From: Krzysztof Kozlowski <krzk@kernel.org>
To: Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Johan Hovold <johan@kernel.org>, Jiri Kosina <trivial@kernel.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH trivial] usb: Fix Kconfig indentation
Date: Mon, 23 Sep 2019 17:49:56 +0200 [thread overview]
Message-ID: <20190923154956.6868-1-krzk@kernel.org> (raw)
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/usb/dwc3/Kconfig | 4 +-
drivers/usb/gadget/legacy/Kconfig | 20 ++++-----
drivers/usb/gadget/udc/Kconfig | 2 +-
drivers/usb/host/Kconfig | 68 +++++++++++++++---------------
drivers/usb/misc/Kconfig | 8 ++--
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
drivers/usb/serial/Kconfig | 44 +++++++++----------
7 files changed, 74 insertions(+), 74 deletions(-)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 89abc6078703..cc431376fcd0 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -103,7 +103,7 @@ config USB_DWC3_MESON_G12A
default USB_DWC3
select USB_ROLE_SWITCH
help
- Support USB2/3 functionality in Amlogic G12A platforms.
+ Support USB2/3 functionality in Amlogic G12A platforms.
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_OF_SIMPLE
@@ -111,7 +111,7 @@ config USB_DWC3_OF_SIMPLE
depends on OF && COMMON_CLK
default USB_DWC3
help
- Support USB2/3 functionality in simple SoC integrations.
+ Support USB2/3 functionality in simple SoC integrations.
Currently supports Xilinx and Qualcomm DWC USB3 IP.
Say 'Y' or 'M' if you have one such device.
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 69ff7f8c86f5..38eaa9417b38 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -154,16 +154,16 @@ config USB_ETH_EEM
select USB_LIBCOMPOSITE
select USB_F_EEM
help
- CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
- and therefore can be supported by more hardware. Technically ECM and
- EEM are designed for different applications. The ECM model extends
- the network interface to the target (e.g. a USB cable modem), and the
- EEM model is for mobile devices to communicate with hosts using
- ethernet over USB. For Linux gadgets, however, the interface with
- the host is the same (a usbX device), so the differences are minimal.
-
- If you say "y" here, the Ethernet gadget driver will use the EEM
- protocol rather than ECM. If unsure, say "n".
+ CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+ and therefore can be supported by more hardware. Technically ECM and
+ EEM are designed for different applications. The ECM model extends
+ the network interface to the target (e.g. a USB cable modem), and the
+ EEM model is for mobile devices to communicate with hosts using
+ ethernet over USB. For Linux gadgets, however, the interface with
+ the host is the same (a usbX device), so the differences are minimal.
+
+ If you say "y" here, the Ethernet gadget driver will use the EEM
+ protocol rather than ECM. If unsure, say "n".
config USB_G_NCM
tristate "Network Control Model (NCM) support"
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index d7e611645533..485c92ef888a 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -123,7 +123,7 @@ config USB_GR_UDC
tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
depends on HAS_DMA
help
- Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
+ Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
VHDL IP core library.
config USB_OMAP
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 79b2e79dddd0..d6164ede63d3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -220,12 +220,12 @@ config USB_EHCI_HCD_ORION
Marvell PXA/MMP USB controller" for those.
config USB_EHCI_HCD_SPEAR
- tristate "Support for ST SPEAr on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && PLAT_SPEAR
- default y
- ---help---
- Enables support for the on-chip EHCI controller on
- ST SPEAr chips.
+ tristate "Support for ST SPEAr on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_SPEAR
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ ST SPEAr chips.
config USB_EHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip EHCI USB controller"
@@ -237,12 +237,12 @@ config USB_EHCI_HCD_STI
STMicroelectronics consumer electronics SoC's.
config USB_EHCI_HCD_AT91
- tristate "Support for Atmel on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && ARCH_AT91
- default y
- ---help---
- Enables support for the on-chip EHCI controller on
- Atmel chips.
+ tristate "Support for Atmel on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && ARCH_AT91
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ Atmel chips.
config USB_EHCI_TEGRA
tristate "NVIDIA Tegra HCD support"
@@ -250,8 +250,8 @@ config USB_EHCI_TEGRA
select USB_EHCI_ROOT_HUB_TT
select USB_TEGRA_PHY
help
- This driver enables support for the internal USB Host Controllers
- found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
+ This driver enables support for the internal USB Host Controllers
+ found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
@@ -409,12 +409,12 @@ config USB_OHCI_HCD_OMAP1
Enables support for the OHCI controller on OMAP1/2 chips.
config USB_OHCI_HCD_SPEAR
- tristate "Support for ST SPEAr on-chip OHCI USB controller"
- depends on USB_OHCI_HCD && PLAT_SPEAR
- default y
- ---help---
- Enables support for the on-chip OHCI controller on
- ST SPEAr chips.
+ tristate "Support for ST SPEAr on-chip OHCI USB controller"
+ depends on USB_OHCI_HCD && PLAT_SPEAR
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ ST SPEAr chips.
config USB_OHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip OHCI USB controller"
@@ -426,12 +426,12 @@ config USB_OHCI_HCD_STI
STMicroelectronics consumer electronics SoC's.
config USB_OHCI_HCD_S3C2410
- tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
- depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
- default y
- ---help---
- Enables support for the on-chip OHCI controller on
- S3C24xx/S3C64xx chips.
+ tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
+ depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ S3C24xx/S3C64xx chips.
config USB_OHCI_HCD_LPC32XX
tristate "Support for LPC on-chip OHCI USB controller"
@@ -440,8 +440,8 @@ config USB_OHCI_HCD_LPC32XX
depends on USB_ISP1301
default y
---help---
- Enables support for the on-chip OHCI controller on
- NXP chips.
+ Enables support for the on-chip OHCI controller on
+ NXP chips.
config USB_OHCI_HCD_PXA27X
tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
@@ -456,8 +456,8 @@ config USB_OHCI_HCD_AT91
depends on USB_OHCI_HCD && ARCH_AT91 && OF
default y
---help---
- Enables support for the on-chip OHCI controller on
- Atmel chips.
+ Enables support for the on-chip OHCI controller on
+ Atmel chips.
config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
@@ -716,11 +716,11 @@ config USB_IMX21_HCD
tristate "i.MX21 HCD support"
depends on ARM && ARCH_MXC
help
- This driver enables support for the on-chip USB host in the
- i.MX21 processor.
+ This driver enables support for the on-chip USB host in the
+ i.MX21 processor.
- To compile this driver as a module, choose M here: the
- module will be called "imx21-hcd".
+ To compile this driver as a module, choose M here: the
+ module will be called "imx21-hcd".
config USB_HCD_BCMA
tristate "BCMA usb host driver"
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index bdae62b2ffe0..664d27bb6086 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -191,8 +191,8 @@ config USB_TEST
including sample test device firmware and "how to use it".
config USB_EHSET_TEST_FIXTURE
- tristate "USB EHSET Test Fixture driver"
- help
+ tristate "USB EHSET Test Fixture driver"
+ help
Say Y here if you want to support the special test fixture device
used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
@@ -247,13 +247,13 @@ config USB_HSIC_USB3503
depends on I2C
select REGMAP_I2C
help
- This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+ This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
config USB_HSIC_USB4604
tristate "USB4604 HSIC to USB20 Driver"
depends on I2C
help
- This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
+ This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
config USB_LINK_LAYER_TEST
tristate "USB Link Layer Test driver"
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 9b632ab24f03..c16121276a21 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -4,7 +4,7 @@ config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
select FONT_SUPPORT if USB_SISUSBVGA_CON
- ---help---
+ ---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 67279c6bce33..0a8c16a8cda2 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -271,17 +271,17 @@ config USB_SERIAL_F8153X
config USB_SERIAL_GARMIN
tristate "USB Garmin GPS driver"
help
- Say Y here if you want to connect to your Garmin GPS.
- Should work with most Garmin GPS devices which have a native USB port.
+ Say Y here if you want to connect to your Garmin GPS.
+ Should work with most Garmin GPS devices which have a native USB port.
- See <http://sourceforge.net/projects/garmin-gps> for the latest
- version of the driver.
+ See <http://sourceforge.net/projects/garmin-gps> for the latest
+ version of the driver.
- To compile this driver as a module, choose M here: the
- module will be called garmin_gps.
+ To compile this driver as a module, choose M here: the
+ module will be called garmin_gps.
config USB_SERIAL_IPW
- tristate "USB IPWireless (3G UMTS TDD) Driver"
+ tristate "USB IPWireless (3G UMTS TDD) Driver"
select USB_SERIAL_WWAN
help
Say Y here if you want to use a IPWireless USB modem such as
@@ -341,20 +341,20 @@ config USB_SERIAL_KLSI
module will be called kl5kusb105.
config USB_SERIAL_KOBIL_SCT
- tristate "USB KOBIL chipcard reader"
- ---help---
- Say Y here if you want to use one of the following KOBIL USB chipcard
- readers:
-
- - USB TWIN
- - KAAN Standard Plus
- - KAAN SIM
- - SecOVID Reader Plus
- - B1 Professional
- - KAAN Professional
-
- Note that you need a current CT-API.
- To compile this driver as a module, choose M here: the
+ tristate "USB KOBIL chipcard reader"
+ ---help---
+ Say Y here if you want to use one of the following KOBIL USB chipcard
+ readers:
+
+ - USB TWIN
+ - KAAN Standard Plus
+ - KAAN SIM
+ - SecOVID Reader Plus
+ - B1 Professional
+ - KAAN Professional
+
+ Note that you need a current CT-API.
+ To compile this driver as a module, choose M here: the
module will be called kobil_sct.
config USB_SERIAL_MCT_U232
@@ -458,7 +458,7 @@ config USB_SERIAL_OTI6858
tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
help
Say Y here if you want to use the OTi-6858 single port USB to serial
- converter device.
+ converter device.
To compile this driver as a module, choose M here: the
module will be called oti6858.
--
2.17.1
next reply other threads:[~2019-09-23 15:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-23 15:49 Krzysztof Kozlowski [this message]
2019-09-25 8:01 ` [PATCH trivial] usb: Fix Kconfig indentation Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190923154956.6868-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.