All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcin Baran <marcinx.baran@intel.com>
To: dev@dpdk.org, bruce.richardson@intel.com
Cc: Marcin Baran <marcinx.baran@intel.com>,
	Pawel Modrak <pawelx.modrak@intel.com>
Subject: [dpdk-dev] [PATCH v6 3/6] examples/ioat: add rawdev copy mode support
Date: Mon, 30 Sep 2019 09:50:31 +0200	[thread overview]
Message-ID: <20190930075034.2000-4-marcinx.baran@intel.com> (raw)
In-Reply-To: <20190930075034.2000-1-marcinx.baran@intel.com>

Added support for copying packets using
rawdev device. Each port's Rx queue is
assigned DMA channel for copy.

Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
---
 examples/ioat/ioatfwd.c | 117 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 115 insertions(+), 2 deletions(-)

diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 2a4da948a..a38b6700b 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -121,6 +121,50 @@ pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
 		rte_pktmbuf_mtod(src, char *), src->data_len);
 }
 
+static uint32_t
+ioat_enqueue_packets(struct rte_mbuf **pkts,
+	uint32_t nb_rx, uint16_t dev_id)
+{
+	int ret;
+	uint32_t i;
+	struct rte_mbuf *pkts_copy[MAX_PKT_BURST];
+
+	const uint64_t addr_offset = RTE_PTR_DIFF(pkts[0]->buf_addr,
+		&pkts[0]->rearm_data);
+
+	ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+		(void *)pkts_copy, nb_rx);
+
+	if (unlikely(ret < 0))
+		rte_exit(EXIT_FAILURE, "Unable to allocate memory.\n");
+
+	for (i = 0; i < nb_rx; i++) {
+		/* Perform data copy */
+		ret = rte_ioat_enqueue_copy(dev_id,
+			pkts[i]->buf_iova
+			- addr_offset,
+			pkts_copy[i]->buf_iova
+			- addr_offset,
+			rte_pktmbuf_data_len(pkts[i])
+			+ addr_offset,
+			(uintptr_t)pkts[i],
+			(uintptr_t)pkts_copy[i],
+			0 /* nofence */);
+
+		if (ret != 1)
+			break;
+	}
+
+	ret = i;
+	/* Free any not enqueued packets. */
+	rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts[i], nb_rx - i);
+	rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts_copy[i],
+		nb_rx - i);
+
+
+	return ret;
+}
+
 /* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. */
 static void
 ioat_rx_port(struct rxtx_port_config *rx_config)
@@ -138,6 +182,10 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
 
 		if (copy_mode == COPY_MODE_IOAT_NUM) {
 			/* Perform packet hardware copy */
+			nb_enq = ioat_enqueue_packets(pkts_burst,
+				nb_rx, rx_config->ioat_ids[i]);
+			if (nb_enq > 0)
+				rte_ioat_do_copies(rx_config->ioat_ids[i]);
 		} else {
 			/* Perform packet software copy, free source packets */
 			int ret;
@@ -174,11 +222,15 @@ static void
 ioat_tx_port(struct rxtx_port_config *tx_config)
 {
 	uint32_t i, j, nb_dq = 0;
+	struct rte_mbuf *mbufs_src[MAX_PKT_BURST];
 	struct rte_mbuf *mbufs_dst[MAX_PKT_BURST];
 
 	for (i = 0; i < tx_config->nb_queues; i++) {
 		if (copy_mode == COPY_MODE_IOAT_NUM) {
 			/* Deque the mbufs from IOAT device. */
+			nb_dq = rte_ioat_completed_copies(
+				tx_config->ioat_ids[i], MAX_PKT_BURST,
+				(void *)mbufs_src, (void *)mbufs_dst);
 		} else {
 			/* Deque the mbufs from rx_to_tx_ring. */
 			nb_dq = rte_ring_dequeue_burst(
@@ -189,6 +241,10 @@ ioat_tx_port(struct rxtx_port_config *tx_config)
 		if (nb_dq == 0)
 			return;
 
