From: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com>
To: johan@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, peter_hong@fintek.com.tw,
"Ji-Ze Hong (Peter Hong)" <hpeter+linux_kernel@gmail.com>
Subject: [PATCH V2 0/7] Add Fintek F81534A series usb-to-serial driver
Date: Mon, 23 Sep 2019 10:24:42 +0800 [thread overview]
Message-ID: <20190923022449.10952-1-hpeter+linux_kernel@gmail.com> (raw)
The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device
and the serial port is default disabled when plugin computer.
The part number is a bit same with F81532/534, but F81534A series UART
core is enhanced from F81232, not F81532/534.
The IC is contains devices as following:
1. HUB (all devices is connected with this hub)
2. GPIO/Control device. (enable serial port and control all GPIOs)
3. serial port 1 to x (2/4/8/12)
It's most same with F81232, the UART device is difference as follow:
1. TX/RX bulk size is 128/512bytes
2. RX bulk layout change:
F81232: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]...
F81534A:[LEN][Data.....][LSR]
We'll try to do some code refacting before add F81534A series.
Ji-Ze Hong (Peter Hong) (7):
USB: serial: f81232: Extract LSR handler
USB: serial: f81232: Add tx_empty function
USB: serial: f81232: Use devm_kzalloc
USB: serial: f81232: Add F81534A support
USB: serial: f81232: Set F81534A serial port with RS232 mode
USB: serial: f81232: Add generator for F81534A
USB: serial: f81232: Add gpiolib to GPIO device
drivers/usb/serial/f81232.c | 604 ++++++++++++++++++++++++++++++++++--
1 file changed, 570 insertions(+), 34 deletions(-)
--
2.17.1
next reply other threads:[~2019-09-23 2:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-23 2:24 Ji-Ze Hong (Peter Hong) [this message]
2019-09-23 2:24 ` [PATCH V2 1/7] USB: serial: f81232: Extract LSR handler Ji-Ze Hong (Peter Hong)
2019-10-23 9:23 ` Johan Hovold
2019-09-23 2:24 ` [PATCH V2 2/7] USB: serial: f81232: Add tx_empty function Ji-Ze Hong (Peter Hong)
2019-10-23 9:15 ` Johan Hovold
2019-09-23 2:24 ` [PATCH V2 3/7] USB: serial: f81232: Use devm_kzalloc Ji-Ze Hong (Peter Hong)
2019-09-23 2:24 ` [PATCH V2 4/7] USB: serial: f81232: Add F81534A support Ji-Ze Hong (Peter Hong)
2019-10-23 9:59 ` Johan Hovold
2019-09-23 2:24 ` [PATCH V2 5/7] USB: serial: f81232: Set F81534A serial port with RS232 mode Ji-Ze Hong (Peter Hong)
2019-10-23 11:53 ` Johan Hovold
2019-10-24 8:52 ` Ji-Ze Hong (Peter Hong)
2020-01-08 14:35 ` Johan Hovold
[not found] ` <3c79f786-de34-550e-3964-d7fb334f6d56@gmail.com>
2020-01-13 15:17 ` Johan Hovold
2020-01-14 1:08 ` Ji-Ze Hong (Peter Hong)
2019-09-23 2:24 ` [PATCH V2 6/7] USB: serial: f81232: Add generator for F81534A Ji-Ze Hong (Peter Hong)
2019-10-23 12:05 ` Johan Hovold
2019-10-23 12:25 ` Johan Hovold
2019-09-23 2:24 ` [PATCH V2 7/7] USB: serial: f81232: Add gpiolib to GPIO device Ji-Ze Hong (Peter Hong)
2019-10-23 12:22 ` Johan Hovold
2019-10-30 2:00 ` Ji-Ze Hong (Peter Hong)
2020-01-08 14:46 ` Johan Hovold
2020-01-09 2:43 ` Ji-Ze Hong (Peter Hong)
2020-01-13 15:24 ` Johan Hovold
2019-10-23 9:21 ` [PATCH V2 0/7] Add Fintek F81534A series usb-to-serial driver Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190923022449.10952-1-hpeter+linux_kernel@gmail.com \
--to=hpeter@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hpeter+linux_kernel@gmail.com \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter_hong@fintek.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.