All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Mark Brown <broonie@kernel.org>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>
Subject: [PATCH] spi: atmel: Remove AVR32 leftover
Date: Thu, 19 Sep 2019 17:40:34 +0200	[thread overview]
Message-ID: <20190919154034.7489-1-gregory.clement@bootlin.com> (raw)

AV32 support has been from the kernel a few release ago, but there was
still some specific macro for this architecture in this driver. Lets
remove it.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/spi/spi-atmel.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index bb94f5927819..de1e1861a70c 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -222,37 +222,13 @@
 	  | SPI_BF(name, value))
 
 /* Register access macros */
-#ifdef CONFIG_AVR32
-#define spi_readl(port, reg) \
-	__raw_readl((port)->regs + SPI_##reg)
-#define spi_writel(port, reg, value) \
-	__raw_writel((value), (port)->regs + SPI_##reg)
-
-#define spi_readw(port, reg) \
-	__raw_readw((port)->regs + SPI_##reg)
-#define spi_writew(port, reg, value) \
-	__raw_writew((value), (port)->regs + SPI_##reg)
-
-#define spi_readb(port, reg) \
-	__raw_readb((port)->regs + SPI_##reg)
-#define spi_writeb(port, reg, value) \
-	__raw_writeb((value), (port)->regs + SPI_##reg)
-#else
 #define spi_readl(port, reg) \
 	readl_relaxed((port)->regs + SPI_##reg)
 #define spi_writel(port, reg, value) \
 	writel_relaxed((value), (port)->regs + SPI_##reg)
-
-#define spi_readw(port, reg) \
-	readw_relaxed((port)->regs + SPI_##reg)
 #define spi_writew(port, reg, value) \
 	writew_relaxed((value), (port)->regs + SPI_##reg)
 
-#define spi_readb(port, reg) \
-	readb_relaxed((port)->regs + SPI_##reg)
-#define spi_writeb(port, reg, value) \
-	writeb_relaxed((value), (port)->regs + SPI_##reg)
-#endif
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
  * cache operations; better heuristics consider wordsize and bitrate.
  */
-- 
2.23.0

WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Mark Brown <broonie@kernel.org>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	Gregory CLEMENT <gregory.clement@bootlin.com>
Subject: [PATCH] spi: atmel: Remove AVR32 leftover
Date: Thu, 19 Sep 2019 17:40:34 +0200	[thread overview]
Message-ID: <20190919154034.7489-1-gregory.clement@bootlin.com> (raw)

AV32 support has been from the kernel a few release ago, but there was
still some specific macro for this architecture in this driver. Lets
remove it.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/spi/spi-atmel.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index bb94f5927819..de1e1861a70c 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -222,37 +222,13 @@
 	  | SPI_BF(name, value))
 
 /* Register access macros */
-#ifdef CONFIG_AVR32
-#define spi_readl(port, reg) \
-	__raw_readl((port)->regs + SPI_##reg)
-#define spi_writel(port, reg, value) \
-	__raw_writel((value), (port)->regs + SPI_##reg)
-
-#define spi_readw(port, reg) \
-	__raw_readw((port)->regs + SPI_##reg)
-#define spi_writew(port, reg, value) \
-	__raw_writew((value), (port)->regs + SPI_##reg)
-
-#define spi_readb(port, reg) \
-	__raw_readb((port)->regs + SPI_##reg)
-#define spi_writeb(port, reg, value) \
-	__raw_writeb((value), (port)->regs + SPI_##reg)
-#else
 #define spi_readl(port, reg) \
 	readl_relaxed((port)->regs + SPI_##reg)
 #define spi_writel(port, reg, value) \
 	writel_relaxed((value), (port)->regs + SPI_##reg)
-
-#define spi_readw(port, reg) \
-	readw_relaxed((port)->regs + SPI_##reg)
 #define spi_writew(port, reg, value) \
 	writew_relaxed((value), (port)->regs + SPI_##reg)
 
-#define spi_readb(port, reg) \
-	readb_relaxed((port)->regs + SPI_##reg)
-#define spi_writeb(port, reg, value) \
-	writeb_relaxed((value), (port)->regs + SPI_##reg)
-#endif
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
  * cache operations; better heuristics consider wordsize and bitrate.
  */
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-09-19 15:40 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-19 15:40 Gregory CLEMENT [this message]
2019-09-19 15:40 ` [PATCH] spi: atmel: Remove AVR32 leftover Gregory CLEMENT
2019-09-19 17:24 ` Alexandre Belloni
2019-09-19 17:24   ` Alexandre Belloni
2019-09-19 19:13   ` Thomas Petazzoni
2019-09-19 19:13     ` Thomas Petazzoni
2019-10-01 11:41 ` Applied "spi: atmel: Remove AVR32 leftover" to the spi tree Mark Brown
2019-10-01 11:41   ` Mark Brown
2019-10-01 11:41   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190919154034.7489-1-gregory.clement@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.