All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function
Date: Thu, 29 Aug 2019 14:18:14 -0700	[thread overview]
Message-ID: <20190829211814.GK701@intel.com> (raw)
In-Reply-To: <20190828224701.422-1-manasi.d.navare@intel.com>

Thanks for the review pushed to dinq

Manasi

On Wed, Aug 28, 2019 at 03:47:01PM -0700, Manasi Navare wrote:
> Create a new function intel_commit_modeset_disables() consistent with the naming
> in drm atomic helpers and similar to the enable function.
> This helps better organize the disable sequence in atomic_commit_tail()
> 
> No functional change
> 
> v4:
> * Do not create a function pointer, just a function (Maarten)
> v3:
> * Rebase (Manasi)
> v2:
> * Create a helper for old_crtc_state disables (Lucas)
> 
> Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 92 ++++++++++++--------
>  drivers/gpu/drm/i915/i915_drv.h              |  1 +
>  2 files changed, 59 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 77dfb0f6a6e0..5c53b45dc06e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13758,6 +13758,61 @@ static void intel_update_crtc(struct intel_crtc *crtc,
>  	intel_finish_crtc_commit(state, crtc);
>  }
>  
> +static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
> +					  struct intel_crtc_state *old_crtc_state,
> +					  struct intel_crtc_state *new_crtc_state,
> +					  struct intel_crtc *crtc)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +
> +	intel_crtc_disable_planes(state, crtc);
> +
> +	/*
> +	 * We need to disable pipe CRC before disabling the pipe,
> +	 * or we race against vblank off.
> +	 */
> +	intel_crtc_disable_pipe_crc(crtc);
> +
> +	dev_priv->display.crtc_disable(old_crtc_state, state);
> +	crtc->active = false;
> +	intel_fbc_disable(crtc);
> +	intel_disable_shared_dpll(old_crtc_state);
> +
> +	/*
> +	 * Underruns don't always raise interrupts,
> +	 * so check manually.
> +	 */
> +	intel_check_cpu_fifo_underruns(dev_priv);
> +	intel_check_pch_fifo_underruns(dev_priv);
> +
> +	/* FIXME unify this for all platforms */
> +	if (!new_crtc_state->base.active &&
> +	    !HAS_GMCH(dev_priv) &&
> +	    dev_priv->display.initial_watermarks)
> +		dev_priv->display.initial_watermarks(state,
> +						     new_crtc_state);
> +}
> +
> +static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> +{
> +	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> +	struct intel_crtc *crtc;
> +	int i;
> +
> +	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> +		if (!needs_modeset(new_crtc_state))
> +			continue;
> +
> +		intel_pre_plane_update(old_crtc_state, new_crtc_state);
> +
> +		if (old_crtc_state->base.active)
> +			intel_old_crtc_state_disables(state,
> +						      old_crtc_state,
> +						      new_crtc_state,
> +						      crtc);
> +	}
> +}
> +
>  static void intel_commit_modeset_enables(struct intel_atomic_state *state)
>  {
>  	struct intel_crtc *crtc;
> @@ -13938,42 +13993,10 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
>  			put_domains[crtc->pipe] =
>  				modeset_get_crtc_power_domains(new_crtc_state);
>  		}
> -
> -		if (!needs_modeset(new_crtc_state))
> -			continue;
> -
> -		intel_pre_plane_update(old_crtc_state, new_crtc_state);
> -
> -		if (old_crtc_state->base.active) {
> -			intel_crtc_disable_planes(state, crtc);
> -
> -			/*
> -			 * We need to disable pipe CRC before disabling the pipe,
> -			 * or we race against vblank off.
> -			 */
> -			intel_crtc_disable_pipe_crc(crtc);
> -
> -			dev_priv->display.crtc_disable(old_crtc_state, state);
> -			crtc->active = false;
> -			intel_fbc_disable(crtc);
> -			intel_disable_shared_dpll(old_crtc_state);
> -
> -			/*
> -			 * Underruns don't always raise
> -			 * interrupts, so check manually.
> -			 */
> -			intel_check_cpu_fifo_underruns(dev_priv);
> -			intel_check_pch_fifo_underruns(dev_priv);
> -
> -			/* FIXME unify this for all platforms */
> -			if (!new_crtc_state->base.active &&
> -			    !HAS_GMCH(dev_priv) &&
> -			    dev_priv->display.initial_watermarks)
> -				dev_priv->display.initial_watermarks(state,
> -								     new_crtc_state);
> -		}
>  	}
>  
> +	intel_commit_modeset_disables(state);
> +
>  	/* FIXME: Eventually get rid of our crtc->config pointer */
>  	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
>  		crtc->config = new_crtc_state;
> @@ -15929,6 +15952,7 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
>  		dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
>  	else
>  		dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
> +
>  }
>  
>  static i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 75a42e8df67e..db7480831e52 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -289,6 +289,7 @@ struct drm_i915_display_funcs {
>  	void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
>  			     struct intel_atomic_state *old_state);
>  	void (*commit_modeset_enables)(struct intel_atomic_state *state);
> +	void (*commit_modeset_disables)(struct intel_atomic_state *state);
>  	void (*audio_codec_enable)(struct intel_encoder *encoder,
>  				   const struct intel_crtc_state *crtc_state,
>  				   const struct drm_connector_state *conn_state);
> -- 
> 2.19.1
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-08-29 21:16 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-27 22:17 [PATCH 0/2] Transcoder Port Sync preparation refactoring/renaming Manasi Navare
2019-08-27 22:17 ` [PATCH 1/2] drm/i915/display: Rename update_crtcs() to commit_modeset_enables() Manasi Navare
2019-08-28 17:11   ` Manasi Navare
2019-08-29  7:44     ` Maarten Lankhorst
2019-08-29 21:17     ` Manasi Navare
2019-08-27 22:17 ` [PATCH 2/2] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook Manasi Navare
2019-08-28  6:30   ` Maarten Lankhorst
2019-08-28 17:09     ` Manasi Navare
2019-08-28 22:47   ` [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function Manasi Navare
2019-08-29  7:30     ` Maarten Lankhorst
2019-08-29 21:18     ` Manasi Navare [this message]
2019-08-30 10:20     ` Maarten Lankhorst
2019-08-28  9:07 ` ✓ Fi.CI.BAT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-28 23:20 ` ✗ Fi.CI.CHECKPATCH: warning for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork
2019-08-29  4:33 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-29 10:06 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-29 11:19 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190829211814.GK701@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.