From: Pavel Machek <pavel@ucw.cz>
To: kernel list <linux-kernel@vger.kernel.org>,
paolo.valente@linaro.org, axboe@kernel.dk,
linux-block@vger.kernel.org, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org
Subject: slab corruption in 5.3-rc3 while inserting an usb key
Date: Wed, 7 Aug 2019 12:10:32 +0200 [thread overview]
Message-ID: <20190807101031.GA18652@amd> (raw)
[-- Attachment #1: Type: text/plain, Size: 4377 bytes --]
Hi!
Machine is thinkpad x220. BFQ related?
[ 8224.904413] usb 2-1.1.4: Product: Intenso Twister Line
[ 8224.904421] usb 2-1.1.4: Manufacturer: Alcor Tech
[ 8224.904428] usb 2-1.1.4: SerialNumber: 12102500210755
[ 8224.905778] usb-storage 2-1.1.4:1.0: USB Mass Storage device
detected
[ 8224.906519] scsi host6: usb-storage 2-1.1.4:1.0
[ 8225.938476] scsi 6:0:0:0: Direct-Access Intenso Twister Line
8.07 PQ: 0 ANSI: 4
[ 8225.941857] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 8225.944342] sd 6:0:0:0: [sdc] 15257600 512-byte logical blocks:
(7.81 GB/7.28 GiB)
[ 8225.945541] sd 6:0:0:0: [sdc] Write Protect is off
[ 8225.945551] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 8225.946669] sd 6:0:0:0: [sdc] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 8225.961509] sdc: sdc1
[ 8225.966286] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 8226.351785] FAT-fs (sdc1): Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.
[ 8685.026976] perf: interrupt took too long (3142 > 3141), lowering
kernel.perf_event_max_sample_rate to 63500
[ 8710.270064] Slab corruption (Not tainted): bfq_queue
start=ffff8880befb0cd8, len=512
[ 8710.270073] Redzone: 0x9f911029d74e35b/0x9f911029d74e35b
[ 8710.270081] Last user: (bfq_put_queue+0xb0/0xe0)
[ 8710.270085] 1f0: 18 e5 44 93 81 88 ff ff 6b 6b 6b 6b 6b 6b 6b a5
..D.....kkkkkkk.
[ 8710.270092] Prev obj: start=ffff8880befb0ac0, len=512
[ 8710.270097] Redzone: 0xd84156c5635688c0/0xd84156c5635688c0
[ 8710.270102] Last user: (bfq_get_queue+0x13a/0x290)
[ 8710.270105] 000: 02 00 00 00 00 00 00 00 00 38 a6 95 81 88 ff ff
.........8......
[ 8710.270110] 010: 07 00 03 00 07 00 03 00 00 00 00 00 00 00 00 00
................
[ 8711.077572] Slab corruption (Not tainted): bfq_queue
start=ffff8880c20b7710, len=512
[ 8711.077577] Redzone: 0x9f911029d74e35b/0x9f911029d74e35b
[ 8711.077584] Last user: (bfq_put_queue+0xb0/0xe0)
[ 8711.077586] 1f0: 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 00 00 00 00
kkkkkkkk........
[ 8711.077591] Prev obj: start=ffff8880c20b74f8, len=512
[ 8711.077593] Redzone: 0x9f911029d74e35b/0x9f911029d74e35b
[ 8711.077596] Last user: (bfq_put_queue+0xb0/0xe0)
[ 8711.077598] 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
[ 8711.077601] 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
[ 8711.077604] Next obj: start=ffff8880c20b7928, len=512
[ 8711.077606] Redzone: 0x9f911029d74e35b/0x9f911029d74e35b
[ 8711.077609] Last user: (bfq_put_queue+0xb0/0xe0)
[ 8711.077611] 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
[ 8711.077614] 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
[ 8764.014525] Slab corruption (Not tainted): bfq_queue
start=ffff888049b0c108, len=512
[ 8764.014534] Redzone: 0x9f911029d74e35b/0x9f911029d74e35b
[ 8764.014542] Last user: (bfq_put_queue+0xb0/0xe0)
[ 8764.014546] 1f0: 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 00 00 00 00
kkkkkkkk........
[ 8764.014553] Next obj: start=ffff888049b0c320, len=512
[ 8764.014558] Redzone: 0xd84156c5635688c0/0xd84156c5635688c0
[ 8764.014562] Last user: (bfq_get_queue+0x13a/0x290)
[ 8764.014566] 000: 01 00 00 00 00 00 00 00 00 50 df 96 81 88 ff ff
.........P......
[ 8764.014571] 010: 04 00 02 00 04 00 02 00 00 00 00 00 00 00 00 00
................
[10593.478355] perf: interrupt took too long (3936 > 3927), lowering
kernel.perf_event_max_sample_rate to 50750
[10745.055650] Slab corruption (Not tainted): bfq_queue
start=ffff88818f6a9088, len=512
[10745.055660] Redzone: 0x9f911029d74e35b/0x9f911029d74e35b
[10745.055670] Last user: (bfq_put_queue+0xb0/0xe0)
[10745.055675] 1f0: a0 f6 71 d4 80 88 ff ff 6b 6b 6b 6b 6b 6b 6b a5
..q.....kkkkkkk.
[10745.055683] Next obj: start=ffff88818f6a92a0, len=512
[10745.055688] Redzone: 0xd84156c5635688c0/0xd84156c5635688c0
[10745.055693] Last user: (bfq_get_queue+0x13a/0x290)
[10745.055698] 000: 01 00 00 00 00 00 00 00 00 38 a6 95 81 88 ff ff
.........8......
[10745.055704] 010: 04 00 02 00 04 00 02 00 00 00 00 00 00 00 00 00
................
[12141.101100] usb 2-1.1.4: USB disconnect, device number 8
pavel@duo:/data/l/linux-olpc$
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next reply other threads:[~2019-08-07 10:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-07 10:10 Pavel Machek [this message]
2019-08-07 10:13 ` slab corruption in 5.3-rc3 while inserting an usb key Paolo Valente
2019-08-07 12:33 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190807101031.GA18652@amd \
--to=pavel@ucw.cz \
--cc=axboe@kernel.dk \
--cc=gregkh@linuxfoundation.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=paolo.valente@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.