From: Stephen Boyd <sboyd@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Jun Nie <jun.nie@linaro.org>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH 2/4] clk: zx296718: Don't reference clk_init_data after registration
Date: Thu, 15 Aug 2019 09:00:18 -0700 [thread overview]
Message-ID: <20190815160020.183334-3-sboyd@kernel.org> (raw)
In-Reply-To: <20190815160020.183334-1-sboyd@kernel.org>
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/clk/zte/clk-zx296718.c | 109 +++++++++++++++------------------
1 file changed, 49 insertions(+), 60 deletions(-)
diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index fd6c347bec6a..dd7045bc48c1 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -564,6 +564,7 @@ static int __init top_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
+ const char *name;
reg_base = of_iomap(np, 0);
if (!reg_base) {
@@ -573,11 +574,10 @@ static int __init top_clocks_init(struct device_node *np)
for (i = 0; i < ARRAY_SIZE(zx296718_pll_clk); i++) {
zx296718_pll_clk[i].reg_base += (uintptr_t)reg_base;
+ name = zx296718_pll_clk[i].hw.init->name;
ret = clk_hw_register(NULL, &zx296718_pll_clk[i].hw);
- if (ret) {
- pr_warn("top clk %s init error!\n",
- zx296718_pll_clk[i].hw.init->name);
- }
+ if (ret)
+ pr_warn("top clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(top_ffactor_clk); i++) {
@@ -585,11 +585,10 @@ static int __init top_clocks_init(struct device_node *np)
top_hw_onecell_data.hws[top_ffactor_clk[i].id] =
&top_ffactor_clk[i].factor.hw;
+ name = top_ffactor_clk[i].factor.hw.init->name;
ret = clk_hw_register(NULL, &top_ffactor_clk[i].factor.hw);
- if (ret) {
- pr_warn("top clk %s init error!\n",
- top_ffactor_clk[i].factor.hw.init->name);
- }
+ if (ret)
+ pr_warn("top clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(top_mux_clk); i++) {
@@ -598,11 +597,10 @@ static int __init top_clocks_init(struct device_node *np)
&top_mux_clk[i].mux.hw;
top_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+ name = top_mux_clk[i].mux.hw.init->name;
ret = clk_hw_register(NULL, &top_mux_clk[i].mux.hw);
- if (ret) {
- pr_warn("top clk %s init error!\n",
- top_mux_clk[i].mux.hw.init->name);
- }
+ if (ret)
+ pr_warn("top clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(top_gate_clk); i++) {
@@ -611,11 +609,10 @@ static int __init top_clocks_init(struct device_node *np)
&top_gate_clk[i].gate.hw;
top_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+ name = top_gate_clk[i].gate.hw.init->name;
ret = clk_hw_register(NULL, &top_gate_clk[i].gate.hw);
- if (ret) {
- pr_warn("top clk %s init error!\n",
- top_gate_clk[i].gate.hw.init->name);
- }
+ if (ret)
+ pr_warn("top clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(top_div_clk); i++) {
@@ -624,11 +621,10 @@ static int __init top_clocks_init(struct device_node *np)
&top_div_clk[i].div.hw;
top_div_clk[i].div.reg += (uintptr_t)reg_base;
+ name = top_div_clk[i].div.hw.init->name;
ret = clk_hw_register(NULL, &top_div_clk[i].div.hw);
- if (ret) {
- pr_warn("top clk %s init error!\n",
- top_div_clk[i].div.hw.init->name);
- }
+ if (ret)
+ pr_warn("top clk %s init error!\n", name);
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
@@ -754,6 +750,7 @@ static int __init lsp0_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
+ const char *name;
reg_base = of_iomap(np, 0);
if (!reg_base) {
@@ -767,11 +764,10 @@ static int __init lsp0_clocks_init(struct device_node *np)
&lsp0_mux_clk[i].mux.hw;
lsp0_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+ name = lsp0_mux_clk[i].mux.hw.init->name;
ret = clk_hw_register(NULL, &lsp0_mux_clk[i].mux.hw);
- if (ret) {
- pr_warn("lsp0 clk %s init error!\n",
- lsp0_mux_clk[i].mux.hw.init->name);
- }
+ if (ret)
+ pr_warn("lsp0 clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(lsp0_gate_clk); i++) {
@@ -780,11 +776,10 @@ static int __init lsp0_clocks_init(struct device_node *np)
&lsp0_gate_clk[i].gate.hw;
lsp0_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+ name = lsp0_gate_clk[i].gate.hw.init->name;
ret = clk_hw_register(NULL, &lsp0_gate_clk[i].gate.hw);
- if (ret) {
- pr_warn("lsp0 clk %s init error!\n",
- lsp0_gate_clk[i].gate.hw.init->name);
- }
+ if (ret)
+ pr_warn("lsp0 clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(lsp0_div_clk); i++) {
@@ -793,11 +788,10 @@ static int __init lsp0_clocks_init(struct device_node *np)
&lsp0_div_clk[i].div.hw;
lsp0_div_clk[i].div.reg += (uintptr_t)reg_base;
+ name = lsp0_div_clk[i].div.hw.init->name;
ret = clk_hw_register(NULL, &lsp0_div_clk[i].div.hw);
- if (ret) {
- pr_warn("lsp0 clk %s init error!\n",
- lsp0_div_clk[i].div.hw.init->name);
- }
+ if (ret)
+ pr_warn("lsp0 clk %s init error!\n", name);
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
