All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: axboe@kernel.dk, jack@suse.cz, hannes@cmpxchg.org,
	mhocko@kernel.org, vdavydov.dev@gmail.com
Cc: cgroups@vger.kernel.org, linux-mm@kvack.org,
	linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel-team@fb.com, guro@fb.com, akpm@linux-foundation.org
Subject: [PATCH v3 5/5] writeback, memcg: Implement foreign dirty flushing
Date: Wed, 21 Aug 2019 14:02:35 -0700	[thread overview]
Message-ID: <20190821210235.GN2263813@devbig004.ftw2.facebook.com> (raw)
In-Reply-To: <20190815195930.GF2263813@devbig004.ftw2.facebook.com>

There's an inherent mismatch between memcg and writeback.  The former
trackes ownership per-page while the latter per-inode.  This was a
deliberate design decision because honoring per-page ownership in the
writeback path is complicated, may lead to higher CPU and IO overheads
and deemed unnecessary given that write-sharing an inode across
different cgroups isn't a common use-case.

Combined with inode majority-writer ownership switching, this works
well enough in most cases but there are some pathological cases.  For
example, let's say there are two cgroups A and B which keep writing to
different but confined parts of the same inode.  B owns the inode and
A's memory is limited far below B's.  A's dirty ratio can rise enough
to trigger balance_dirty_pages() sleeps but B's can be low enough to
avoid triggering background writeback.  A will be slowed down without
a way to make writeback of the dirty pages happen.

This patch implements foreign dirty recording and foreign mechanism so
that when a memcg encounters a condition as above it can trigger
flushes on bdi_writebacks which can clean its pages.  Please see the
comment on top of mem_cgroup_track_foreign_dirty_slowpath() for
details.

A reproducer follows.

write-range.c::

  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <fcntl.h>
  #include <sys/types.h>

  static const char *usage = "write-range FILE START SIZE\n";

  int main(int argc, char **argv)
  {
	  int fd;
	  unsigned long start, size, end, pos;
	  char *endp;
	  char buf[4096];

	  if (argc < 4) {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  fd = open(argv[1], O_WRONLY);
	  if (fd < 0) {
		  perror("open");
		  return 1;
	  }

	  start = strtoul(argv[2], &endp, 0);
	  if (*endp != '\0') {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  size = strtoul(argv[3], &endp, 0);
	  if (*endp != '\0') {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  end = start + size;

	  while (1) {
		  for (pos = start; pos < end; ) {
			  long bread, bwritten = 0;

			  if (lseek(fd, pos, SEEK_SET) < 0) {
				  perror("lseek");
				  return 1;
			  }

			  bread = read(0, buf, sizeof(buf) < end - pos ?
					       sizeof(buf) : end - pos);
			  if (bread < 0) {
				  perror("read");
				  return 1;
			  }
			  if (bread == 0)
				  return 0;

			  while (bwritten < bread) {
				  long this;

				  this = write(fd, buf + bwritten,
					       bread - bwritten);
				  if (this < 0) {
					  perror("write");
					  return 1;
				  }

				  bwritten += this;
				  pos += bwritten;
			  }
		  }
	  }
  }

repro.sh::

  #!/bin/bash

  set -e
  set -x

  sysctl -w vm.dirty_expire_centisecs=300000
  sysctl -w vm.dirty_writeback_centisecs=300000
  sysctl -w vm.dirtytime_expire_seconds=300000
  echo 3 > /proc/sys/vm/drop_caches

  TEST=/sys/fs/cgroup/test
  A=$TEST/A
  B=$TEST/B

  mkdir -p $A $B
  echo "+memory +io" > $TEST/cgroup.subtree_control
  echo $((1<<30)) > $A/memory.high
  echo $((32<<30)) > $B/memory.high

  rm -f testfile
  touch testfile
  fallocate -l 4G testfile

  echo "Starting B"

  (echo $BASHPID > $B/cgroup.procs
   pv -q --rate-limit 70M < /dev/urandom | ./write-range testfile $((2<<30)) $((2<<30))) &

  echo "Waiting 10s to ensure B claims the testfile inode"
  sleep 5
  sync
  sleep 5
  sync
  echo "Starting A"

  (echo $BASHPID > $A/cgroup.procs
   pv < /dev/urandom | ./write-range testfile 0 $((2<<30)))

v2: Added comments explaining why the specific intervals are being used.

