From: David Ahern <dsahern@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next] selftests: Add l2tp tests
Date: Thu, 1 Aug 2019 16:54:21 -0700 [thread overview]
Message-ID: <20190801235421.8344-1-dsahern@kernel.org> (raw)
From: David Ahern <dsahern@gmail.com>
Add IPv4 and IPv6 l2tp tests. Current set is over IP and with
IPsec.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
The ipsec tests expose a netdev refcount leak that I have not had
time to track down, but the tests themselves are good.
tools/testing/selftests/net/l2tp.sh | 382 ++++++++++++++++++++++++++++++++++++
1 file changed, 382 insertions(+)
create mode 100644 tools/testing/selftests/net/l2tp.sh
diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh
new file mode 100644
index 000000000000..5782433886fc
--- /dev/null
+++ b/tools/testing/selftests/net/l2tp.sh
@@ -0,0 +1,382 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# L2TPv3 tunnel between 2 hosts
+#
+# host-1 | router | host-2
+# | |
+# lo l2tp | | l2tp lo
+# 172.16.101.1 172.16.1.1 | | 172.16.1.2 172.16.101.2
+# fc00:101::1 fc00:1::1 | | fc00:1::2 fc00:101::2
+# | |
+# eth0 | | eth0
+# 10.1.1.1 | | 10.1.2.1
+# 2001:db8:1::1 | | 2001:db8:2::1
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+################################################################################
+#
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ printf "TEST: %-60s [ OK ]\n" "${msg}"
+ nsuccess=$((nsuccess+1))
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+}
+
+run_cmd()
+{
+ local ns
+ local cmd
+ local out
+ local rc
+
+ ns="$1"
+ shift
+ cmd="$*"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf " COMMAND: $cmd\n"
+ fi
+
+ out=$(eval ip netns exec ${ns} ${cmd} 2>&1)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+
+ return $rc
+}
+
+################################################################################
+# create namespaces and interconnects
+
+create_ns()
+{
+ local ns=$1
+ local addr=$2
+ local addr6=$3
+
+ [ -z "${addr}" ] && addr="-"
+ [ -z "${addr6}" ] && addr6="-"
+
+ ip netns add ${ns}
+
+ ip -netns ${ns} link set lo up
+ if [ "${addr}" != "-" ]; then
+ ip -netns ${ns} addr add dev lo ${addr}
+ fi
+ if [ "${addr6}" != "-" ]; then
+ ip -netns ${ns} -6 addr add dev lo ${addr6}
+ fi
+
+ ip -netns ${ns} ro add unreachable default metric 8192
+ ip -netns ${ns} -6 ro add unreachable default metric 8192
+
+ ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+ local ns1=$1
+ local ns1_dev=$2
+ local ns1_addr=$3
+ local ns1_addr6=$4
+ local ns2=$5
+ local ns2_dev=$6
+ local ns2_addr=$7
+ local ns2_addr6=$8
+
+ ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp
+ ip -netns ${ns1} li set ${ns1_dev} up
+ ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev}
+ ip -netns ${ns2} li set ${ns2_dev} up
+
+ if [ "${ns1_addr}" != "-" ]; then
+ ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr}
+ ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr}
+ fi
+
+ if [ "${ns1_addr6}" != "-" ]; then
+ ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6}
+ ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6}
+ fi
+}
+
+################################################################################
+# test setup
+
+cleanup()
+{
+ local ns
+
+ for ns in host-1 host-2 router
+ do
+ ip netns del ${ns} 2>/dev/null
+ done
+}
+
+setup_l2tp_ipv4()
+{
+ #
+ # configure l2tpv3 tunnel on host-1
+ #
+ ip -netns host-1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \
+ encap ip local 10.1.1.1 remote 10.1.2.1
+ ip -netns host-1 l2tp add session name l2tp4 tunnel_id 1041 \
+ session_id 1041 peer_session_id 1042
+ ip -netns host-1 link set dev l2tp4 up
+ ip -netns host-1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2
+
+ #
+ # configure l2tpv3 tunnel on host-2
+ #
+ ip -netns host-2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \
+ encap ip local 10.1.2.1 remote 10.1.1.1
+ ip -netns host-2 l2tp add session name l2tp4 tunnel_id 1042 \
+ session_id 1042 peer_session_id 1041
+ ip -netns host-2 link set dev l2tp4 up
+ ip -netns host-2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1
+
+ #
+ # add routes to loopback addresses
+ #
+ ip -netns host-1 ro add 172.16.101.2/32 via 172.16.1.2
+ ip -netns host-2 ro add 172.16.101.1/32 via 172.16.1.1
+}
+
+setup_l2tp_ipv6()
+{
+ #
+ # configure l2tpv3 tunnel on host-1
+ #
+ ip -netns host-1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \
+ encap ip local 2001:db8:1::1 remote 2001:db8:2::1
+ ip -netns host-1 l2tp add session name l2tp6 tunnel_id 1061 \
+ session_id 1061 peer_session_id 1062
+ ip -netns host-1 link set dev l2tp6 up
+ ip -netns host-1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2
+
+ #
+ # configure l2tpv3 tunnel on host-2
+ #
+ ip -netns host-2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \
+ encap ip local 2001:db8:2::1 remote 2001:db8:1::1
