From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Darren Hart <dvhart@infradead.org>, Andy Shevchenko <andy@infradead.org>
Cc: Frank Seidel <frank@f-seidel.de>,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] platform/x86: hdaps: switch to using polled mode of input devices
Date: Tue, 1 Oct 2019 11:32:53 -0700 [thread overview]
Message-ID: <20191001183253.GA2344@dtor-ws> (raw)
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts hdaps driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/platform/x86/Kconfig | 1 -
drivers/platform/x86/hdaps.c | 38 +++++++++++++++++-------------------
2 files changed, 18 insertions(+), 21 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c703c78c59f3..8690e311f407 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -622,7 +622,6 @@ config THINKPAD_ACPI_HOTKEY_POLL
config SENSORS_HDAPS
tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
depends on INPUT
- select INPUT_POLLDEV
help
This driver provides support for the IBM Hard Drive Active Protection
System (hdaps), which provides an accelerometer and other misc. data.
diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c
index 3adcb0de0193..84d3d0af4e40 100644
--- a/drivers/platform/x86/hdaps.c
+++ b/drivers/platform/x86/hdaps.c
@@ -59,7 +59,7 @@
#define HDAPS_BOTH_AXES (HDAPS_X_AXIS | HDAPS_Y_AXIS)
static struct platform_device *pdev;
-static struct input_polled_dev *hdaps_idev;
+static struct input_dev *hdaps_idev;
static unsigned int hdaps_invert;
static u8 km_activity;
static int rest_x;
@@ -318,9 +318,8 @@ static void hdaps_calibrate(void)
__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y);
}
-static void hdaps_mousedev_poll(struct input_polled_dev *dev)
+static void hdaps_mousedev_poll(struct input_dev *input_dev)
{
- struct input_dev *input_dev = dev->input;
int x, y;
mutex_lock(&hdaps_mtx);
@@ -531,7 +530,6 @@ static const struct dmi_system_id hdaps_whitelist[] __initconst = {
static int __init hdaps_init(void)
{
- struct input_dev *idev;
int ret;
if (!dmi_check_system(hdaps_whitelist)) {
@@ -559,31 +557,32 @@ static int __init hdaps_init(void)
if (ret)
goto out_device;
- hdaps_idev = input_allocate_polled_device();
+ hdaps_idev = input_allocate_device();
if (!hdaps_idev) {
ret = -ENOMEM;
goto out_group;
}
- hdaps_idev->poll = hdaps_mousedev_poll;
- hdaps_idev->poll_interval = HDAPS_POLL_INTERVAL;
-
/* initial calibrate for the input device */
hdaps_calibrate();
/* initialize the input class */
- idev = hdaps_idev->input;
- idev->name = "hdaps";
- idev->phys = "isa1600/input0";
- idev->id.bustype = BUS_ISA;
- idev->dev.parent = &pdev->dev;
- idev->evbit[0] = BIT_MASK(EV_ABS);
- input_set_abs_params(idev, ABS_X,
+ hdaps_idev->name = "hdaps";
+ hdaps_idev->phys = "isa1600/input0";
+ hdaps_idev->id.bustype = BUS_ISA;
+ hdaps_idev->dev.parent = &pdev->dev;
+ input_set_abs_params(hdaps_idev, ABS_X,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
- input_set_abs_params(idev, ABS_Y,
+ input_set_abs_params(hdaps_idev, ABS_Y,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
- ret = input_register_polled_device(hdaps_idev);
+ ret = input_setup_polling(hdaps_idev, hdaps_mousedev_poll);
+ if (ret)
+ goto out_idev;
+
+ input_set_poll_interval(hdaps_idev, HDAPS_POLL_INTERVAL);
+
+ ret = input_register_device(hdaps_idev);
if (ret)
goto out_idev;
@@ -591,7 +590,7 @@ static int __init hdaps_init(void)
return 0;
out_idev:
- input_free_polled_device(hdaps_idev);
+ input_free_device(hdaps_idev);
out_group:
sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
out_device:
@@ -607,8 +606,7 @@ static int __init hdaps_init(void)
static void __exit hdaps_exit(void)
{
- input_unregister_polled_device(hdaps_idev);
- input_free_polled_device(hdaps_idev);
+ input_unregister_device(hdaps_idev);
sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
platform_device_unregister(pdev);
platform_driver_unregister(&hdaps_driver);
--
2.23.0.444.g18eeb5a265-goog
--
Dmitry
reply other threads:[~2019-10-01 18:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191001183253.GA2344@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=andy@infradead.org \
--cc=dvhart@infradead.org \
--cc=frank@f-seidel.de \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.