v3: Use 0 @nr when calling cgroup_writeback_by_id() to use best-effort
    flushing while avoding possible livelocks.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 include/linux/backing-dev-defs.h |    1 
 include/linux/memcontrol.h       |   39 +++++++++++
 mm/memcontrol.c                  |  132 +++++++++++++++++++++++++++++++++++++++
 mm/page-writeback.c              |    4 +
 4 files changed, 176 insertions(+)

--- a/include/linux/backing-dev-defs.h
+++ b/include/linux/backing-dev-defs.h
@@ -63,6 +63,7 @@ enum wb_reason {
 	 * so it has a mismatch name.
 	 */
 	WB_REASON_FORKER_THREAD,
+	WB_REASON_FOREIGN_FLUSH,
 
 	WB_REASON_MAX,
 };
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -184,6 +184,23 @@ struct memcg_padding {
 #endif
 
 /*
+ * Remember four most recent foreign writebacks with dirty pages in this
+ * cgroup.  Inode sharing is expected to be uncommon and, even if we miss
+ * one in a given round, we're likely to catch it later if it keeps
+ * foreign-dirtying, so a fairly low count should be enough.
+ *
+ * See mem_cgroup_track_foreign_dirty_slowpath() for details.
+ */
+#define MEMCG_CGWB_FRN_CNT	4
+
+struct memcg_cgwb_frn {
+	u64 bdi_id;			/* bdi->id of the foreign inode */
+	int memcg_id;			/* memcg->css.id of foreign inode */
+	u64 at;				/* jiffies_64 at the time of dirtying */
+	struct wb_completion done;	/* tracks in-flight foreign writebacks */
+};
+
+/*
  * The memory controller data structure. The memory controller controls both
  * page cache and RSS per cgroup. We would eventually like to provide
  * statistics based on the statistics developed by Rik Van Riel for clock-pro,
@@ -307,6 +324,7 @@ struct mem_cgroup {
 #ifdef CONFIG_CGROUP_WRITEBACK
 	struct list_head cgwb_list;
 	struct wb_domain cgwb_domain;
+	struct memcg_cgwb_frn cgwb_frn[MEMCG_CGWB_FRN_CNT];
 #endif
 
 	/* List of events which userspace want to receive */
@@ -1237,6 +1255,18 @@ void mem_cgroup_wb_stats(struct bdi_writ
 			 unsigned long *pheadroom, unsigned long *pdirty,
 			 unsigned long *pwriteback);
 
+void mem_cgroup_track_foreign_dirty_slowpath(struct page *page,
+					     struct bdi_writeback *wb);
+
+static inline void mem_cgroup_track_foreign_dirty(struct page *page,
+						  struct bdi_writeback *wb)
+{
+	if (unlikely(&page->mem_cgroup->css != wb->memcg_css))
+		mem_cgroup_track_foreign_dirty_slowpath(page, wb);
+}
+
+void mem_cgroup_flush_foreign(struct bdi_writeback *wb);
+
 #else	/* CONFIG_CGROUP_WRITEBACK */
 
 static inline struct wb_domain *mem_cgroup_wb_domain(struct bdi_writeback *wb)
@@ -1252,6 +1282,15 @@ static inline void mem_cgroup_wb_stats(s
 {
 }
 
+static inline void mem_cgroup_track_foreign_dirty(struct page *page,
+						  struct bdi_writeback *wb)
+{
+}
+
+static inline void mem_cgroup_flush_foreign(struct bdi_writeback *wb)
+{
+}
+
 #endif	/* CONFIG_CGROUP_WRITEBACK */
 
 struct sock;
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -87,6 +87,10 @@ int do_swap_account __read_mostly;
 #define do_swap_account		0
 #endif
 
+#ifdef CONFIG_CGROUP_WRITEBACK
+static DECLARE_WAIT_QUEUE_HEAD(memcg_cgwb_frn_waitq);
+#endif
+
 /* Whether legacy memory+swap accounting is active */
 static bool do_memsw_account(void)
 {
@@ -4184,6 +4188,125 @@ void mem_cgroup_wb_stats(struct bdi_writ
 	}
 }
 
