All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v4 2/8] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook
Date: Thu, 22 Aug 2019 17:22:01 -0700	[thread overview]
Message-ID: <20190823002201.GD701@intel.com> (raw)
In-Reply-To: <20190627225736.2665-2-manasi.d.navare@intel.com>

Ville/Maarten/Daniel,

Could you please review this? There is no functional changes
just moving the disable part to a separate hook

Manasi


On Thu, Jun 27, 2019 at 03:57:36PM -0700, Manasi Navare wrote:
> Create a new hook commit_modeset_disables() consistent with the naming
> in drm atomic helpers and similar to the commit_modeset_enables() hook.
> This helps better organize the disable sequence in atomic_commit_tail()
> and move that to this disable hook.
> 
> No functional change
> 
> v2:
> * Create a helper for old_crtc_state disables (Lucas)
> 
> Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 116 ++++++++++++-------
>  drivers/gpu/drm/i915/i915_drv.h              |   1 +
>  2 files changed, 75 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 71e86e2f0f90..4b088fa24aad 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13613,6 +13613,69 @@ static void intel_update_crtc(struct drm_crtc *crtc,
>  	intel_finish_crtc_commit(to_intel_atomic_state(state), intel_crtc);
>  }
>  
> +static void intel_old_crtc_state_disables(struct drm_atomic_state *state,
> +					  struct intel_crtc_state *old_intel_crtc_state,
> +					  struct intel_crtc_state *new_intel_crtc_state,
> +					  struct intel_crtc *intel_crtc)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->dev);
> +	struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
> +	struct drm_crtc_state *new_crtc_state = &new_intel_crtc_state->base;
> +
> +	intel_crtc_disable_planes(intel_state, intel_crtc);
> +
> +	/*
> +	 * We need to disable pipe CRC before disabling the pipe,
> +	 * or we race against vblank off.
> +	 */
> +	intel_crtc_disable_pipe_crc(intel_crtc);
> +
> +	dev_priv->display.crtc_disable(old_intel_crtc_state, state);
> +	intel_crtc->active = false;
> +	intel_fbc_disable(intel_crtc);
> +	intel_disable_shared_dpll(old_intel_crtc_state);
> +
> +	/*
> +	 * Underruns don't always raise interrupts,
> +	 * so check manually.
> +	 */
> +	intel_check_cpu_fifo_underruns(dev_priv);
> +	intel_check_pch_fifo_underruns(dev_priv);
> +
> +	/* FIXME unify this for all platforms */
> +	if (!new_crtc_state->active &&
> +	    !HAS_GMCH(dev_priv) &&
> +	    dev_priv->display.initial_watermarks)
> +		dev_priv->display.initial_watermarks(intel_state,
> +						     new_intel_crtc_state);
> +}
> +
> +static void intel_commit_modeset_disables(struct drm_atomic_state *state)
> +{
> +	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
> +	struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;
> +	struct drm_crtc *crtc;
> +	struct intel_crtc *intel_crtc;
> +	int i;
> +
> +	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> +		old_intel_crtc_state = to_intel_crtc_state(old_crtc_state);
> +		new_intel_crtc_state = to_intel_crtc_state(new_crtc_state);
> +		intel_crtc = to_intel_crtc(crtc);
> +
> +		if (!needs_modeset(new_crtc_state))
> +			continue;
> +
> +		intel_pre_plane_update(old_intel_crtc_state, new_intel_crtc_state);
> +
> +		if (old_crtc_state->active)
> +			intel_old_crtc_state_disables(state,
> +						      old_intel_crtc_state,
> +						      new_intel_crtc_state,
> +						      intel_crtc);
> +	}
> +}
> +
>  static void intel_commit_modeset_enables(struct drm_atomic_state *state)
>  {
>  	struct drm_crtc *crtc;
> @@ -13769,7 +13832,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>  	struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
> -	struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;
> +	struct intel_crtc_state *new_intel_crtc_state;
>  	struct drm_crtc *crtc;
>  	struct intel_crtc *intel_crtc;
>  	u64 put_domains[I915_MAX_PIPES] = {};
> @@ -13778,58 +13841,24 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
>  
>  	intel_atomic_commit_fence_wait(intel_state);
>  
> -	drm_atomic_helper_wait_for_dependencies(state);
> -
> -	if (intel_state->modeset)
> -		wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
> -
>  	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> -		old_intel_crtc_state = to_intel_crtc_state(old_crtc_state);
>  		new_intel_crtc_state = to_intel_crtc_state(new_crtc_state);
>  		intel_crtc = to_intel_crtc(crtc);
>  
>  		if (needs_modeset(new_crtc_state) ||
> -		    to_intel_crtc_state(new_crtc_state)->update_pipe) {
> -
> +		    new_intel_crtc_state->update_pipe) {
>  			put_domains[intel_crtc->pipe] =
>  				modeset_get_crtc_power_domains(crtc,
> -					new_intel_crtc_state);
> +							       new_intel_crtc_state);
