Re: [PATCH v1] Export Runtime Configuration Interface table to sysfs

[<Narendra.K@dell.com>]

On Thu, Jul 11, 2019 at 11:00:37PM +0000, Limonciello, Mario wrote:
> > -----Original Message-----
> > From: K, Narendra
> > Sent: Wednesday, July 10, 2019 11:59 AM
> > To: linux-efi@vger.kernel.org; ard.biesheuvel@linaro.org; pjones@redhat.com
> > Cc: K, Narendra; Hayes, Stuart; Limonciello, Mario
> > Subject: [PATCH v1] Export Runtime Configuration Interface table to sysfs
> > 
> > From: Narendra K <Narendra.K@dell.com>
> > 
> > System firmware advertises the address of the 'Runtime Configuration Interface
> > table version 2 (RCI2)' via an EFI Configuration Table entry. This code retrieves
> > the RCI2 table from the address and exports it to sysfs as a binary attribute 'rci2'
> > under /sys/firmware/efi/tables directory.
> > The approach adopted is similar to the attribute 'DMI' under
> > /sys/firmware/dmi/tables.
> > 
> > RCI2 table contains BIOS HII in XML format and is used to populate BIOS setup
> > page in Dell EMC OpenManage Server Administrator tool.
> > The BIOS setup page contains BIOS tokens which can be configured.
> > 
> > Signed-off-by: Narendra K <Narendra.K@dell.com>
> 
> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>

Hi Ard,

Does the version 1 of the patch look good ? Please share your thoughts.

> 
> > ---
> > Hi Ard, the review comment in the v0 version of the patch suggested that the
> > kconfig symbol be set to Y for X86. I made a change to the suggestion.
> > In the v1 version, I have set the symbol to N by default and added a note to the
> > help section to make it Y for Dell EMC PowerEdge systems. If it needs to be
> > changed, I will resubmit the patch after changing it to implement the suggestion.
> > 
> > The patch is created on 'next' branch of efi tree.
> > 
> > v0 -> v1:
> > - Introduced a new Kconfig symbol CONFIG_EFI_RCI2_TABLE and compile
> > RCI2 table support if it is set. Set the symbol to N by default.
> > - Removed calling 'efi_rci2_sysfs_init' from drivers/firmware/efi/efi.c and made
> > it a 'late_initcall' in drivers/firmware/efi/rci2_table.c.
> > Removed the function declaration from include/linux/efi.h.
> > 
> > RFC -> v0:
> > - Removed rci2 table from struct efi and defined it in rci2_table.c similar to the
> > way uv_systab_phys is defined in arch/x86/platform/uv/bios_uv.c
> > - Removed the oem_tables array and added rci2 to common_tables array
> > - Removed the string 'rci2' from the common_tables array so that it is not
> > printed in dmesg.
> > - Merged function 'efi_rci2_table_init' into 'efi_rci2_sysfs_init' function to avoid
> > calling early_memremap/unmap functions.

-- 
With regards,
Narendra K