+/*
+ * Foreign dirty flushing
+ *
+ * There's an inherent mismatch between memcg and writeback.  The former
+ * trackes ownership per-page while the latter per-inode.  This was a
+ * deliberate design decision because honoring per-page ownership in the
+ * writeback path is complicated, may lead to higher CPU and IO overheads
+ * and deemed unnecessary given that write-sharing an inode across
+ * different cgroups isn't a common use-case.
+ *
+ * Combined with inode majority-writer ownership switching, this works well
+ * enough in most cases but there are some pathological cases.  For
+ * example, let's say there are two cgroups A and B which keep writing to
+ * different but confined parts of the same inode.  B owns the inode and
+ * A's memory is limited far below B's.  A's dirty ratio can rise enough to
+ * trigger balance_dirty_pages() sleeps but B's can be low enough to avoid
+ * triggering background writeback.  A will be slowed down without a way to
+ * make writeback of the dirty pages happen.
+ *
+ * Conditions like the above can lead to a cgroup getting repatedly and
+ * severely throttled after making some progress after each
+ * dirty_expire_interval while the underyling IO device is almost
+ * completely idle.
+ *
+ * Solving this problem completely requires matching the ownership tracking
+ * granularities between memcg and writeback in either direction.  However,
+ * the more egregious behaviors can be avoided by simply remembering the
+ * most recent foreign dirtying events and initiating remote flushes on
+ * them when local writeback isn't enough to keep the memory clean enough.
+ *
+ * The following two functions implement such mechanism.  When a foreign
+ * page - a page whose memcg and writeback ownerships don't match - is
+ * dirtied, mem_cgroup_track_foreign_dirty() records the inode owning
+ * bdi_writeback on the page owning memcg.  When balance_dirty_pages()
+ * decides that the memcg needs to sleep due to high dirty ratio, it calls
+ * mem_cgroup_flush_foreign() which queues writeback on the recorded
+ * foreign bdi_writebacks which haven't expired.  Both the numbers of
+ * recorded bdi_writebacks and concurrent in-flight foreign writebacks are
+ * limited to MEMCG_CGWB_FRN_CNT.
+ *
+ * The mechanism only remembers IDs and doesn't hold any object references.
+ * As being wrong occasionally doesn't matter, updates and accesses to the
+ * records are lockless and racy.
+ */
+void mem_cgroup_track_foreign_dirty_slowpath(struct page *page,
+					     struct bdi_writeback *wb)
+{
+	struct mem_cgroup *memcg = page->mem_cgroup;
+	struct memcg_cgwb_frn *frn;
+	u64 now = jiffies_64;
+	u64 oldest_at = now;
+	int oldest = -1;
+	int i;
+
+	/*
+	 * Pick the slot to use.  If there is already a slot for @wb, keep
+	 * using it.  If not replace the oldest one which isn't being
+	 * written out.
+	 */
+	for (i = 0; i < MEMCG_CGWB_FRN_CNT; i++) {
+		frn = &memcg->cgwb_frn[i];
+		if (frn->bdi_id == wb->bdi->id &&
+		    frn->memcg_id == wb->memcg_css->id)
+			break;
+		if (frn->at < oldest_at && atomic_read(&frn->done.cnt) == 1) {
+			oldest = i;
+			oldest_at = frn->at;
+		}
+	}
+
+	if (i < MEMCG_CGWB_FRN_CNT) {
+		/*
+		 * Re-using an existing one.  Update timestamp lazily to
+		 * avoid making the cacheline hot.  We want them to be
+		 * reasonably up-to-date and significantly shorter than
+		 * dirty_expire_interval as that's what expires the record.
+		 * Use the shorter of 1s and dirty_expire_interval / 8.
+		 */
+		unsigned long update_intv =
+			min_t(unsigned long, HZ,
+			      msecs_to_jiffies(dirty_expire_interval * 10) / 8);
+
+		if (frn->at < now - update_intv)
+			frn->at = now;
+	} else if (oldest >= 0) {
+		/* replace the oldest free one */
+		frn = &memcg->cgwb_frn[oldest];
+		frn->bdi_id = wb->bdi->id;
+		frn->memcg_id = wb->memcg_css->id;
+		frn->at = now;
+	}
+}
+
+/* issue foreign writeback flushes for recorded foreign dirtying events */
+void mem_cgroup_flush_foreign(struct bdi_writeback *wb)
+{
+	struct mem_cgroup *memcg = mem_cgroup_from_css(wb->memcg_css);
+	unsigned long intv = msecs_to_jiffies(dirty_expire_interval * 10);
+	u64 now = jiffies_64;
+	int i;
+
+	for (i = 0; i < MEMCG_CGWB_FRN_CNT; i++) {
+		struct memcg_cgwb_frn *frn = &memcg->cgwb_frn[i];
+
+		/*
+		 * If the record is older than dirty_expire_interval,
+		 * writeback on it has already started.  No need to kick it
+		 * off again.  Also, don't start a new one if there's
+		 * already one in flight.
+		 */
+		if (frn->at > now - intv && atomic_read(&frn->done.cnt) == 1) {
+			frn->at = 0;
+			cgroup_writeback_by_id(frn->bdi_id, frn->memcg_id, 0,
+					       WB_REASON_FOREIGN_FLUSH,
+					       &frn->done);
+		}
+	}
+}
+
 #else	/* CONFIG_CGROUP_WRITEBACK */
 
