From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
Dick Kennedy <dick.kennedy@broadcom.com>
Subject: [PATCH 01/20] lpfc: Fix pt2pt discovery on SLI3 HBAs
Date: Sat, 21 Sep 2019 20:58:47 -0700 [thread overview]
Message-ID: <20190922035906.10977-2-jsmart2021@gmail.com> (raw)
In-Reply-To: <20190922035906.10977-1-jsmart2021@gmail.com>
After exchanging PLOGI on an SLI-3 adapter, the PRLI
exchange failed. Link trace showed the port was
assigned a non-zero n_port_id, but didn't use the address
on the PRLI. The assigned address is set on the port
by the CONFIG_LINK mailbox command. The driver responded
to the PRLI before the mailbox command completed. Thus the
PRLI response used the old n_port_id.
Defer the PRLI response until CONFIG_LINK completes.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 141 ++++++++++++++++++++++++++++++-------
1 file changed, 115 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index f4b879d25fe9..4e96d28cba39 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -279,6 +279,55 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
}
+/* lpfc_defer_pt2pt_acc - Complete SLI3 pt2pt processing on link up
+ * @phba: pointer to lpfc hba data structure.
+ * @link_mbox: pointer to CONFIG_LINK mailbox object
+ *
+ * This routine is only called if we are SLI3, direct connect pt2pt
+ * mode and the remote NPort issues the PLOGI after link up.
+ */
+void
+lpfc_defer_pt2pt_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *link_mbox)
+{
+ LPFC_MBOXQ_t *login_mbox;
+ MAILBOX_t *mb = &link_mbox->u.mb;
+ struct lpfc_iocbq *save_iocb;
+ struct lpfc_nodelist *ndlp;
+ int rc;
+
+ ndlp = link_mbox->ctx_ndlp;
+ login_mbox = link_mbox->context3;
+ save_iocb = login_mbox->context3;
+ link_mbox->context3 = NULL;
+ login_mbox->context3 = NULL;
+
+ /* Check for CONFIG_LINK error */
+ if (mb->mbxStatus) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "4575 CONFIG_LINK fails pt2pt discovery: %x\n",
+ mb->mbxStatus);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
+ mempool_free(link_mbox, phba->mbox_mem_pool);
+ lpfc_sli_release_iocbq(phba, save_iocb);
+ return;
+ }
+
+ /* Now that CONFIG_LINK completed, and our SID is configured,
+ * we can now proceed with sending the PLOGI ACC.
+ */
+ rc = lpfc_els_rsp_acc(link_mbox->vport, ELS_CMD_PLOGI,
+ save_iocb, ndlp, login_mbox);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "4576 PLOGI ACC fails pt2pt discovery: %x\n",
+ rc);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
+ }
+
+ mempool_free(link_mbox, phba->mbox_mem_pool);
+ lpfc_sli_release_iocbq(phba, save_iocb);
+}
+
static int
lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct lpfc_iocbq *cmdiocb)
@@ -291,10 +340,12 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
IOCB_t *icmd;
struct serv_parm *sp;
uint32_t ed_tov;
- LPFC_MBOXQ_t *mbox;
+ LPFC_MBOXQ_t *link_mbox;
+ LPFC_MBOXQ_t *login_mbox;
+ struct lpfc_iocbq *save_iocb;
struct ls_rjt stat;
uint32_t vid, flag;
- int rc;
+ int rc, defer_acc;
memset(&stat, 0, sizeof (struct ls_rjt));
pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
@@ -343,6 +394,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
else
ndlp->nlp_fcp_info |= CLASS3;
+ defer_acc = 0;
ndlp->nlp_class_sup = 0;
if (sp->cls1.classValid)
ndlp->nlp_class_sup |= FC_COS_CLASS1;
@@ -354,7 +406,6 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_class_sup |= FC_COS_CLASS4;
ndlp->nlp_maxframe =
((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) | sp->cmn.bbRcvSizeLsb;
-
/* if already logged in, do implicit logout */
switch (ndlp->nlp_state) {
case NLP_STE_NPR_NODE:
@@ -396,6 +447,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+ login_mbox = NULL;
+ link_mbox = NULL;
+ save_iocb = NULL;
+
/* Check for Nport to NPort pt2pt protocol */
if ((vport->fc_flag & FC_PT2PT) &&
!(vport->fc_flag & FC_PT2PT_PLOGI)) {
@@ -423,17 +478,22 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (phba->sli_rev == LPFC_SLI_REV4)
lpfc_issue_reg_vfi(vport);
else {
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (mbox == NULL)
+ defer_acc = 1;
+ link_mbox = mempool_alloc(phba->mbox_mem_pool,
+ GFP_KERNEL);
+ if (!link_mbox)
goto out;
- lpfc_config_link(phba, mbox);
- mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- mbox->vport = vport;
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- mempool_free(mbox, phba->mbox_mem_pool);
+ lpfc_config_link(phba, link_mbox);
+ link_mbox->mbox_cmpl = lpfc_defer_pt2pt_acc;
+ link_mbox->vport = vport;
+ link_mbox->ctx_ndlp = ndlp;
+
+ save_iocb = lpfc_sli_get_iocbq(phba);
+ if (!save_iocb)
goto out;
- }
+ /* Save info from cmd IOCB used in rsp */
+ memcpy((uint8_t *)save_iocb, (uint8_t *)cmdiocb,
+ sizeof(struct lpfc_iocbq));
}
lpfc_can_disctmo(vport);
@@ -448,8 +508,8 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_flag |= NLP_SUPPRESS_RSP;
}
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox)
+ login_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!login_mbox)
goto out;
/* Registering an existing RPI behaves differently for SLI3 vs SLI4 */
@@ -457,21 +517,19 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
lpfc_unreg_rpi(vport, ndlp);
rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
- (uint8_t *) sp, mbox, ndlp->nlp_rpi);
- if (rc) {
- mempool_free(mbox, phba->mbox_mem_pool);
+ (uint8_t *)sp, login_mbox, ndlp->nlp_rpi);
+ if (rc)
goto out;
- }
/* ACC PLOGI rsp command needs to execute first,
- * queue this mbox command to be processed later.
