From: pavel@denx.de (Pavel Machek)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.4.y-cip 00/17] Add USB2.0 support
Date: Thu, 29 Aug 2019 09:00:11 +0200 [thread overview]
Message-ID: <20190829070011.GB10041@amd> (raw)
In-Reply-To: <1566982115-11148-1-git-send-email-biju.das@bp.renesas.com>
On Wed 2019-08-28 09:48:18, Biju Das wrote:
> This patch series add USB2.0 support for iWave iwg23s sbc based on RZ/G1C.
>
> This patch series is based on linux-4.4.y-cip and all the patches
> in this series are cherry-picked from linux rc tree.
Thanks for the series, applied and pushed out.
Best regards,
Pavel
> Biju Das (16):
> dt-bindings: phy: rcar-gen2: Add r8a7744 support
> dt-bindings: phy: rcar-gen2: Add r8a77470 support
> dt-bindings: rcar-gen3-phy-usb2: Add r8a77470 support
> phy: phy-rcar-gen2: Add support for r8a77470
> phy: rcar-gen3-usb2: Add support for r8a77470
> ARM: dts: r8a77470: Add USB-DMAC device nodes
> ARM: dts: r8a77470: Add USB PHY DT support
> ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device
> ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
> ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in
> shmobile_defconfig
> ARM: dts: iwg23s-sbc: Enable USB Phy[01]
> ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host
> dt-bindings: usb: renesas_usbhs: Add support for r8a7744
> dt-bindings: usb: renesas_usbhs: Add support for r8a77470
> ARM: dts: r8a77470: Add HSUSB device nodes
> ARM: dts: iwg23s-sbc: Enable HS-USB
>
> Yoshihiro Shimoda (1):
> phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver
>
> .../devicetree/bindings/phy/rcar-gen2-phy.txt | 48 ++++-
> .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 39 ++++
> .../devicetree/bindings/usb/renesas_usbhs.txt | 2 +
> arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 44 ++++
> arch/arm/boot/dts/r8a77470.dtsi | 185 ++++++++++++++++
> arch/arm/configs/shmobile_defconfig | 3 +
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-rcar-gen2.c | 130 ++++++++++--
> drivers/phy/phy-rcar-gen3-usb2.c | 236 +++++++++++++++++++++
> 10 files changed, 682 insertions(+), 13 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> create mode 100644 drivers/phy/phy-rcar-gen3-usb2.c
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190829/e3838ed3/attachment.sig>
prev parent reply other threads:[~2019-08-29 7:00 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 8:48 [cip-dev] [PATCH 4.4.y-cip 00/17] Add USB2.0 support Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 01/17] dt-bindings: phy: rcar-gen2: Add r8a7744 support Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 02/17] dt-bindings: phy: rcar-gen2: Add r8a77470 support Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 03/17] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver Biju Das
2019-08-28 11:02 ` Pavel Machek
2019-08-28 12:20 ` Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 04/17] dt-bindings: rcar-gen3-phy-usb2: Add r8a77470 support Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 05/17] phy: phy-rcar-gen2: Add support for r8a77470 Biju Das
2019-08-28 11:12 ` Pavel Machek
2019-08-28 12:49 ` Biju Das
2019-08-29 6:59 ` Pavel Machek
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 06/17] phy: rcar-gen3-usb2: " Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 07/17] ARM: dts: r8a77470: Add USB-DMAC device nodes Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 08/17] ARM: dts: r8a77470: Add USB PHY DT support Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 09/17] ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 10/17] ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 11/17] ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support " Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 12/17] ARM: dts: iwg23s-sbc: Enable USB Phy[01] Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 13/17] ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 14/17] dt-bindings: usb: renesas_usbhs: Add support for r8a7744 Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 15/17] dt-bindings: usb: renesas_usbhs: Add support for r8a77470 Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 16/17] ARM: dts: r8a77470: Add HSUSB device nodes Biju Das
2019-08-28 8:48 ` [cip-dev] [PATCH 4.4.y-cip 17/17] ARM: dts: iwg23s-sbc: Enable HS-USB Biju Das
2019-08-29 7:00 ` Pavel Machek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190829070011.GB10041@amd \
--to=pavel@denx.de \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.