 static int memcg_wb_domain_init(struct mem_cgroup *memcg, gfp_t gfp)
@@ -4700,6 +4823,7 @@ static struct mem_cgroup *mem_cgroup_all
 	struct mem_cgroup *memcg;
 	unsigned int size;
 	int node;
+	int __maybe_unused i;
 
 	size = sizeof(struct mem_cgroup);
 	size += nr_node_ids * sizeof(struct mem_cgroup_per_node *);
@@ -4743,6 +4867,9 @@ static struct mem_cgroup *mem_cgroup_all
 #endif
 #ifdef CONFIG_CGROUP_WRITEBACK
 	INIT_LIST_HEAD(&memcg->cgwb_list);
+	for (i = 0; i < MEMCG_CGWB_FRN_CNT; i++)
+		memcg->cgwb_frn[i].done =
+			__WB_COMPLETION_INIT(&memcg_cgwb_frn_waitq);
 #endif
 	idr_replace(&mem_cgroup_idr, memcg, memcg->id.id);
 	return memcg;
@@ -4872,7 +4999,12 @@ static void mem_cgroup_css_released(stru
 static void mem_cgroup_css_free(struct cgroup_subsys_state *css)
 {
 	struct mem_cgroup *memcg = mem_cgroup_from_css(css);
+	int __maybe_unused i;
 
+#ifdef CONFIG_CGROUP_WRITEBACK
+	for (i = 0; i < MEMCG_CGWB_FRN_CNT; i++)
+		wb_wait_for_completion(&memcg->cgwb_frn[i].done);
+#endif
 	if (cgroup_subsys_on_dfl(memory_cgrp_subsys) && !cgroup_memory_nosocket)
 		static_branch_dec(&memcg_sockets_enabled_key);
 
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1667,6 +1667,8 @@ static void balance_dirty_pages(struct b
 		if (unlikely(!writeback_in_progress(wb)))
 			wb_start_background_writeback(wb);
 
+		mem_cgroup_flush_foreign(wb);
+
 		/*
 		 * Calculate global domain's pos_ratio and select the
 		 * global dtc by default.
@@ -2427,6 +2429,8 @@ void account_page_dirtied(struct page *p
 		task_io_account_write(PAGE_SIZE);
 		current->nr_dirtied++;
 		this_cpu_inc(bdp_ratelimits);
+
+		mem_cgroup_track_foreign_dirty(page, wb);
 	}
 }
 

  parent reply	other threads:[~2019-08-21 21:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-15 19:56 [PATCHSET v2] writeback, memcg: Implement foreign inode flushing Tejun Heo
2019-08-15 19:57 ` [PATCH 1/5] writeback: Generalize and expose wb_completion Tejun Heo
2019-08-15 19:57 ` [PATCH 2/5] bdi: Add bdi->id Tejun Heo
2019-08-15 19:58 ` [PATCH 3/5] writeback: Separate out wb_get_lookup() from wb_get_create() Tejun Heo
2019-08-16 15:45   ` Jan Kara
2019-08-15 19:59 ` [PATCH 4/5] writeback, memcg: Implement cgroup_writeback_by_id() Tejun Heo
2019-08-16 15:47   ` Jan Kara
2019-08-21 21:02   ` [PATCH v3 " Tejun Heo
2019-08-26 13:49     ` Jan Kara
2019-08-15 19:59 ` [PATCH 5/5] writeback, memcg: Implement foreign dirty flushing Tejun Heo
2019-08-16 16:02   ` Jan Kara
2019-08-21 16:00     ` Tejun Heo
2019-08-21 16:04       ` Tejun Heo
2019-08-21 21:02   ` Tejun Heo [this message]
2019-08-26 13:54     ` [PATCH v3 " Jan Kara
2019-08-26 15:58       ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821210235.GN2263813@devbig004.ftw2.facebook.com \
    --to=tj@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=axboe@kernel.dk \
    --cc=cgroups@vger.kernel.org \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=jack@suse.cz \
    --cc=kernel-team@fb.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=vdavydov.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.