From: Bhaskar Chowdhury <unixbhaskar@gmail.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org,
lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 5.2.8
Date: Sat, 10 Aug 2019 02:48:15 +0530 [thread overview]
Message-ID: <20190809211812.GA8440@Gentoo> (raw)
In-Reply-To: <20190809173328.GA18975@kroah.com>
[-- Attachment #1: Type: text/plain, Size: 10984 bytes --]
Thanks, a bunch Greg! :)
On 19:33 Fri 09 Aug 2019, Greg KH wrote:
>I'm announcing the release of the 5.2.8 kernel.
>
>All users of the 5.2 kernel series must upgrade.
>
>The updated 5.2.y git tree can be found at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.2.y
>and can be browsed at the normal kernel.org git web browser:
> https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
>
>thanks,
>
>greg k-h
>
>------------
>
> Makefile | 2
> drivers/atm/iphase.c | 8 +
> drivers/gpu/drm/i915/intel_bios.c | 2
> drivers/gpu/drm/i915/intel_vbt_defs.h | 6 -
> drivers/hid/hid-ids.h | 1
> drivers/hid/hid-quirks.c | 1
> drivers/hid/wacom_wac.c | 12 +-
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3
> drivers/net/ethernet/marvell/mvmdio.c | 28 ++++-
> drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 46 ++------
> drivers/net/ethernet/mellanox/mlx5/core/dev.c | 2
> drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 27 +++--
> drivers/net/ethernet/mellanox/mlx5/core/en/port.h | 6 -
> drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 67 ++++++++----
> drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5
> drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4
> drivers/net/ethernet/mellanox/mlx5/core/fs_core.h | 5
> drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c | 5
> drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 2
> drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c | 4
> drivers/net/ethernet/mscc/ocelot.c | 1
> drivers/net/ethernet/qualcomm/rmnet/rmnet_map.h | 2
> drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c | 13 +-
> drivers/net/ethernet/realtek/r8169.c | 9 +
> drivers/net/ethernet/rocker/rocker_main.c | 1
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5
> drivers/net/phy/fixed_phy.c | 6 -
> drivers/net/phy/mscc.c | 16 +--
> drivers/net/phy/phy_device.c | 6 +
> drivers/net/phy/phylink.c | 10 +
> drivers/net/ppp/pppoe.c | 3
> drivers/net/ppp/pppox.c | 13 ++
> drivers/net/ppp/pptp.c | 3
> drivers/net/tun.c | 9 +
> drivers/nfc/nfcmrvl/main.c | 4
> drivers/nfc/nfcmrvl/uart.c | 4
> drivers/nfc/nfcmrvl/usb.c | 1
> drivers/nvdimm/bus.c | 73 ++++++++------
> drivers/nvdimm/region_devs.c | 4
> drivers/scsi/fcoe/fcoe_ctlr.c | 51 +++------
> drivers/scsi/libfc/fc_rport.c | 5
> drivers/spi/spi-bcm2835.c | 3
> fs/compat_ioctl.c | 3
> include/linux/if_pppox.h | 3
> include/linux/mlx5/fs.h | 1
> include/linux/mlx5/mlx5_ifc.h | 6 -
> include/scsi/libfcoe.h | 1
> net/bridge/br.c | 5
> net/bridge/br_multicast.c | 3
> net/bridge/br_private.h | 9 -
> net/bridge/br_vlan.c | 29 +++--
> net/core/dev.c | 17 ++-
> net/ipv4/ipip.c | 3
> net/ipv6/ip6_gre.c | 3
> net/ipv6/ip6_tunnel.c | 6 -
> net/l2tp/l2tp_ppp.c | 3
> net/mac80211/iface.c | 1
> net/sched/act_bpf.c | 9 -
> net/sched/act_connmark.c | 9 -
> net/sched/act_csum.c | 9 -
> net/sched/act_gact.c | 8 -
> net/sched/act_ife.c | 13 +-
> net/sched/act_mirred.c | 13 +-
> net/sched/act_nat.c | 9 -
> net/sched/act_pedit.c | 10 +
> net/sched/act_police.c | 8 -
> net/sched/act_sample.c | 10 -
> net/sched/act_simple.c | 10 +
> net/sched/act_skbedit.c | 11 +-
> net/sched/act_skbmod.c | 11 +-
> net/sched/act_tunnel_key.c | 8 -
> net/sched/act_vlan.c | 25 +++-
> net/sched/sch_codel.c | 6 -
> net/smc/af_smc.c | 15 +-
> net/tipc/netlink_compat.c | 11 +-
> net/tipc/socket.c | 3
> net/vmw_vsock/hyperv_transport.c | 8 +
> sound/usb/helper.c | 17 +++
> sound/usb/helper.h | 1
> sound/usb/quirks.c | 18 ++-
> tools/testing/selftests/bpf/Makefile | 3
> tools/testing/selftests/bpf/test_xdp_vlan.sh | 57 ++++++++--
> tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh | 9 +
> tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh | 9 +
> 84 files changed, 578 insertions(+), 313 deletions(-)
>
>Aaron Armstrong Skomra (1):
> HID: wacom: fix bit shift for Cintiq Companion 2
>
>Alexis Bauvin (1):
> tun: mark small packets as owned by the tap sock
>
>Andreas Schwab (1):