@@ -862,6 +856,7 @@ static int __init lsp1_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
+ const char *name;
reg_base = of_iomap(np, 0);
if (!reg_base) {
@@ -875,11 +870,10 @@ static int __init lsp1_clocks_init(struct device_node *np)
&lsp0_mux_clk[i].mux.hw;
lsp1_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+ name = lsp1_mux_clk[i].mux.hw.init->name;
ret = clk_hw_register(NULL, &lsp1_mux_clk[i].mux.hw);
- if (ret) {
- pr_warn("lsp1 clk %s init error!\n",
- lsp1_mux_clk[i].mux.hw.init->name);
- }
+ if (ret)
+ pr_warn("lsp1 clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(lsp1_gate_clk); i++) {
@@ -888,11 +882,10 @@ static int __init lsp1_clocks_init(struct device_node *np)
&lsp1_gate_clk[i].gate.hw;
lsp1_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+ name = lsp1_gate_clk[i].gate.hw.init->name;
ret = clk_hw_register(NULL, &lsp1_gate_clk[i].gate.hw);
- if (ret) {
- pr_warn("lsp1 clk %s init error!\n",
- lsp1_gate_clk[i].gate.hw.init->name);
- }
+ if (ret)
+ pr_warn("lsp1 clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(lsp1_div_clk); i++) {
@@ -901,11 +894,10 @@ static int __init lsp1_clocks_init(struct device_node *np)
&lsp1_div_clk[i].div.hw;
lsp1_div_clk[i].div.reg += (uintptr_t)reg_base;
+ name = lsp1_div_clk[i].div.hw.init->name;
ret = clk_hw_register(NULL, &lsp1_div_clk[i].div.hw);
- if (ret) {
- pr_warn("lsp1 clk %s init error!\n",
- lsp1_div_clk[i].div.hw.init->name);
- }
+ if (ret)
+ pr_warn("lsp1 clk %s init error!\n", name);
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
@@ -979,6 +971,7 @@ static int __init audio_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
+ const char *name;
reg_base = of_iomap(np, 0);
if (!reg_base) {
@@ -992,11 +985,10 @@ static int __init audio_clocks_init(struct device_node *np)
&audio_mux_clk[i].mux.hw;
audio_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+ name = audio_mux_clk[i].mux.hw.init->name;
ret = clk_hw_register(NULL, &audio_mux_clk[i].mux.hw);
- if (ret) {
- pr_warn("audio clk %s init error!\n",
- audio_mux_clk[i].mux.hw.init->name);
- }
+ if (ret)
+ pr_warn("audio clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(audio_adiv_clk); i++) {
@@ -1005,11 +997,10 @@ static int __init audio_clocks_init(struct device_node *np)
&audio_adiv_clk[i].hw;
audio_adiv_clk[i].reg_base += (uintptr_t)reg_base;
+ name = audio_adiv_clk[i].hw.init->name;
ret = clk_hw_register(NULL, &audio_adiv_clk[i].hw);
- if (ret) {
- pr_warn("audio clk %s init error!\n",
- audio_adiv_clk[i].hw.init->name);
- }
+ if (ret)
+ pr_warn("audio clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(audio_div_clk); i++) {
@@ -1018,11 +1009,10 @@ static int __init audio_clocks_init(struct device_node *np)
&audio_div_clk[i].div.hw;
audio_div_clk[i].div.reg += (uintptr_t)reg_base;
+ name = audio_div_clk[i].div.hw.init->name;
ret = clk_hw_register(NULL, &audio_div_clk[i].div.hw);
- if (ret) {
- pr_warn("audio clk %s init error!\n",
- audio_div_clk[i].div.hw.init->name);
- }
+ if (ret)
+ pr_warn("audio clk %s init error!\n", name);
}
for (i = 0; i < ARRAY_SIZE(audio_gate_clk); i++) {
@@ -1031,11 +1021,10 @@ static int __init audio_clocks_init(struct device_node *np)
&audio_gate_clk[i].gate.hw;
audio_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+ name = audio_gate_clk[i].gate.hw.init->name;
ret = clk_hw_register(NULL, &audio_gate_clk[i].gate.hw);
- if (ret) {
- pr_warn("audio clk %s init error!\n",
- audio_gate_clk[i].gate.hw.init->name);
- }
+ if (ret)
+ pr_warn("audio clk %s init error!\n", name);
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
--
Sent by a computer through tubes
next prev parent reply other threads:[~2019-08-15 16:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-15 16:00 [PATCH 0/4] Followup to "Make clk_hw::init NULL after clk registration" Stephen Boyd
2019-08-15 16:00 ` [PATCH 1/4] clk: milbeaut: Don't reference clk_init_data after registration Stephen Boyd
2019-08-16 17:20 ` Stephen Boyd
2019-08-15 16:00 ` Stephen Boyd [this message]
2019-08-16 17:20 ` [PATCH 2/4] clk: zx296718: " Stephen Boyd
2019-08-15 16:00 ` [PATCH 3/4] rtc: sun6i: " Stephen Boyd
2019-08-15 16:11 ` Chen-Yu Tsai
2019-08-15 21:59 ` Stephen Boyd
2019-08-16 14:50 ` Alexandre Belloni
2019-08-16 17:20 ` Stephen Boyd
2019-08-15 16:00 ` [PATCH 4/4] clk: qcom: Remove error prints from DFS registration Stephen Boyd
2019-08-16 2:48 ` Taniya Das
2019-08-16 17:20 ` Stephen Boyd
2019-08-19 7:02 ` [PATCH 0/4] Followup to "Make clk_hw::init NULL after clk registration" Guillaume Tucker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190815160020.183334-3-sboyd@kernel.org \
--to=sboyd@kernel.org \
--cc=jun.nie@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.