+		if (copy_mode == COPY_MODE_IOAT_NUM)
+			rte_mempool_put_bulk(ioat_pktmbuf_pool,
+				(void *)mbufs_src, nb_dq);
+
 		/* Update macs if enabled */
 		if (mac_updating) {
 			for (j = 0; j < nb_dq; j++)
@@ -401,6 +457,52 @@ check_link_status(uint32_t port_mask)
 	return retval;
 }
 
+static void
+configure_rawdev_queue(uint32_t dev_id)
+{
+	struct rte_ioat_rawdev_config dev_config = { .ring_size = ring_size };
+	struct rte_rawdev_info info = { .dev_private = &dev_config };
+
+	if (rte_rawdev_configure(dev_id, &info) != 0) {
+		rte_exit(EXIT_FAILURE,
+			"Error with rte_rawdev_configure()\n");
+	}
+	if (rte_rawdev_start(dev_id) != 0) {
+		rte_exit(EXIT_FAILURE,
+			"Error with rte_rawdev_start()\n");
+	}
+}
+
+static void
+assign_rawdevs(void)
+{
+	uint16_t nb_rawdev = 0, rdev_id = 0;
+	uint32_t i, j;
+
+	for (i = 0; i < cfg.nb_ports; i++) {
+		for (j = 0; j < cfg.ports[i].nb_queues; j++) {
+			struct rte_rawdev_info rdev_info = { 0 };
+
+			do {
+				if (rdev_id == rte_rawdev_count())
+					goto end;
+				rte_rawdev_info_get(rdev_id++, &rdev_info);
+			} while (strcmp(rdev_info.driver_name,
+				IOAT_PMD_RAWDEV_NAME_STR) != 0);
+
+			cfg.ports[i].ioat_ids[j] = rdev_id - 1;
+			configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
+			++nb_rawdev;
+		}
+	}
+end:
+	if (nb_rawdev < cfg.nb_ports * cfg.ports[0].nb_queues)
+		rte_exit(EXIT_FAILURE,
+			"Not enough IOAT rawdevs (%u) for all queues (%u).\n",
+			nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
+	RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
+}
+
 static void
 assign_rings(void)
 {
@@ -597,18 +699,29 @@ main(int argc, char **argv)
 		rte_exit(EXIT_FAILURE,
 			"There should be at least one slave lcore.\n");
 
-	assign_rings();
+	if (copy_mode == COPY_MODE_IOAT_NUM)
+		assign_rawdevs();
+	else /* copy_mode == COPY_MODE_SW_NUM */
+		assign_rings();
 
 	start_forwarding_cores();
 
 	/* force_quit is true when we get here */
 	rte_eal_mp_wait_lcore();
 
+	uint32_t j;
 	for (i = 0; i < cfg.nb_ports; i++) {
 		printf("Closing port %d\n", cfg.ports[i].rxtx_port);
 		rte_eth_dev_stop(cfg.ports[i].rxtx_port);
 		rte_eth_dev_close(cfg.ports[i].rxtx_port);
-		rte_ring_free(cfg.ports[i].rx_to_tx_ring);
+		if (copy_mode == COPY_MODE_IOAT_NUM) {
+			for (j = 0; j < cfg.ports[i].nb_queues; j++) {
+				printf("Stopping rawdev %d\n",
+					cfg.ports[i].ioat_ids[j]);
+				rte_rawdev_stop(cfg.ports[i].ioat_ids[j]);
+			}
+		} else /* copy_mode == COPY_MODE_SW_NUM */
+			rte_ring_free(cfg.ports[i].rx_to_tx_ring);
 	}
 
