From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
uma.shankar@intel.com, jani.saarinen@intel.com
Subject: Re: [PATCH v8 6/7] drm/i915/dp: Program an Infoframe SDP Header and DB for HDR Static Metadata
Date: Wed, 18 Sep 2019 17:13:43 +0300 [thread overview]
Message-ID: <20190918141343.GL1208@intel.com> (raw)
In-Reply-To: <20190916071150.9309-7-gwan-gyeong.mun@intel.com>
On Mon, Sep 16, 2019 at 10:11:49AM +0300, Gwan-gyeong Mun wrote:
> Function intel_dp_setup_hdr_metadata_infoframe_sdp handles Infoframe SDP
> header and data block setup for HDR Static Metadata. It enables writing of
> HDR metadata infoframe SDP to panel. Support for HDR video was introduced
> in DisplayPort 1.4. It implements the CTA-861-G standard for transport of
> static HDR metadata. The HDR Metadata will be provided by userspace
> compositors, based on blending policies and passed to the driver through
> a blob property.
>
> Because each of GEN11 and prior GEN11 have different register size for
> HDR Metadata Infoframe SDP packet, it adds and uses different register
> size.
>
> Setup Infoframe SDP header and data block in function
> intel_dp_setup_hdr_metadata_infoframe_sdp for HDR Static Metadata as per
> dp 1.4 spec and CTA-861-F spec.
> As per DP 1.4 spec, 2.2.2.5 SDP Formats. It enables Dynamic Range and
> Mastering Infoframe for HDR content, which is defined in CTA-861-F spec.
> According to DP 1.4 spec and CEA-861-F spec Table 5, in order to transmit
> static HDR metadata, we have to use Non-audio INFOFRAME SDP v1.3.
>
> +--------------------------------+-------------------------------+
> | [ Packet Type Value ] | [ Packet Type ] |
> +--------------------------------+-------------------------------+
> | 80h + Non-audio INFOFRAME Type | CEA-861-F Non-audio INFOFRAME |
> +--------------------------------+-------------------------------+
> | [Transmission Timing] |
> +----------------------------------------------------------------+
> | As per CEA-861-F for INFOFRAME, including CEA-861.3 within |
> | which Dynamic Range and Mastering INFOFRAME are defined |
> +----------------------------------------------------------------+
>
> v2: Add a missed blank line after function declaration.
> v3: Remove not handled return values from
> intel_dp_setup_hdr_metadata_infoframe_sdp(). [Uma]
>
> Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 1 +
> drivers/gpu/drm/i915/display/intel_dp.c | 89 ++++++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_dp.h | 3 +
> 3 files changed, 93 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 8dc030650801..306f6f9f0204 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3625,6 +3625,7 @@ static void intel_enable_ddi_dp(struct intel_encoder *encoder,
> intel_edp_backlight_on(crtc_state, conn_state);
> intel_psr_enable(intel_dp, crtc_state);
> intel_dp_vsc_enable(intel_dp, crtc_state, conn_state);
> + intel_dp_hdr_metadata_enable(intel_dp, crtc_state, conn_state);
> intel_edp_drrs_enable(intel_dp, crtc_state);
>
> if (crtc_state->has_audio)
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 7fe22b37474d..abbf1d5c54c4 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -4599,6 +4599,83 @@ intel_dp_setup_vsc_sdp(struct intel_dp *intel_dp,
> crtc_state, DP_SDP_VSC, &vsc_sdp, sizeof(vsc_sdp));
> }
>
> +static void
> +intel_dp_setup_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state,
> + const struct drm_connector_state *conn_state)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
> + struct dp_sdp infoframe_sdp = {};
> + struct hdmi_drm_infoframe drm_infoframe = {};
> + const int infoframe_size = HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE;
> + unsigned char buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE];
> + ssize_t len;
> + int ret;
> +
> + ret = drm_hdmi_infoframe_set_hdr_metadata(&drm_infoframe, conn_state);
> + if (ret) {
> + DRM_DEBUG_KMS("couldn't set HDR metadata in infoframe\n");
> + return;
> + }
> +
> + len = hdmi_drm_infoframe_pack_only(&drm_infoframe, buf, sizeof(buf));
> + if (len < 0) {
> + DRM_DEBUG_KMS("buffer size is smaller than hdr metadata infoframe\n");
> + return;
> + }
> +
> + if (len != infoframe_size) {
> + DRM_DEBUG_KMS("wrong static hdr metadata size\n");
> + return;
> + }
> +
> + /*
> + * Set up the infoframe sdp packet for HDR static metadata.
