All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH net-next v5 0/6] net: dsa: mv88e6xxx: Peridot/Topaz SERDES changes
@ 2019-08-26 21:31 Marek Behún
  2019-08-26 21:31 ` [PATCH net-next v5 1/6] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler Marek Behún
                   ` (6 more replies)
  0 siblings, 7 replies; 13+ messages in thread
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
  To: Vivien Didelot
  Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
	Marek Behún

Hello,

this is the fifth version of changes for the Topaz/Peridot family of
switches. The patches apply on net-next.
Changes since v4:
 - added Reviewed-by and Tested-by tags on first 2 patches, the others
   are changed are affected by changes in patch 3/6, so I did not add
   the tags, except for 5/6, which is just macro renaming
 - patch 3 was changed: the serdes_get_lane returns 0 on success (lane
   was discovered), -ENODEV if not lane is present on the port, and
   other error if other error occured. Lane is put into a pointer of
   type u8
 - patches 4 and 6 were affected by this (error detecting from
   serdes_get_lane)
 - Andrew's complaint about the two additional parameters
   (allow_over_2500 and make_cmode_writable) was addressed, by Vivien's
   advice: I put a new method into chip operations structure, named
   port_set_cmode_writable. This is called from mv88e6xxx_port_setup_mac
   just before port_set_cmode. The method is implemented for Topaz.
   The check if cmodes over 2500 should be allowed on given port is now
   done in the specific port_set_cmode() that requires it, thus the
   allow_over_2500 argument is not needed

Again, tested on Turris Mox with Peridot, Topaz, and Peridot + Topaz.

Marek

Marek Behún (6):
  net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler
  net: dsa: mv88e6xxx: update code operating on hidden registers
  net: dsa: mv88e6xxx: create serdes_get_lane chip operation
  net: dsa: mv88e6xxx: simplify SERDES code for Topaz and Peridot
  net: dsa: mv88e6xxx: rename port cmode macro
  net: dsa: mv88e6xxx: fully support SERDES on Topaz family

 drivers/net/dsa/mv88e6xxx/Makefile      |   1 +
 drivers/net/dsa/mv88e6xxx/chip.c        |  96 +++----
 drivers/net/dsa/mv88e6xxx/chip.h        |   4 +
 drivers/net/dsa/mv88e6xxx/port.c        |  89 +++++--
 drivers/net/dsa/mv88e6xxx/port.h        |  31 ++-
 drivers/net/dsa/mv88e6xxx/port_hidden.c |  70 +++++
 drivers/net/dsa/mv88e6xxx/serdes.c      | 325 ++++++++++++------------
 drivers/net/dsa/mv88e6xxx/serdes.h      |  27 +-
 8 files changed, 379 insertions(+), 264 deletions(-)
 create mode 100644 drivers/net/dsa/mv88e6xxx/port_hidden.c

-- 
2.21.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2019-08-28  4:42 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-08-26 21:31 [PATCH net-next v5 0/6] net: dsa: mv88e6xxx: Peridot/Topaz SERDES changes Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 1/6] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 2/6] net: dsa: mv88e6xxx: update code operating on hidden registers Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 3/6] net: dsa: mv88e6xxx: create serdes_get_lane chip operation Marek Behún
2019-08-26 22:17   ` Vivien Didelot
2019-08-27 13:52   ` Andrew Lunn
2019-08-26 21:31 ` [PATCH net-next v5 4/6] net: dsa: mv88e6xxx: simplify SERDES code for Topaz and Peridot Marek Behún
2019-08-27 13:54   ` Andrew Lunn
2019-08-26 21:31 ` [PATCH net-next v5 5/6] net: dsa: mv88e6xxx: rename port cmode macro Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 6/6] net: dsa: mv88e6xxx: fully support SERDES on Topaz family Marek Behún
2019-08-26 22:05   ` Vivien Didelot
2019-08-27 13:57   ` Andrew Lunn
2019-08-28  4:42 ` [PATCH net-next v5 0/6] net: dsa: mv88e6xxx: Peridot/Topaz SERDES changes David Miller

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.