> net: phy: mscc: initialize stats array
>
>Ariel Levkovich (1):
> net/mlx5e: Prevent encap flow counter update async to user query
>
>Arnaud Patard (1):
> drivers/net/ethernet/marvell/mvmdio.c: Fix non OF case
>
>Arnd Bergmann (1):
> compat_ioctl: pppoe: fix PPPOEIOCSFWD handling
>
>Arseny Solokha (1):
> net: phylink: don't start and stop SGMII PHYs in SFP modules twice
>
>Aya Levin (1):
> net/mlx5e: Fix matching of speed to PRM link modes
>
>Claudiu Manoil (1):
> ocelot: Cancel delayed work before wq destruction
>
>Colin Ian King (1):
> rocker: fix memory leaks of fib_work on two error return paths
>
>Cong Wang (1):
> ife: error out when nla attributes are empty
>
>Dan Williams (2):
> libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
> libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
>
>Dexuan Cui (1):
> hv_sock: Fix hang when a connection is closed
>
>Dhinakaran Pandiyan (1):
> drm/i915/vbt: Fix VBT parsing for the PSR section
>
>Dmytro Linkin (1):
> net: sched: use temporary variable for actions indexes
>
>Edward Srouji (1):
> net/mlx5: Fix modify_cq_in alignment
>
>Frode Isaksen (1):
> net: stmmac: Use netif_tx_napi_add() for TX polling function
>
>Greg Kroah-Hartman (1):
> Linux 5.2.8
>
>Gustavo A. R. Silva (1):
> atm: iphase: Fix Spectre v1 vulnerability
>
>Haishuang Yan (3):
> ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6
> ip6_tunnel: fix possible use-after-free on xmit
> ipip: validate header length in ipip_tunnel_xmit
>
>Hannes Reinecke (1):
> scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
>
>Heiner Kallweit (2):
> r8169: don't use MSI before RTL8168d
> net: phy: fix race in genphy_update_link
>
>Hillf Danton (1):
> ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check
>
>Hubert Feurstein (1):
> net: phy: fixed_phy: print gpio error only if gpio node is present
>
>Jesper Dangaard Brouer (4):
> bpf: fix XDP vlan selftests test_xdp_vlan.sh
> selftests/bpf: add wrapper scripts for test_xdp_vlan.sh
> selftests/bpf: reduce time to execute test_xdp_vlan.sh
> net: fix bpf_xdp_adjust_head regression for generic-XDP
>
>Jia-Ju Bai (1):
> net: sched: Fix a possible null-pointer dereference in dequeue_func()
>
>Jiri Pirko (2):
> mlxsw: spectrum: Fix error path in mlxsw_sp_module_init()
> net: fix ifindex collision during namespace removal
>
>Johan Hovold (1):
> NFC: nfcmrvl: fix gpio-handling regression
>
>Johannes Berg (1):
> Revert "mac80211: set NETIF_F_LLTX when using intermediate tx queues"
>
>Jon Maloy (1):
> tipc: fix unitilized skb list crash
>
>Lukas Wunner (1):
> spi: bcm2835: Fix 3-wire mode if DMA is enabled
>
>Maor Gottlieb (1):
> net/mlx5: Add missing RDMA_RX capabilities
>
>Mark Zhang (1):
> net/mlx5: Use reversed order when unregister devices
>
>Matteo Croce (2):
> mvpp2: fix panic on module removal
> mvpp2: refactor MTU change code
>
>Nikolay Aleksandrov (3):
> net: bridge: delete local fdb on device init failure
> net: bridge: mcast: don't delete permanent entries when fast leave is enabled
> net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
>
>Petr Machata (1):
> mlxsw: spectrum_buffers: Further reduce pool size on Spectrum-2
>
>Qian Cai (1):
> net/mlx5e: always initialize frag->last_in_page
>
>René van Dorst (1):
> net: phylink: Fix flow control for fixed-link
>
>Roman Mashak (1):
> net sched: update vlan action for batched events operations
>
>Sebastian Parschauer (1):
> HID: Add quirk for HP X1200 PIXART OEM mouse
>
>Subash Abhinov Kasiviswanathan (1):
> net: qualcomm: rmnet: Fix incorrect UL checksum offload logic
>
>Sudarsana Reddy Kalluru (1):
> bnx2x: Disable multi-cos feature.
>
>Takashi Iwai (1):
> ALSA: usb-audio: Sanity checks for each pipe and EP types
>
>Taras Kondratiuk (1):
> tipc: compat: allow tipc commands without arguments
>
>Ursula Braun (2):
> net/smc: do not schedule tx_work in SMC_CLOSED state
> net/smc: avoid fallback in case of non-blocking connect
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
prev parent reply other threads:[~2019-08-09 21:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-09 17:33 Linux 5.2.8 Greg KH
2019-08-09 17:33 ` Greg KH
2019-08-09 21:18 ` Bhaskar Chowdhury [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190809211812.GA8440@Gentoo \
--to=unixbhaskar@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.