Re: [dpdk-dev] net/ixgbe:fix wrong link status

[Ye Xiaolong <xiaolong.ye@intel.com>]

Hi, Xiao

On 09/02, Zhang Xiao wrote:
>The link status for 82599eb got from link status register was not correct,

So there is a HW issue, right?

Thanks,
Xiaolong

>check the enable/disable flag of tx laser when getting the link status,
>set the link status down if tx laser disabled since the tx laser flag
>could be set correctly when up/down the link status.
>
>Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
>Cc: stable@dpdk.org
>
>Signed-off-by: Zhang Xiao <xiao.zhang@intel.com>
>---
> drivers/net/ixgbe/ixgbe_ethdev.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>index 87d2ad0..fc06a1a 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.c
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>@@ -2864,6 +2864,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
> 	} else {
> 		/* Turn on the laser */
> 		ixgbe_enable_tx_laser(hw);
>+		ixgbe_dev_link_update(dev, 0);
> 	}
> 
> 	return 0;
>@@ -2894,6 +2895,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
> 	} else {
> 		/* Turn off the laser */
> 		ixgbe_disable_tx_laser(hw);
>+		ixgbe_dev_link_update(dev, 0);
> 	}
> 
> 	return 0;
>@@ -3967,6 +3969,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> 	u32 speed = 0;
> 	int wait = 1;
> 	bool autoneg = false;
>+	u32 esdp_reg;
> 
> 	memset(&link, 0, sizeof(link));
> 	link.link_status = ETH_LINK_DOWN;
>@@ -3999,6 +4002,10 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> 		return rte_eth_linkstatus_set(dev, &link);
> 	}
> 
>+	esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
>+	if ((esdp_reg & IXGBE_ESDP_SDP3))
>+		link_up = 0;
>+
> 	if (link_up == 0) {
> 		intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
> 		return rte_eth_linkstatus_set(dev, &link);
>-- 
>2.7.4
>