>  		}
> +	}
>  
> -		if (!needs_modeset(new_crtc_state))
> -			continue;
> -
> -		intel_pre_plane_update(old_intel_crtc_state, new_intel_crtc_state);
> -
> -		if (old_crtc_state->active) {
> -			intel_crtc_disable_planes(intel_state, intel_crtc);
> -
> -			/*
> -			 * We need to disable pipe CRC before disabling the pipe,
> -			 * or we race against vblank off.
> -			 */
> -			intel_crtc_disable_pipe_crc(intel_crtc);
> +	drm_atomic_helper_wait_for_dependencies(state);
>  
> -			dev_priv->display.crtc_disable(old_intel_crtc_state, state);
> -			intel_crtc->active = false;
> -			intel_fbc_disable(intel_crtc);
> -			intel_disable_shared_dpll(old_intel_crtc_state);
> +	if (intel_state->modeset)
> +		wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
>  
> -			/*
> -			 * Underruns don't always raise
> -			 * interrupts, so check manually.
> -			 */
> -			intel_check_cpu_fifo_underruns(dev_priv);
> -			intel_check_pch_fifo_underruns(dev_priv);
> -
> -			/* FIXME unify this for all platforms */
> -			if (!new_crtc_state->active &&
> -			    !HAS_GMCH(dev_priv) &&
> -			    dev_priv->display.initial_watermarks)
> -				dev_priv->display.initial_watermarks(intel_state,
> -								     new_intel_crtc_state);
> -		}
> -	}
> +	dev_priv->display.commit_modeset_disables(state);
>  
>  	/* FIXME: Eventually get rid of our intel_crtc->config pointer */
>  	for_each_new_crtc_in_state(state, crtc, new_crtc_state, i)
> @@ -15722,6 +15751,9 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
>  		dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
>  	else
>  		dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
> +
> +	dev_priv->display.commit_modeset_disables = intel_commit_modeset_disables;
> +
>  }
>  
>  static i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 075d7eb3c3f2..edb6b431f90c 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -311,6 +311,7 @@ struct drm_i915_display_funcs {
>  	void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
>  			     struct drm_atomic_state *old_state);
>  	void (*commit_modeset_enables)(struct drm_atomic_state *state);
> +	void (*commit_modeset_disables)(struct drm_atomic_state *state);
>  	void (*audio_codec_enable)(struct intel_encoder *encoder,
>  				   const struct intel_crtc_state *crtc_state,
>  				   const struct drm_connector_state *conn_state);
> -- 
> 2.19.1
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-08-23  8:12 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-24 21:08 [PATCH v3 0/8] Enable Transcoder Port Sync feature for tiled displays Manasi Navare
2019-06-24 21:08 ` [PATCH v3 1/8] drm/i915/display: Rename update_crtcs() to commit_modeset_enables() Manasi Navare
2019-08-05 22:19   ` Manasi Navare
2019-08-07  0:11   ` Tolakanahalli Pradeep, Madhumitha
2019-08-23  0:20   ` Manasi Navare
2019-08-23  6:20     ` Jani Nikula
2019-08-23 17:53       ` Manasi Navare
2019-06-24 21:08 ` [PATCH v3 2/8] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook Manasi Navare
2019-06-27 22:57   ` [PATCH v4 " Manasi Navare
2019-08-05 22:21     ` Manasi Navare
2019-08-23  0:22     ` Manasi Navare [this message]
2019-06-24 21:08 ` [PATCH v3 3/8] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync Manasi Navare
2019-06-24 21:08 ` [PATCH v3 4/8] drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports Manasi Navare
2019-06-24 21:08 ` [PATCH v3 5/8] drm/i915/display/icl: HW state readout for transcoder port sync config Manasi Navare
2019-06-24 21:08 ` [PATCH v3 6/8] drm/i915/display/icl: Enable master-slaves in trans port sync mode in correct order Manasi Navare
2019-07-30 10:53   ` Maarten Lankhorst
2019-07-31 23:24     ` Manasi Navare
2019-08-01 15:07       ` Maarten Lankhorst
2019-08-01 23:51         ` Manasi Navare
2019-08-20 21:12         ` Manasi Navare
2019-06-24 21:08 ` [PATCH v3 7/8] drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence Manasi Navare
2019-06-24 21:08 ` [PATCH v3 8/8] drm/i915/display/icl: In port sync mode disable slaves first then masters Manasi Navare
2019-06-25  6:34   ` Lucas De Marchi
2019-06-25 19:02     ` Manasi Navare
2019-06-27 20:01     ` Manasi Navare
2019-06-27 22:57   ` [PATCH v4 " Manasi Navare
2019-07-30  9:44     ` Maarten Lankhorst
2019-06-24 21:27 ` ✗ Fi.CI.CHECKPATCH: warning for Enable Transcoder Port Sync feature for Tiled displays (rev2) Patchwork
2019-06-24 21:47 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-06-27 23:38 ` ✗ Fi.CI.CHECKPATCH: warning for Enable Transcoder Port Sync feature for Tiled displays (rev4) Patchwork
2019-06-28 10:42 ` ✓ Fi.CI.BAT: success " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190823002201.GD701@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.