From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 15/44] powerpc/64s/exception: untangle early machine check handler branch
Date: Fri, 2 Aug 2019 20:56:40 +1000 [thread overview]
Message-ID: <20190802105709.27696-16-npiggin@gmail.com> (raw)
In-Reply-To: <20190802105709.27696-1-npiggin@gmail.com>
machine_check_early_common now branches to machine_check_handle_early
which is its only caller.
Move interleaving code out of the way, and remove the branch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 129 +++++++++++++--------------
1 file changed, 62 insertions(+), 67 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e01e762dc6cc..706c522e1d1b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -956,6 +956,16 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi)
TRAMP_KVM_SKIP(PACA_EXMC, 0x200)
+#define MACHINE_CHECK_HANDLER_WINDUP \
+ /* Clear MSR_RI before setting SRR0 and SRR1. */\
+ li r9,0; \
+ mtmsrd r9,1; /* Clear MSR_RI */ \
+ /* Decrement paca->in_mce now RI is clear. */ \
+ lhz r12,PACA_IN_MCE(r13); \
+ subi r12,r12,1; \
+ sth r12,PACA_IN_MCE(r13); \
+ EXCEPTION_RESTORE_REGS EXC_STD
+
EXC_COMMON_BEGIN(machine_check_early_common)
mtctr r10 /* Restore ctr */
mfspr r11,SPRN_SRR0
@@ -1011,74 +1021,7 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
li r10,MSR_RI
mtmsrd r10,1
- b machine_check_handle_early
-EXC_COMMON_BEGIN(machine_check_common)
- /*
- * Machine check is different because we use a different
- * save area: PACA_EXMC instead of PACA_EXGEN.
- */
- EXCEPTION_COMMON(PACA_EXMC, 0x200)
- FINISH_NAP
- RECONCILE_IRQ_STATE(r10, r11)
- ld r3,PACA_EXMC+EX_DAR(r13)
- lwz r4,PACA_EXMC+EX_DSISR(r13)
- /* Enable MSR_RI when finished with PACA_EXMC */
- li r10,MSR_RI
- mtmsrd r10,1
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
- bl save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl machine_check_exception
- b ret_from_except
-
-#define MACHINE_CHECK_HANDLER_WINDUP \
- /* Clear MSR_RI before setting SRR0 and SRR1. */\
- li r9,0; \
- mtmsrd r9,1; /* Clear MSR_RI */ \
- /* Decrement paca->in_mce now RI is clear. */ \
- lhz r12,PACA_IN_MCE(r13); \
- subi r12,r12,1; \
- sth r12,PACA_IN_MCE(r13); \
- EXCEPTION_RESTORE_REGS EXC_STD
-
-#ifdef CONFIG_PPC_P7_NAP
-/*
- * This is an idle wakeup. Low level machine check has already been
- * done. Queue the event then call the idle code to do the wake up.
- */
-EXC_COMMON_BEGIN(machine_check_idle_common)
- bl machine_check_queue_event
-
- /*
- * We have not used any non-volatile GPRs here, and as a rule
- * most exception code including machine check does not.
- * Therefore PACA_NAPSTATELOST does not need to be set. Idle
- * wakeup will restore volatile registers.
- *
- * Load the original SRR1 into r3 for pnv_powersave_wakeup_mce.
- *
- * Then decrement MCE nesting after finishing with the stack.
- */
- ld r3,_MSR(r1)
- ld r4,_LINK(r1)
-
- lhz r11,PACA_IN_MCE(r13)
- subi r11,r11,1
- sth r11,PACA_IN_MCE(r13)
-
- mtlr r4
- rlwinm r10,r3,47-31,30,31
- cmpwi cr1,r10,2
- bltlr cr1 /* no state loss, return to idle caller */
- b idle_return_gpr_loss
-#endif
- /*
- * Handle machine check early in real mode. We come here with
- * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
- */
-EXC_COMMON_BEGIN(machine_check_handle_early)
bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl machine_check_early
@@ -1157,6 +1100,58 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
EXCEPTION_PROLOG_1 EXC_STD, PACA_EXMC, 1, 0x200, 1, 1, 0
EXCEPTION_PROLOG_2_REAL machine_check_common, EXC_STD, 0
+EXC_COMMON_BEGIN(machine_check_common)
+ /*
+ * Machine check is different because we use a different
+ * save area: PACA_EXMC instead of PACA_EXGEN.
+ */
+ EXCEPTION_COMMON(PACA_EXMC, 0x200)
+ FINISH_NAP
+ RECONCILE_IRQ_STATE(r10, r11)
+ ld r3,PACA_EXMC+EX_DAR(r13)
+ lwz r4,PACA_EXMC+EX_DSISR(r13)
+ /* Enable MSR_RI when finished with PACA_EXMC */
+ li r10,MSR_RI
+ mtmsrd r10,1
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl machine_check_exception
+ b ret_from_except
+
+#ifdef CONFIG_PPC_P7_NAP
+/*
+ * This is an idle wakeup. Low level machine check has already been
+ * done. Queue the event then call the idle code to do the wake up.