+ * queue this login_mbox command to be processed later.
*/
- mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login;
+ login_mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login;
/*
- * mbox->ctx_ndlp = lpfc_nlp_get(ndlp) deferred until mailbox
+ * login_mbox->ctx_ndlp = lpfc_nlp_get(ndlp) deferred until mailbox
* command issued in lpfc_cmpl_els_acc().
*/
- mbox->vport = vport;
+ login_mbox->vport = vport;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI);
spin_unlock_irq(shost->host_lock);
@@ -504,16 +562,47 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD;
stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
- ndlp, mbox);
+ ndlp, login_mbox);
if (rc)
- mempool_free(mbox, phba->mbox_mem_pool);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
return 1;
}
- rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+ if (defer_acc) {
+ /* So the order here should be:
+ * Issue CONFIG_LINK mbox
+ * CONFIG_LINK cmpl
+ * Issue PLOGI ACC
+ * PLOGI ACC cmpl
+ * Issue REG_LOGIN mbox
+ */
+
+ /* Save the REG_LOGIN mbox for and rcv IOCB copy later */
+ link_mbox->context3 = login_mbox;
+ login_mbox->context3 = save_iocb;
+
+ /* Start the ball rolling by issuing CONFIG_LINK here */
+ rc = lpfc_sli_issue_mbox(phba, link_mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED)
+ goto out;
+ return 1;
+ }
+
+ rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, login_mbox);
if (rc)
- mempool_free(mbox, phba->mbox_mem_pool);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
return 1;
out:
+ if (defer_acc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "4577 pt2pt discovery failure: %p %p %p\n",
+ save_iocb, link_mbox, login_mbox);
+ if (save_iocb)
+ lpfc_sli_release_iocbq(phba, save_iocb);
+ if (link_mbox)
+ mempool_free(link_mbox, phba->mbox_mem_pool);
+ if (login_mbox)
+ mempool_free(login_mbox, phba->mbox_mem_pool);
+
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_OUT_OF_RESOURCE;
lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, NULL);
--
2.13.7
next prev parent reply other threads:[~2019-09-22 3:59 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-22 3:58 [PATCH 00/20] lpfc: Update lpfc to revision 12.4.0.1 James Smart
2019-09-22 3:58 ` James Smart [this message]
2019-09-22 3:58 ` [PATCH 02/20] lpfc: Fix premature re-enabling of interrupts in lpfc_sli_host_down James Smart
2019-09-22 3:58 ` [PATCH 03/20] lpfc: Fix miss of register read failure check James Smart
2019-09-22 3:58 ` [PATCH 04/20] lpfc: Fix NVME io abort failures causing hangs James Smart
2019-09-22 3:58 ` [PATCH 05/20] lpfc: Fix rpi release when deleting vport James Smart
2019-09-22 3:58 ` [PATCH 06/20] lpfc: Fix device recovery errors after PLOGI failures James Smart
2019-09-22 3:58 ` [PATCH 07/20] lpfc: Fix locking on mailbox command completion James Smart
2019-09-22 3:58 ` [PATCH 08/20] lpfc: Fix GPF on scsi " James Smart
2019-09-22 3:58 ` [PATCH 09/20] lpfc: Fix discovery failures when target device connectivity bounces James Smart
2019-09-22 3:58 ` [PATCH 10/20] lpfc: Fix NVMe ABTS in response to receiving an ABTS James Smart
2019-09-22 3:58 ` [PATCH 11/20] lpfc: Fix coverity errors on NULL pointer checks James Smart
2019-09-22 3:58 ` [PATCH 12/20] lpfc: Fix host hang at boot or slow boot James Smart
2019-09-22 3:58 ` [PATCH 13/20] lpfc: Fix list corruption in lpfc_sli_get_iocbq James Smart
2019-09-22 3:59 ` [PATCH 14/20] lpfc: Fix spinlock_irq issues in lpfc_els_flush_cmd() James Smart
2019-09-22 3:59 ` [PATCH 15/20] lpfc: Fix hdwq sgl locks and irq handling James Smart
2019-09-22 3:59 ` [PATCH 16/20] lpfc: Fix list corruption detected in lpfc_put_sgl_per_hdwq James Smart
2019-09-22 3:59 ` [PATCH 17/20] lpfc: Update async event logging James Smart
2019-09-22 3:59 ` [PATCH 18/20] lpfc: Complete removal of FCoE T10diff support on SLI-4 adapters James Smart
2019-09-22 3:59 ` [PATCH 19/20] lpfc: cleanup: remove unused fcp_txcmlpq_cnt James Smart
2019-09-22 3:59 ` [PATCH 20/20] lpfc: Update lpfc version to 12.4.0.1 James Smart
2019-10-01 2:07 ` [PATCH 00/20] lpfc: Update lpfc to revision 12.4.0.1 Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190922035906.10977-2-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dick.kennedy@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.