d289ff7584d 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -168,7 +168,7 @@ ENDPROC(cpu_do_switch_mm)
 .macro	__idmap_cpu_set_reserved_ttbr1, tmp1, tmp2
 	adrp	\tmp1, empty_zero_page
 	phys_to_ttbr \tmp2, \tmp1
-	offset_ttbr1 \tmp2
+	offset_ttbr1 \tmp2, \tmp1
 	msr	ttbr1_el1, \tmp2
 	isb
 	tlbi	vmalle1
@@ -187,7 +187,7 @@ ENTRY(idmap_cpu_replace_ttbr1)
 
 	__idmap_cpu_set_reserved_ttbr1 x1, x3
 
-	offset_ttbr1 x0
+	offset_ttbr1 x0, x3
 	msr	ttbr1_el1, x0
 	isb
 
@@ -362,7 +362,7 @@ __idmap_kpti_secondary:
 	cbnz	w18, 1b
 
 	/* All done, act like nothing happened */
-	offset_ttbr1 swapper_ttb
+	offset_ttbr1 swapper_ttb, x18
 	msr	ttbr1_el1, swapper_ttb
 	isb
 	ret
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-07-29 16:24 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-29 16:21 [PATCH V4 00/11] 52-bit kernel + user VAs Steve Capper
2019-07-29 16:21 ` [PATCH V4 01/11] arm64: mm: Remove bit-masking optimisations for PAGE_OFFSET and VMEMMAP_START Steve Capper
2019-08-05 11:07   ` Catalin Marinas
2019-07-29 16:21 ` [PATCH V4 02/11] arm64: mm: Flip kernel VA space Steve Capper
2019-08-05 11:29   ` Catalin Marinas
2019-08-05 11:50     ` Steve Capper
2019-07-29 16:21 ` [PATCH V4 03/11] arm64: kasan: Switch to using KASAN_SHADOW_OFFSET Steve Capper
2019-08-05 16:37   ` Catalin Marinas
2019-08-06  9:05     ` Steve Capper
2019-07-29 16:21 ` [PATCH V4 04/11] arm64: dump: De-constify VA_START and KASAN_SHADOW_START Steve Capper
2019-08-05 16:38   ` Catalin Marinas
2019-07-29 16:21 ` [PATCH V4 05/11] arm64: mm: Introduce VA_BITS_MIN Steve Capper
2019-08-05 17:17   ` Catalin Marinas
2019-08-05 17:20   ` Catalin Marinas
2019-08-06  9:11     ` Steve Capper
2019-07-29 16:21 ` [PATCH V4 06/11] arm64: mm: Introduce VA_BITS_ACTUAL Steve Capper
2019-08-05 17:26   ` Catalin Marinas
2019-08-06 11:32     ` Steve Capper
2019-08-06 14:48       ` Catalin Marinas
2019-08-07 13:27         ` Steve Capper
2019-07-29 16:21 ` Steve Capper [this message]
2019-08-05 17:06   ` [PATCH V4 07/11] arm64: mm: Logic to make offset_ttbr1 conditional Catalin Marinas
2019-07-29 16:21 ` [PATCH V4 08/11] arm64: mm: Separate out vmemmap Steve Capper
2019-08-05 17:07   ` Catalin Marinas
2019-07-29 16:21 ` [PATCH V4 09/11] arm64: mm: Modify calculation of VMEMMAP_SIZE Steve Capper
2019-08-05 17:10   ` Catalin Marinas
2019-07-29 16:21 ` [PATCH V4 10/11] arm64: mm: Introduce 52-bit Kernel VAs Steve Capper
2019-08-05 17:27   ` Catalin Marinas
2019-08-06 14:55   ` Catalin Marinas
2019-08-06 14:58     ` Catalin Marinas
2019-07-29 16:21 ` [PATCH V4 11/11] docs: arm64: Add layout and 52-bit info to memory document Steve Capper
2019-08-06 15:27   ` Catalin Marinas
2019-08-07 13:29     ` Steve Capper
2019-08-07 14:55       ` Will Deacon
2019-08-07 15:57         ` Steve Capper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190729162117.832-8-steve.capper@arm.com \
    --to=steve.capper@arm.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=bhsharma@redhat.com \
    --cc=catalin.marinas@arm.com \
    --cc=crecklin@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.