+ */
+EXC_COMMON_BEGIN(machine_check_idle_common)
+ bl machine_check_queue_event
+
+ /*
+ * We have not used any non-volatile GPRs here, and as a rule
+ * most exception code including machine check does not.
+ * Therefore PACA_NAPSTATELOST does not need to be set. Idle
+ * wakeup will restore volatile registers.
+ *
+ * Load the original SRR1 into r3 for pnv_powersave_wakeup_mce.
+ *
+ * Then decrement MCE nesting after finishing with the stack.
+ */
+ ld r3,_MSR(r1)
+ ld r4,_LINK(r1)
+
+ lhz r11,PACA_IN_MCE(r13)
+ subi r11,r11,1
+ sth r11,PACA_IN_MCE(r13)
+
+ mtlr r4
+ rlwinm r10,r3,47-31,30,31
+ cmpwi cr1,r10,2
+ bltlr cr1 /* no state loss, return to idle caller */
+ b idle_return_gpr_loss
+#endif
+
EXC_COMMON_BEGIN(unrecoverable_mce)
/*
* We are going down. But there are chances that we might get hit by
--
2.22.0
next prev parent reply other threads:[~2019-08-02 11:35 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-02 10:56 [PATCH v2 00/44] powerpc/64s/exception: cleanup and macrofiy, Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 01/44] powerpc/64s/exception: machine check fwnmi remove HV case Nicholas Piggin
2019-09-02 3:29 ` Michael Ellerman
2019-08-02 10:56 ` [PATCH v2 02/44] powerpc/64s/exception: machine check remove bitrotted comment Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 03/44] powerpc/64s/exception: machine check fix KVM guest test Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 04/44] powerpc/64s/exception: machine check adjust RFI target Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 05/44] powerpc/64s/exception: machine check pseries should always run the early handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 06/44] powerpc/64s/exception: machine check remove machine_check_pSeries_0 branch Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 07/44] powerpc/64s/exception: machine check use correct cfar for late handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 08/44] powerpc/64s/powernv: machine check dump SLB contents Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 09/44] powerpc/64s/pseries: machine check convert to use common event code Nicholas Piggin
2019-08-08 5:01 ` kbuild test robot
2019-08-16 22:25 ` Michael Ellerman
2019-08-19 13:09 ` Nicholas Piggin
2019-08-08 5:50 ` kbuild test robot
2019-08-02 10:56 ` [PATCH v2 10/44] powerpc/64s/exception: machine check pseries should skip the late handler for kernel MCEs Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 11/44] powerpc/64s/exception: machine check restructure to reuse common macros Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 12/44] powerpc/64s/exception: machine check move tramp code Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 13/44] powerpc/64s/exception: simplify machine check early path Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 14/44] powerpc/64s/exception: machine check move unrecoverable handling out of line Nicholas Piggin
2019-08-02 10:56 ` Nicholas Piggin [this message]
2019-08-02 10:56 ` [PATCH v2 16/44] powerpc/64s/exception: machine check improve labels and comments Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 17/44] powerpc/64s/exception: Fix DAR load for handle_page_fault error case Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 18/44] powerpc/64s/exception: move head-64.h exception code to exception-64s.S Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 19/44] powerpc/64s/exception: Add EXC_HV_OR_STD, which selects HSRR if HVMODE Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 20/44] powerpc/64s/exception: Fix performance monitor virt handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 21/44] powerpc/64s/exception: remove 0xb00 handler Nicholas Piggin
2019-08-21 12:18 ` Michael Ellerman
2019-08-02 10:56 ` [PATCH v2 22/44] powerpc/64s/exception: Replace PROLOG macros and EXC helpers with a gas macro Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 23/44] powerpc/64s/exception: remove EXCEPTION_PROLOG_0/1, rename _2 Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 24/44] powerpc/64s/exception: Add the virt variant of the denorm interrupt handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 25/44] powerpc/64s/exception: INT_HANDLER support HDAR/HDSISR and use it in HDSI Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 26/44] powerpc/64s/exception: Add INT_KVM_HANDLER gas macro Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 27/44] powerpc/64s/exception: KVM_HANDLER reorder arguments to match other macros Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 28/44] powerpc/64s/exception: Merge EXCEPTION_PROLOG_COMMON_2/3 Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 29/44] powerpc/64s/exception: Add INT_COMMON gas macro to generate common exception code Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 30/44] powerpc/64s/exception: Expand EXCEPTION_COMMON macro into caller Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 31/44] powerpc/64s/exception: Expand EXCEPTION_PROLOG_COMMON_1 and 2 " Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 32/44] powerpc/64s/exception: INT_COMMON add DAR, DSISR, reconcile options Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 33/44] powerpc/64s/exception: move interrupt entry code above the common handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 34/44] powerpc/64s/exception: program check handler do not branch into a macro Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 35/44] powerpc/64s/exception: Remove pointless KVM handler name bifurcation Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 36/44] powerpc/64s/exception: reduce page fault unnecessary loads Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 37/44] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 38/44] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 39/44] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 40/44] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 41/44] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 42/44] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 43/44] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 44/44] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190802105709.27696-16-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.