From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 16 Sep 2019 23:36:23 +0200 Subject: [Buildroot] [autobuild.buildroot.net] Your daily results for 2019-09-13 In-Reply-To: References: Message-ID: <20190916233623.676bd27d@windsurf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Oleksandr, On Mon, 16 Sep 2019 15:19:15 -0400 Oleksandr G Zhadan wrote: > I? re-built and re-tested images from fresh today's clone of buildroot > on both, uCLS1012A and uCP1020 modules . Everything works OK on real > hardware. > > I am not familiar with your run-time test procedures and have not enough > info to "fix" working images to pass that test. defconfigs are not runtime tested, they are only build tested. > > Base on the error from link you pointed to: > > ERROR: Job failed (system failure): Error response from daemon: mkdir > /home/docker/aufs/mnt/2d951eb14738916f4779f5f7633bd64272a8286b6fcac64f191e7c5d61b0e678-init: > no space left on device (executor_docker.go:743:0s) As you can see from the error, it was just the build machine that was used to build these particular defconfigs that ran out of disk space. I fixed the disk space issue on this build server, and restarted a new test of all defconfigs. This new test is at https://gitlab.com/buildroot.org/buildroot/pipelines/82198743/builds, and you can see that both of your defconfigs built correctly. Best regards, Thomas Petazzoni -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com