[Qemu-devel] [PULL 5/8] hw/core: Add a config switch for the "or-irq" device

[Thomas Huth <thuth@redhat.com>]

The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190817101931.28386-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig        | 3 +++
 hw/core/Kconfig       | 3 +++
 hw/core/Makefile.objs | 2 +-
 hw/pci-host/Kconfig   | 3 ++-
 4 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index ab65ecd216..849195c3f6 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -292,6 +292,7 @@ config RASPI
 config STM32F205_SOC
     bool
     select ARM_V7M
+    select OR_IRQ
     select STM32F2XX_TIMER
     select STM32F2XX_USART
     select STM32F2XX_SYSCFG
@@ -360,6 +361,7 @@ config MPS2
     select LAN9118
     select MPS2_FPGAIO
     select MPS2_SCC
+    select OR_IRQ
     select PL022    # Serial port
     select PL080    # DMA controller
 
@@ -439,6 +441,7 @@ config ARMSSE
     select IOTKIT_SECCTL
     select IOTKIT_SYSCTL
     select IOTKIT_SYSINFO
+    select OR_IRQ
     select TZ_MPC
     select TZ_MSC
     select TZ_PPC
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index d11920fcb3..984143456a 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -7,6 +7,9 @@ config PTIMER
 config FITLOADER
     bool
 
+config OR_IRQ
+    bool
+
 config PLATFORM_BUS
     bool
 
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index d6cfb2a81b..ce337bd7c9 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -18,7 +18,7 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o
 common-obj-$(CONFIG_FITLOADER) += loader-fit.o
 common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
 common-obj-$(CONFIG_REGISTER) += register.o
-common-obj-$(CONFIG_SOFTMMU) += or-irq.o
+common-obj-$(CONFIG_OR_IRQ) += or-irq.o
 common-obj-$(CONFIG_SOFTMMU) += split-irq.o
 common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
 common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 8c16d96b3f..1edc1a31d4 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -2,8 +2,9 @@ config PAM
     bool
 
 config PREP_PCI
-    select PCI
     bool
+    select PCI
+    select OR_IRQ
 
 config GRACKLE_PCI
     select PCI
-- 
2.18.1