> + * Prepare VSC Header for SU as per DP 1.4a spec,
> + * Table 2-100 and Table 2-101
> + */
> +
> + /* Packet ID, 00h for non-Audio INFOFRAME */
> + infoframe_sdp.sdp_header.HB0 = 0;
> + /*
> + * Packet Type 80h + Non-audio INFOFRAME Type value
> + * HDMI_INFOFRAME_TYPE_DRM: 0x87,
> + */
> + infoframe_sdp.sdp_header.HB1 = drm_infoframe.type;
> + /*
> + * Least Significant Eight Bits of (Data Byte Count – 1)
> + * infoframe_size - 1,
> + */
> + infoframe_sdp.sdp_header.HB2 = 0x1D;
> + /* INFOFRAME SDP Version Number */
> + infoframe_sdp.sdp_header.HB3 = (0x13 << 2);
> + /* CTA Header Byte 2 (INFOFRAME Version Number) */
> + infoframe_sdp.db[0] = drm_infoframe.version;
> + /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */
> + infoframe_sdp.db[1] = drm_infoframe.length;
> + /*
> + * Copy HDMI_DRM_INFOFRAME_SIZE size from a buffer after
> + * HDMI_INFOFRAME_HEADER_SIZE
> + */
> + memcpy(&infoframe_sdp.db[2], &buf[HDMI_INFOFRAME_HEADER_SIZE],
> + HDMI_DRM_INFOFRAME_SIZE);
> +
> + if (INTEL_GEN(dev_priv) >= 11)
> + intel_dig_port->write_infoframe(&intel_dig_port->base,
> + crtc_state,
> + HDMI_PACKET_TYPE_GAMUT_METADATA,
> + &infoframe_sdp,
> + VIDEO_DIP_GMP_DATA_SIZE);
> + else
> + /* Prior to GEN11, Header size: 4 bytes, Data size: 28 bytes */
> + intel_dig_port->write_infoframe(&intel_dig_port->base,
> + crtc_state,
> + HDMI_PACKET_TYPE_GAMUT_METADATA,
> + &infoframe_sdp,
> + VIDEO_DIP_DATA_SIZE);
This looks suspicious. Why is this not just something like sizeof(sdp)?
> +}
> +
> void intel_dp_vsc_enable(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state)
> @@ -4609,6 +4686,18 @@ void intel_dp_vsc_enable(struct intel_dp *intel_dp,
> intel_dp_setup_vsc_sdp(intel_dp, crtc_state, conn_state);
> }
>
> +void intel_dp_hdr_metadata_enable(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state,
> + const struct drm_connector_state *conn_state)
> +{
> + if (!conn_state->hdr_output_metadata)
> + return;
> +
> + intel_dp_setup_hdr_metadata_infoframe_sdp(intel_dp,
> + crtc_state,
> + conn_state);
> +}
> +
> static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp)
> {
> int status = 0;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index 87883d0d5977..5613073d1dd5 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -116,6 +116,9 @@ bool intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state);
> void intel_dp_vsc_enable(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state);
> +void intel_dp_hdr_metadata_enable(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state,
> + const struct drm_connector_state *conn_state);
> bool intel_digital_port_connected(struct intel_encoder *encoder);
>
> static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
> --
> 2.23.0
--
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-09-18 14:13 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-16 7:11 [PATCH v8 0/7] drm/i915/dp: Support for DP HDR outputs Gwan-gyeong Mun
2019-09-16 7:11 ` [PATCH v8 1/7] drm/i915/dp: Extend program of VSC Header and DB for Colorimetry Format Gwan-gyeong Mun
2019-09-16 7:11 ` [PATCH v8 2/7] drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA Gwan-gyeong Mun
2019-09-18 14:15 ` Ville Syrjälä
2019-09-19 19:49 ` Mun, Gwan-gyeong
2019-09-16 7:11 ` [PATCH v8 3/7] drm: Add DisplayPort colorspace property Gwan-gyeong Mun
2019-09-18 14:08 ` Ville Syrjälä
2019-09-19 19:51 ` Mun, Gwan-gyeong
2019-09-16 7:11 ` [PATCH v8 4/7] drm/i915/dp: Attach " Gwan-gyeong Mun
2019-09-16 7:11 ` [PATCH v8 5/7] drm/i915: Add new GMP register size for GEN11 Gwan-gyeong Mun
2019-09-16 7:11 ` [PATCH v8 6/7] drm/i915/dp: Program an Infoframe SDP Header and DB for HDR Static Metadata Gwan-gyeong Mun
2019-09-18 14:13 ` Ville Syrjälä [this message]
2019-09-19 19:52 ` Mun, Gwan-gyeong
2019-09-16 7:11 ` [PATCH v8 7/7] drm/i915/dp: Attach HDR metadata property to DP connector Gwan-gyeong Mun
2019-09-16 9:42 ` ✓ Fi.CI.BAT: success for drm/i915/dp: Support for DP HDR outputs (rev8) Patchwork
2019-09-16 11:55 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190918141343.GL1208@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gwan-gyeong.mun@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.saarinen@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.