From: Boris Brezillon <boris.brezillon@collabora.com>
To: <Tudor.Ambarus@microchip.com>
Cc: vigneshr@ti.com, richard@nod.at, linux-kernel@vger.kernel.org,
marek.vasut@gmail.com, linux-mtd@lists.infradead.org,
miquel.raynal@bootlin.com
Subject: Re: [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method
Date: Mon, 26 Aug 2019 14:40:02 +0200 [thread overview]
Message-ID: <20190826144002.479494be@collabora.com> (raw)
In-Reply-To: <20190826120821.16351-15-tudor.ambarus@microchip.com>
On Mon, 26 Aug 2019 12:08:58 +0000
<Tudor.Ambarus@microchip.com> wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> nor->params.setup() configures the SPI NOR memory. Useful for SPI NOR
> flashes that have peculiarities to the SPI NOR standard, e.g.
> different opcodes, specific address calculation, page size, etc.
> Right now the only user will be the S3AN chips, but other
> manufacturers can implement it if needed.
>
> Move spi_nor_setup() related code in order to avoid a forward
> declaration to spi_nor_default_setup().
>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Nitpick: R-bs should normally be placed after your SoB.
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@collabora.com>
To: <Tudor.Ambarus@microchip.com>
Cc: <marek.vasut@gmail.com>, <vigneshr@ti.com>,
<miquel.raynal@bootlin.com>, <richard@nod.at>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method
Date: Mon, 26 Aug 2019 14:40:02 +0200 [thread overview]
Message-ID: <20190826144002.479494be@collabora.com> (raw)
In-Reply-To: <20190826120821.16351-15-tudor.ambarus@microchip.com>
On Mon, 26 Aug 2019 12:08:58 +0000
<Tudor.Ambarus@microchip.com> wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> nor->params.setup() configures the SPI NOR memory. Useful for SPI NOR
> flashes that have peculiarities to the SPI NOR standard, e.g.
> different opcodes, specific address calculation, page size, etc.
> Right now the only user will be the S3AN chips, but other
> manufacturers can implement it if needed.
>
> Move spi_nor_setup() related code in order to avoid a forward
> declaration to spi_nor_default_setup().
>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Nitpick: R-bs should normally be placed after your SoB.
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
next prev parent reply other threads:[~2019-08-26 12:40 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 4:21 ` Vignesh Raghavendra
2019-08-27 4:21 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 4:31 ` Vignesh Raghavendra
2019-08-27 4:31 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 4:47 ` Vignesh Raghavendra
2019-08-27 4:47 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-26 12:38 ` Boris Brezillon
2019-08-26 12:38 ` Boris Brezillon
2019-08-27 5:39 ` Vignesh Raghavendra
2019-08-27 5:39 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 5:54 ` Vignesh Raghavendra
2019-08-27 5:54 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 6:00 ` Vignesh Raghavendra
2019-08-27 6:00 ` Vignesh Raghavendra
2019-08-27 7:01 ` Tudor.Ambarus
2019-08-27 7:01 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 6:07 ` Vignesh Raghavendra
2019-08-27 6:07 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 6:36 ` Vignesh Raghavendra
2019-08-27 6:36 ` Vignesh Raghavendra
2019-08-27 6:58 ` Tudor.Ambarus
2019-08-27 6:58 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 7:08 ` Vignesh Raghavendra
2019-08-27 7:08 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 7:10 ` Vignesh Raghavendra
2019-08-27 7:10 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-27 7:13 ` Vignesh Raghavendra
2019-08-27 7:13 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:08 ` Tudor.Ambarus
2019-08-26 12:40 ` Boris Brezillon [this message]
2019-08-26 12:40 ` Boris Brezillon
2019-08-26 13:38 ` Schrempf Frieder
2019-08-26 13:38 ` Schrempf Frieder
2019-08-26 14:02 ` Boris Brezillon
2019-08-26 14:02 ` Boris Brezillon
2019-08-26 14:37 ` Schrempf Frieder
2019-08-26 14:37 ` Schrempf Frieder
2019-08-27 7:16 ` Vignesh Raghavendra
2019-08-27 7:16 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-26 12:09 ` Tudor.Ambarus
2019-08-27 7:18 ` Vignesh Raghavendra
2019-08-27 7:18 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-26 12:09 ` Tudor.Ambarus
2019-08-27 7:48 ` Vignesh Raghavendra
2019-08-27 7:48 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-26 12:09 ` Tudor.Ambarus
2019-08-27 7:35 ` Vignesh Raghavendra
2019-08-27 7:35 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-26 12:09 ` Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-26 12:09 ` Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:09 ` Tudor.Ambarus
2019-08-26 12:49 ` Boris Brezillon
2019-08-26 12:49 ` Boris Brezillon
2019-08-27 5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-27 5:33 ` Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus
2019-08-28 10:18 ` Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826144002.479494be@collabora.com \
--to=boris.brezillon@collabora.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.