[PATCH 2/2] dt-bindings: net: dsa: marvell: add property "marvell,led-control"

[Hubert Feurstein <h.feurstein@gmail.com>]

With this property it is possible to change the default behaviour of
the switch LEDs.

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
---
 Documentation/devicetree/bindings/net/dsa/marvell.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 30c11fea491b..5e094e37c76d 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -46,6 +46,16 @@ Optional properties:
 - mdio?		: Container of PHYs and devices on the external MDIO
 			  bus. The node must contains a compatible string of
 			  "marvell,mv88e6xxx-mdio-external"
+- marvell,led-control   : The register value for the LED control register (
+                          Control for LED 0 & 1). This property can be defined
+                          per port. Example:
+                            ports {
+                                  port@0 {
+                                          [...]
+                                          marvell,led-control = <0x11>
+                                  };
+                                  [...]
+                            }
 
 Example:
 
-- 
2.22.0