All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Wilczynski <kw@linux.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	x86@kernel.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] x86/PCI: Add missing log facility and move to use pr_ macros in pcbios.c
Date: Wed, 28 Aug 2019 19:51:20 +0200	[thread overview]
Message-ID: <20190828175120.22164-1-kw@linux.com> (raw)
In-Reply-To: <20190825182557.23260-1-kw@linux.com>

Add missing log facility where two instances of printk() that did not
use any (so it would be using MESSAGE_LOGLEVEL_DEFAULT set in Kconfig)
to make all the warnings in the arch/x86/pci/pcbios.c to be printed
consistently at the same log facility.  Also resolve the following
checkpatch.pl script warning:

WARNING: printk() should include KERN_<LEVEL> facility level

While adding the missing log facility move over to using pr_ macros
over using printk(KERN_<level> ...) and DBG().

Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
---
Changes in v2:
  Change wording and include checkpatch.pl script warning.
  Leverage pr_fmt and remove "PCI: " prefix used throught.
  Move to pr_debug() over using DBG() from arch/x86/include/asm/pci_x86.h.

 arch/x86/pci/pcbios.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 9c97d814125e..ddcefb25c55e 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -3,6 +3,8 @@
  * BIOS32 and PCI BIOS handling.
  */
 
+#define pr_fmt(fmt) "PCI: " fmt
+
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -47,7 +49,7 @@ static inline void set_bios_x(void)
 	pcibios_enabled = 1;
 	set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT);
 	if (__supported_pte_mask & _PAGE_NX)
-		printk(KERN_INFO "PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
+		pr_info("PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
 }
 
 /*
@@ -111,10 +113,10 @@ static unsigned long __init bios32_service(unsigned long service)
 		case 0:
 			return address + entry;
 		case 0x80:	/* Not present */
-			printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service);
+			pr_warn("bios32_service(0x%lx): not present\n", service);
 			return 0;
 		default: /* Shouldn't happen */
-			printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
+			pr_warn("bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
 				service, return_code);
 			return 0;
 	}
@@ -160,14 +162,14 @@ static int __init check_pcibios(void)
 		minor_ver = ebx & 0xff;
 		if (pcibios_last_bus < 0)
 			pcibios_last_bus = ecx & 0xff;
-		DBG("PCI: BIOS probe returned s=%02x hw=%02x ver=%02x.%02x l=%02x\n",
+		pr_debug("BIOS probe returned s=%02x hw=%02x ver=%02x.%02x l=%02x\n",
 			status, hw_mech, major_ver, minor_ver, pcibios_last_bus);
 		if (status || signature != PCI_SIGNATURE) {
-			printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n",
+			pr_err("BIOS BUG #%x[%08x] found\n",
 				status, signature);
 			return 0;
 		}
-		printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
+		pr_info("PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
 			major_ver, minor_ver, pcibios_entry, pcibios_last_bus);
 #ifdef CONFIG_PCI_DIRECT
 		if (!(hw_mech & PCIBIOS_HW_TYPE1))
@@ -316,18 +318,18 @@ static const struct pci_raw_ops *__init pci_find_bios(void)
 		if (sum != 0)
 			continue;
 		if (check->fields.revision != 0) {
-			printk("PCI: unsupported BIOS32 revision %d at 0x%p\n",
+			pr_warn("unsupported BIOS32 revision %d at 0x%p\n",
 				check->fields.revision, check);
 			continue;
 		}
-		DBG("PCI: BIOS32 Service Directory structure at 0x%p\n", check);
+		pr_debug("BIOS32 Service Directory structure at 0x%p\n", check);
 		if (check->fields.entry >= 0x100000) {
-			printk("PCI: BIOS32 entry (0x%p) in high memory, "
+			pr_warn("BIOS32 entry (0x%p) in high memory, "
 					"cannot use.\n", check);
 			return NULL;
 		} else {
 			unsigned long bios32_entry = check->fields.entry;
-			DBG("PCI: BIOS32 Service Directory entry at 0x%lx\n",
+			pr_debug("BIOS32 Service Directory entry at 0x%lx\n",
 					bios32_entry);
 			bios32_indirect.address = bios32_entry + PAGE_OFFSET;
 			set_bios_x();
@@ -366,7 +368,7 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
 	opt.size = PAGE_SIZE;
 	opt.segment = __KERNEL_DS;
 
-	DBG("PCI: Fetching IRQ routing table... ");
+	pr_debug("Fetching IRQ routing table... ");
 	__asm__("push %%es\n\t"
 		"push %%ds\n\t"
 		"pop  %%es\n\t"
@@ -384,9 +386,9 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
 		  "S" (&pci_indirect),
 		  "m" (opt)
 		: "memory");
-	DBG("OK  ret=%d, size=%d, map=%x\n", ret, opt.size, map);
+	pr_debug("OK  ret=%d, size=%d, map=%x\n", ret, opt.size, map);
 	if (ret & 0xff00)
-		printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
+		pr_err("Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
 	else if (opt.size) {
 		rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
 		if (rt) {
@@ -394,7 +396,7 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
 			rt->size = opt.size + sizeof(struct irq_routing_table);
 			rt->exclusive_irqs = map;
 			memcpy(rt->slots, (void *) page, opt.size);
-			printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n");
+			pr_info("Using BIOS Interrupt Routing Table\n");
 		}
 	}
 	free_page(page);
-- 
2.22.1


  parent reply	other threads:[~2019-08-28 17:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-25 18:25 [PATCH] x86/PCI: Add missing log facility and move to use pr_ macros in pcbios.c Krzysztof Wilczynski
2019-08-27 22:47 ` Bjorn Helgaas
2019-08-28 10:59   ` Krzysztof Wilczynski
2019-08-28 17:51 ` Krzysztof Wilczynski [this message]
2019-08-28 18:02   ` [PATCH v2] " Joe Perches
2019-08-28 18:40     ` Krzysztof Wilczynski
2019-08-28 18:43       ` Joe Perches
2019-08-28 18:58         ` Krzysztof Wilczynski
2019-08-29 17:11   ` [PATCH v3] x86/PCI: Add missing log facility and move to use pr_ macros Krzysztof Wilczynski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190828175120.22164-1-kw@linux.com \
    --to=kw@linux.com \
    --cc=bp@alien8.de \
    --cc=helgaas@kernel.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.