From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adam Ford Date: Wed, 7 Aug 2019 11:35:52 -0500 Subject: [U-Boot] [PATCH 2/2] ARM: imx6q_logic: Enable DM_SERIAL In-Reply-To: <20190807163552.25400-1-aford173@gmail.com> References: <20190807163552.25400-1-aford173@gmail.com> Message-ID: <20190807163552.25400-2-aford173@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de With spl_early_init() now enabled in board_init_f, the preloader_console_init() function can correctly initialize the serial port based on the device tree during SPL. This patch enables DM_SERIAL in both U-Boot and SPL. Signed-off-by: Adam Ford diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index b95c9783a4..2c77b9c218 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_MX6LOGICPD=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y @@ -84,6 +83,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_USB=y CONFIG_DM_USB=y -- 2.17.1