From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michael Trimarchi <michael@amarulasolutions.com>
Date: Sat, 14 Sep 2019 14:17:09 +0200
Subject: [U-Boot] Tinker-rk3288 SPL broken with MMC timeout
In-Reply-To: <CAMty3ZCipUZC9G=jA1aTJCcU9OoHEVAYKdCn6O_Z+QW1fqMc2g@mail.gmail.com>
References: <CAMty3ZDXRCOdeesc13-E4mTO=jr3aoF4LgV3zCJ186VsxyTDFQ@mail.gmail.com>
 <20190912145553.GK6927@bill-the-cat>
 <CAMty3ZCipUZC9G=jA1aTJCcU9OoHEVAYKdCn6O_Z+QW1fqMc2g@mail.gmail.com>
Message-ID: <20190914121708.GA1304@panicking>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, Sep 13, 2019 at 08:11:17AM +0530, Jagan Teki wrote:
> On Thu, Sep 12, 2019 at 8:25 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Thu, Sep 12, 2019 at 08:55:24AM +0530, Jagan Teki wrote:
> >
> > > I have seen this even on v2019.07 release, and the only release that
> > > it got working with on v2019.01 (SPL, BROM_RETURN)
> > >
> > > Any idea? here is the log dump.
> > >
> > > U-Boot TPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36)
> > > Trying to boot from BOOTROM
> > > Returning to boot ROM...
> > >
> > > U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530)
> > > Trying to boot from MMC1
> > > spl: mmc init failed with error: -110
> > > SPL: failed to boot from all boot devices
> > > ### ERROR ### Please RESET the board ###
> >
> > Time to run 'git bisect' since you know when it worked last at least?
> 
> Look hard to bisect, few of commits in between seems SPL size
> blow-out, doesn't boot etc. May be verify with respect boards might
> help.

Well I think that ddr should follow the same rule of rk3399, but still
the mmc is not working