 	printf("Bye...\n");
-- 
2.22.0.windows.1


  parent reply	other threads:[~2019-09-30  7:52 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-09  8:29 [dpdk-dev] [PATCH] examples/ioat: create sample app on ioat driver usage Marcin Baran
2019-09-09 13:12 ` Aaron Conole
2019-09-09 13:58   ` Bruce Richardson
2019-09-12  9:52 ` Bruce Richardson
2019-09-12 12:18   ` Baran, MarcinX
2019-09-13 14:39 ` [dpdk-dev] [PATCH v2 0/6] examples/ioat: " Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 1/6] examples/ioat: create " Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-13 14:39   ` [dpdk-dev] [PATCH v2 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-13 18:45   ` [dpdk-dev] [PATCH v2 0/6] examples/ioat: sample app on ioat driver usage Aaron Conole
2019-09-16  9:42     ` Baran, MarcinX
2019-09-19  9:19       ` Aaron Conole
2019-09-18  9:11   ` [dpdk-dev] [PATCH v3 " Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 1/6] examples/ioat: create " Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-18  9:11     ` [dpdk-dev] [PATCH v3 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-19  9:38     ` [dpdk-dev] [PATCH v4 0/6] examples/ioat: sample app on ioat driver usage Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 1/6] examples/ioat: create " Marcin Baran
2019-09-19 14:44         ` Bruce Richardson
2019-09-19 14:46           ` Baran, MarcinX
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-19  9:38       ` [dpdk-dev] [PATCH v4 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-20  7:37       ` [dpdk-dev] [PATCH v5 0/6] examples/ioat: sample app on ioat driver usage Marcin Baran
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 1/6] examples/ioat: create " Marcin Baran
2019-09-27  9:58           ` Bruce Richardson
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-27 10:01           ` Bruce Richardson
2019-09-27 14:01             ` Baran, MarcinX
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 3/6] examples/ioat: add rawdev copy mode support Marcin Baran
2019-09-27 10:05           ` Bruce Richardson
2019-09-27 14:03             ` Baran, MarcinX
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-27 10:08           ` Bruce Richardson
2019-09-27 14:03             ` Baran, MarcinX
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-27 10:12           ` Bruce Richardson
2019-09-27 14:04             ` Baran, MarcinX
2019-09-20  7:37         ` [dpdk-dev] [PATCH v5 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-09-27 10:36           ` Bruce Richardson
2019-09-27 14:14             ` Baran, MarcinX
2019-09-27 10:37           ` Bruce Richardson
2019-09-27 11:01           ` Bruce Richardson
2019-09-27 14:51             ` Baran, MarcinX
2019-09-27 15:00               ` Bruce Richardson
2019-09-27 15:16                 ` Baran, MarcinX
2019-09-27 13:22           ` Bruce Richardson
2019-09-27 15:13             ` Baran, MarcinX
2019-09-30  7:50         ` [dpdk-dev] [PATCH v6 0/6] examples/ioat: sample app on ioat driver usage Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 1/6] examples/ioat: create " Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 2/6] examples/ioat: add software copy support Marcin Baran
2019-09-30  7:50           ` Marcin Baran [this message]
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 4/6] examples/ioat: add two threads configuration Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 5/6] examples/ioat: add stats printing for each port Marcin Baran
2019-09-30  7:50           ` [dpdk-dev] [PATCH v6 6/6] doc/guides/: provide IOAT sample app guide Marcin Baran
2019-10-03  9:48           ` [dpdk-dev] [PATCH v6 0/6] examples/ioat: sample app on ioat driver usage Bruce Richardson
2019-10-04 17:16           ` Kevin Traynor
2019-10-07 11:10             ` Bruce Richardson
2019-10-07 11:08         ` [dpdk-dev] [PATCH v7 0/6] examples/ioat: sample app for ioat driver Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 1/6] examples/ioat: new " Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 2/6] examples/ioat: add software copy support Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 3/6] examples/ioat: add rawdev copy mode support Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 4/6] examples/ioat: add two threads configuration Bruce Richardson
2019-10-27 17:04             ` Thomas Monjalon
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 5/6] examples/ioat: add stats printing for each port Bruce Richardson
2019-10-07 11:08           ` [dpdk-dev] [PATCH v7 6/6] doc/guides/: provide IOAT sample app guide Bruce Richardson
2019-10-27 17:07             ` Thomas Monjalon
2019-10-27 17:07           ` [dpdk-dev] [PATCH v7 0/6] examples/ioat: sample app for ioat driver Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190930075034.2000-4-marcinx.baran@intel.com \
    --to=marcinx.baran@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=pawelx.modrak@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.