Re: [PATCH] USB: dummy-hcd: fix power budget for SuperSpeed mode

[Greg KH <gregkh@linuxfoundation.org>]

On Wed, Sep 04, 2019 at 10:54:28AM +0300, Felipe Balbi wrote:
> 
> Hi,
> 
> <Jacky.Cao@sony.com> writes:
> 
> > The power budget for SuperSpeed mode should be 900 mA
> > according to USB3.0 specification, so set the power
> > budget to 900 mA for dummy_start_ss which is only used
> > for SuperSpeed mode.
> >
> > If the max power consumption of SuperSpeed device is
> > larger than 500 mA, insufficient available bus power
> > error happens in usb_choose_configuration function
> > when the device connects to dummy hcd.
> >
> > Signed-off-by: Jacky Cao <Jacky.Cao@sony.com>
> > ---
> > drivers/usb/gadget/udc/dummy_hcd.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
> > index 8414fac..52f2cf5 100644
> > --- a/drivers/usb/gadget/udc/dummy_hcd.c
> > +++ b/drivers/usb/gadget/udc/dummy_hcd.c
> > @@ -48,6 +48,7 @@
> > #define DRIVER_VERSION "02 May 2005"
> >
> >  #define POWER_BUDGET  500  /* in mA; use 8 for low-power port testing */
> > +#define POWER_BUDGET_3_0  900  /* in mA */
> >
> >  static const char  driver_name[] = "dummy_hcd";
> > static const char  driver_desc[] = "USB Host+Gadget Emulator";
> > @@ -2432,7 +2433,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd)
> >      dum_hcd->rh_state = DUMMY_RH_RUNNING;
> >      dum_hcd->stream_en_ep = 0;
> >      INIT_LIST_HEAD(&dum_hcd->urbp_list);
> > -     dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
> > +     dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3_0;
> >      dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
> >      dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
> > #ifdef CONFIG_USB_OTG
> 
> Alan, I suppose you're okay with this change?

I'm not ok with the whitespace damage making this patch impossible to
apply :)