Re: [PATCH v3 bpf-next 07/14] samples: bpf: add makefile.target for separate CC target build

[Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>]

On Tue, Sep 17, 2019 at 04:19:40PM -0700, Andrii Nakryiko wrote:
>On Mon, Sep 16, 2019 at 3:58 AM Ivan Khoronzhuk
><ivan.khoronzhuk@linaro.org> wrote:
>>
>> The makefile.target is added only and will be used in
>
>typo: Makefile
>
>> sample/bpf/Makefile later in order to switch cross-compiling on CC
>
>on -> to
>
>> from HOSTCC environment.
>>
>> The HOSTCC is supposed to build binaries and tools running on the host
>> afterwards, in order to simplify build or so, like "fixdep" or else.
>> In case of cross compiling "fixdep" is executed on host when the rest
>> samples should run on target arch. In order to build binaries for
>> target arch with CC and tools running on host with HOSTCC, lets add
>> Makefile.target for simplicity, having definition and routines similar
>> to ones, used in script/Makefile.host. This allows later add
>> cross-compilation to samples/bpf with minimum changes.
>>
>> The tprog stands for target programs built with CC.
>
>Why tprog? Could we just use prog: hostprog vs prog.
Prev. version was with prog, but Yonghong Song found it ambiguous.
As prog can be bpf also. So, decision was made to follow logic:
* target prog - non bpf progs
* bpf prog = bpf prog, that can be later smth similar, providing build options
  for each bpf object separately.

Details here:
https://lkml.org/lkml/2019/9/13/1037

>
>>
>> Makefile.target contains only stuff needed for samples/bpf, potentially
>> can be reused later and now needed only for unblocking tricky
>> samples/bpf cross compilation.
>>
>> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
>> ---
>>  samples/bpf/Makefile.target | 75 +++++++++++++++++++++++++++++++++++++
>>  1 file changed, 75 insertions(+)
>>  create mode 100644 samples/bpf/Makefile.target
>>
>> diff --git a/samples/bpf/Makefile.target b/samples/bpf/Makefile.target
>> new file mode 100644
>> index 000000000000..fb6de63f7d2f
>> --- /dev/null
>> +++ b/samples/bpf/Makefile.target
>> @@ -0,0 +1,75 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +# ==========================================================================
>> +# Building binaries on the host system
>> +# Binaries are not used during the compilation of the kernel, and intendent
>
>typo: intended
>
>> +# to be build for target board, target board can be host ofc. Added to build
>
>What's ofc, is it "of course"?
yes, ofc )

>
>> +# binaries to run not on host system.
>> +#
>> +# Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
>> +# tprogs-y := xsk_example
>> +# Will compile xdpsock_example.c and create an executable named xsk_example
>
>You mix references to xsk_example and xdpsock_example, which is very
>confusing. I'm guessing you meant to use xdpsock_example consistently.
Oh, yes. Thanks.

>
>> +#
>> +# tprogs-y    := xdpsock
>> +# xdpsock-objs := xdpsock_1.o xdpsock_2.o
>> +# Will compile xdpsock_1.c and xdpsock_2.c, and then link the executable
>> +# xdpsock, based on xdpsock_1.o and xdpsock_2.o
>> +#
>> +# Inherited from scripts/Makefile.host
>
>"Inspired by" or "Derived from" would be probably more appropriate term :)
I will replace with "Derived from", looks better.

>
>> +#
>> +__tprogs := $(sort $(tprogs-y))
>> +
>> +# C code
>> +# Executables compiled from a single .c file
>> +tprog-csingle  := $(foreach m,$(__tprogs), \
>> +                       $(if $($(m)-objs),,$(m)))
>> +
>> +# C executables linked based on several .o files
>> +tprog-cmulti   := $(foreach m,$(__tprogs),\
>> +                       $(if $($(m)-objs),$(m)))
>> +
>> +# Object (.o) files compiled from .c files
>> +tprog-cobjs    := $(sort $(foreach m,$(__tprogs),$($(m)-objs)))
>> +
>> +tprog-csingle  := $(addprefix $(obj)/,$(tprog-csingle))
>> +tprog-cmulti   := $(addprefix $(obj)/,$(tprog-cmulti))
>> +tprog-cobjs    := $(addprefix $(obj)/,$(tprog-cobjs))
>> +
>> +#####
>> +# Handle options to gcc. Support building with separate output directory
>> +
>> +_tprogc_flags   = $(TPROGS_CFLAGS) \
>> +                 $(TPROGCFLAGS_$(basetarget).o)
>> +
>> +# $(objtree)/$(obj) for including generated headers from checkin source files
>> +ifeq ($(KBUILD_EXTMOD),)
>> +ifdef building_out_of_srctree
>> +_tprogc_flags   += -I $(objtree)/$(obj)
>> +endif
>> +endif
>> +
>> +tprogc_flags    = -Wp,-MD,$(depfile) $(_tprogc_flags)
>> +
>> +# Create executable from a single .c file
>> +# tprog-csingle -> Executable
>> +quiet_cmd_tprog-csingle        = CC  $@
>> +      cmd_tprog-csingle        = $(CC) $(tprogc_flags) $(TPROGS_LDFLAGS) -o $@ $< \
>> +               $(TPROGS_LDLIBS) $(TPROGLDLIBS_$(@F))
>> +$(tprog-csingle): $(obj)/%: $(src)/%.c FORCE
>> +       $(call if_changed_dep,tprog-csingle)
>> +
>> +# Link an executable based on list of .o files, all plain c
>> +# tprog-cmulti -> executable
>> +quiet_cmd_tprog-cmulti = LD  $@
>> +      cmd_tprog-cmulti = $(CC) $(tprogc_flags) $(TPROGS_LDFLAGS) -o $@ \
>> +                         $(addprefix $(obj)/,$($(@F)-objs)) \
>> +                         $(TPROGS_LDLIBS) $(TPROGLDLIBS_$(@F))
>> +$(tprog-cmulti): $(tprog-cobjs) FORCE
>> +       $(call if_changed,tprog-cmulti)
>> +$(call multi_depend, $(tprog-cmulti), , -objs)
>> +
>> +# Create .o file from a single .c file
>> +# tprog-cobjs -> .o
>> +quiet_cmd_tprog-cobjs  = CC  $@
>> +      cmd_tprog-cobjs  = $(CC) $(tprogc_flags) -c -o $@ $<
>> +$(tprog-cobjs): $(obj)/%.o: $(src)/%.c FORCE
>> +       $(call if_changed_dep,tprog-cobjs)
>> --
>> 2.17.1
>>
>
>tprogs is quite confusing, but overall looks good to me.
I tend to leave it as tprogs, unless it's going to be progs and agreed with
Yonghong.

It follows logic:
- tprogs for bins
- bpfprogs or bojs or bprogs (could be) for bpf obj

-- 
Regards,
Ivan Khoronzhuk