Re: [dpdk-dev] [PATCH] ethdev: fix typos for ENOTSUP

[Stephen Hemminger <stephen@networkplumber.org>]

On Wed,  4 Sep 2019 22:05:31 +0800
Xiaolong Ye <xiaolong.ye@intel.com> wrote:

> Fixes: af75078fece3 ("first public release")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
> ---
>  lib/librte_ethdev/rte_ethdev.h | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index dc6596bc9..51e2caf79 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -2477,7 +2477,7 @@ int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu);
>   *   Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*.
>   * @return
>   *   - (0) if successful.
> - *   - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
> + *   - (-ENOTSUP) if hardware-assisted VLAN filtering not configured.
>   *   - (-ENODEV) if *port_id* invalid.
>   *   - (-EIO) if device is removed.
>   *   - (-ENOSYS) if VLAN filtering on *port_id* disabled.
> @@ -2500,7 +2500,7 @@ int rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on);
>   *   If 0, Disable VLAN Stripping of the receive queue of the Ethernet port.
>   * @return
>   *   - (0) if successful.
> - *   - (-ENOSUP) if hardware-assisted VLAN stripping not configured.
> + *   - (-ENOTSUP) if hardware-assisted VLAN stripping not configured.
>   *   - (-ENODEV) if *port_id* invalid.
>   *   - (-EINVAL) if *rx_queue_id* invalid.
>   */
> @@ -2520,7 +2520,7 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint16_t port_id, uint16_t rx_queue_id,
>   *   The Tag Protocol ID
>   * @return
>   *   - (0) if successful.
> - *   - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
> + *   - (-ENOTSUP) if hardware-assisted VLAN TPID setup is not supported.
>   *   - (-ENODEV) if *port_id* invalid.
>   *   - (-EIO) if device is removed.
>   */
> @@ -2546,7 +2546,7 @@ int rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
>   *       ETH_QINQ_STRIP_OFFLOAD
>   * @return
>   *   - (0) if successful.
> - *   - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
> + *   - (-ENOTSUP) if hardware-assisted VLAN filtering not configured.
>   *   - (-ENODEV) if *port_id* invalid.
>   *   - (-EIO) if device is removed.
>   */

Acked-by: Stephen Hemminger <stephen@networkplumber.org>