From: Guenter Roeck <linux@roeck-us.net>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-i2c@vger.kernel.org, Marc Hulsman <m.hulsman@tudelft.nl>,
Jean Delvare <jdelvare@suse.com>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 1/3] hwmon: w83791d: convert to use devm_i2c_new_dummy_device
Date: Tue, 3 Sep 2019 12:44:15 -0700 [thread overview]
Message-ID: <20190903194415.GA32494@roeck-us.net> (raw)
In-Reply-To: <20190903181256.13450-2-wsa+renesas@sang-engineering.com>
On Tue, Sep 03, 2019 at 08:12:54PM +0200, Wolfram Sang wrote:
> And simplify the error handling.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/w83791d.c | 32 +++++++++-----------------------
> 1 file changed, 9 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
> index 050ad4201691..aad8d4da5802 100644
> --- a/drivers/hwmon/w83791d.c
> +++ b/drivers/hwmon/w83791d.c
> @@ -1260,7 +1260,7 @@ static int w83791d_detect_subclients(struct i2c_client *client)
> struct i2c_adapter *adapter = client->adapter;
> struct w83791d_data *data = i2c_get_clientdata(client);
> int address = client->addr;
> - int i, id, err;
> + int i, id;
> u8 val;
>
> id = i2c_adapter_id(adapter);
> @@ -1272,8 +1272,7 @@ static int w83791d_detect_subclients(struct i2c_client *client)
> "invalid subclient "
> "address %d; must be 0x48-0x4f\n",
> force_subclients[i]);
> - err = -ENODEV;
> - goto error_sc_0;
> + return -ENODEV;
> }
> }
> w83791d_write(client, W83791D_REG_I2C_SUBADDR,
> @@ -1283,29 +1282,22 @@ static int w83791d_detect_subclients(struct i2c_client *client)
>
> val = w83791d_read(client, W83791D_REG_I2C_SUBADDR);
> if (!(val & 0x08))
> - data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
> + data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter,
> + 0x48 + (val & 0x7));
> if (!(val & 0x80)) {
> - if ((data->lm75[0] != NULL) &&
> + if (!IS_ERR(data->lm75[0]) &&
> ((val & 0x7) == ((val >> 4) & 0x7))) {
> dev_err(&client->dev,
> "duplicate addresses 0x%x, "
> "use force_subclient\n",
> data->lm75[0]->addr);
> - err = -ENODEV;
> - goto error_sc_1;
> + return -ENODEV;
> }
> - data->lm75[1] = i2c_new_dummy(adapter,
> - 0x48 + ((val >> 4) & 0x7));
> + data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter,
> + 0x48 + ((val >> 4) & 0x7));
> }
>
> return 0;
> -
> -/* Undo inits in case of errors */
> -
> -error_sc_1:
> - i2c_unregister_device(data->lm75[0]);
> -error_sc_0:
> - return err;
> }
>
>
> @@ -1394,7 +1386,7 @@ static int w83791d_probe(struct i2c_client *client,
> /* Register sysfs hooks */
> err = sysfs_create_group(&client->dev.kobj, &w83791d_group);
> if (err)
> - goto error3;
> + return err;
>
> /* Check if pins of fan/pwm 4-5 are in use as GPIO */
> has_fanpwm45 = w83791d_read(client, W83791D_REG_GPIO) & 0x10;
> @@ -1419,9 +1411,6 @@ static int w83791d_probe(struct i2c_client *client,
> sysfs_remove_group(&client->dev.kobj, &w83791d_group_fanpwm45);
> error4:
> sysfs_remove_group(&client->dev.kobj, &w83791d_group);
> -error3:
> - i2c_unregister_device(data->lm75[0]);
> - i2c_unregister_device(data->lm75[1]);
> return err;
> }
>
> @@ -1432,9 +1421,6 @@ static int w83791d_remove(struct i2c_client *client)
> hwmon_device_unregister(data->hwmon_dev);
> sysfs_remove_group(&client->dev.kobj, &w83791d_group);
>
> - i2c_unregister_device(data->lm75[0]);
> - i2c_unregister_device(data->lm75[1]);
> -
> return 0;
> }
>
next prev parent reply other threads:[~2019-09-03 19:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-03 18:12 [PATCH RESEND 0/3] hwmon: convert remaining drivers to i2c_new_dummy_device() Wolfram Sang
2019-09-03 18:12 ` [PATCH RESEND 1/3] hwmon: w83791d: convert to use devm_i2c_new_dummy_device Wolfram Sang
2019-09-03 19:44 ` Guenter Roeck [this message]
2019-09-03 18:12 ` [PATCH RESEND 2/3] hwmon: w83792d: " Wolfram Sang
2019-09-03 19:45 ` Guenter Roeck
2019-09-03 18:12 ` [PATCH RESEND 3/3] hwmon: w83793d: " Wolfram Sang
2019-09-03 19:46 ` Guenter Roeck
2019-09-03 18:33 ` [PATCH RESEND 0/3] hwmon: convert remaining drivers to i2c_new_dummy_device() Guenter Roeck
2019-09-03 18:37 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190903194415.GA32494@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.hulsman@tudelft.nl \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.