+ ip -netns host-2 l2tp add session name l2tp6 tunnel_id 1062 \
+ session_id 1062 peer_session_id 1061
+ ip -netns host-2 link set dev l2tp6 up
+ ip -netns host-2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1
+
+ #
+ # add routes to loopback addresses
+ #
+ ip -netns host-1 -6 ro add fc00:101::2/128 via fc00:1::2
+ ip -netns host-2 -6 ro add fc00:101::1/128 via fc00:1::1
+}
+
+setup()
+{
+ # start clean
+ cleanup
+
+ set -e
+ create_ns host-1 172.16.101.1/32 fc00:101::1/128
+ create_ns host-2 172.16.101.2/32 fc00:101::2/128
+ create_ns router
+
+ connect_ns host-1 eth0 10.1.1.1/24 2001:db8:1::1/64 \
+ router eth1 10.1.1.2/24 2001:db8:1::2/64
+
+ connect_ns host-2 eth0 10.1.2.1/24 2001:db8:2::1/64 \
+ router eth2 10.1.2.2/24 2001:db8:2::2/64
+
+ ip -netns host-1 ro add 10.1.2.0/24 via 10.1.1.2
+ ip -netns host-1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2
+
+ ip -netns host-2 ro add 10.1.1.0/24 via 10.1.2.2
+ ip -netns host-2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2
+
+ setup_l2tp_ipv4
+ setup_l2tp_ipv6
+ set +e
+}
+
+setup_ipsec()
+{
+ #
+ # IPv4
+ #
+ run_cmd host-1 ip xfrm policy add \
+ src 10.1.1.1 dst 10.1.2.1 dir out \
+ tmpl proto esp mode transport
+
+ run_cmd host-1 ip xfrm policy add \
+ src 10.1.2.1 dst 10.1.1.1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip xfrm policy add \
+ src 10.1.1.1 dst 10.1.2.1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip xfrm policy add \
+ src 10.1.2.1 dst 10.1.1.1 dir out \
+ tmpl proto esp mode transport
+
+ ip -netns host-1 xfrm state add \
+ src 10.1.1.1 dst 10.1.2.1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-1 xfrm state add \
+ src 10.1.2.1 dst 10.1.1.1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 xfrm state add \
+ src 10.1.1.1 dst 10.1.2.1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 xfrm state add \
+ src 10.1.2.1 dst 10.1.1.1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ #
+ # IPV6
+ #
+ run_cmd host-1 ip -6 xfrm policy add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 dir out \
+ tmpl proto esp mode transport
+
+ run_cmd host-1 ip -6 xfrm policy add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip -6 xfrm policy add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip -6 xfrm policy add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 dir out \
+ tmpl proto esp mode transport
+
+ ip -netns host-1 -6 xfrm state add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-1 -6 xfrm state add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 -6 xfrm state add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 -6 xfrm state add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+}
+
+teardown_ipsec()
+{
+ run_cmd host-1 ip xfrm state flush
+ run_cmd host-1 ip xfrm policy flush
+ run_cmd host-2 ip xfrm state flush
+ run_cmd host-2 ip xfrm policy flush
+}
+
+################################################################################
+# generate traffic through tunnel for various cases
+
+run_ping()
+{
+ local desc="$1"
+
+ run_cmd host-1 ping -c1 -w1 172.16.1.2
+ log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
+
+ run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+ log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
+
+ run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+ log_test $? 0 "IPv6 basic L2TP tunnel ${desc}"
+
+ run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+ log_test $? 0 "IPv6 route through L2TP tunnel ${desc}"
+}
+
+run_tests()
+{
+ local desc
+
+ setup
+ run_ping
+
+ setup_ipsec
+ run_ping "- with IPsec"
+ run_cmd host-1 ping -c1 -w1 172.16.1.2
+ log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
+
+ run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+ log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
+
+ run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+ log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec"
+
+ run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+ log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec"
+
+ teardown_ipsec
+ run_ping "- after IPsec teardown"
+}
+
+################################################################################
+# main
+
+declare -i nfail=0
+declare -i nsuccess=0
+
+while getopts :pv o
+do
+ case $o in
+ p) PAUSE_ON_FAIL=yes;;
+ v) VERBOSE=$(($VERBOSE + 1));;
+ *) exit 1;;
+ esac
+done
+
+run_tests
+cleanup
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n" ${nfail}
--
2.11.0
next reply other threads:[~2019-08-01 23:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 23:54 David Ahern [this message]
2019-08-05 20:20 ` [PATCH net-next] selftests: Add l2tp tests David Miller
2019-08-05 20:55 ` David Ahern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190801235421.8344-1-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=davem@davemloft.net \
--cc=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.