All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joel Fernandes <joel@joelfernandes.org>
To: "Viktor Rosendahl (BMW)" <viktor.rosendahl@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>,
	Ingo Molnar <mingo@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 2/4] preemptirq_delay_test: Add the burst feature and a sysfs trigger
Date: Tue, 1 Oct 2019 20:43:33 -0400	[thread overview]
Message-ID: <20191002004333.GB161396@google.com> (raw)
In-Reply-To: <20190920152219.12920-3-viktor.rosendahl@gmail.com>

On Fri, Sep 20, 2019 at 05:22:17PM +0200, Viktor Rosendahl (BMW) wrote:
> This burst feature enables the user to generate a burst of
> preempt/irqsoff latencies. This makes it possible to test whether we
> are able to detect latencies that systematically occur very close to
> each other.
> 
> The maximum burst size is 10. We also create 10 identical test
> functions, so that we get 10 different backtraces; this is useful
> when we want to test whether we can detect all the latencies in a
> burst. Otherwise, there would be no easy way of differentiating
> between which latency in a burst was captured by the tracer.
> 
> In addition, there is a sysfs trigger, so that it's not necessary to
> reload the module to repeat the test. The trigger will appear as
> /sys/kernel/preemptirq_delay_test/trigger in sysfs.
> 
> Signed-off-by: Viktor Rosendahl (BMW) <viktor.rosendahl@gmail.com>

Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>

thanks,

 - Joel


> ---
>  kernel/trace/Kconfig                 |   6 +-
>  kernel/trace/preemptirq_delay_test.c | 144 +++++++++++++++++++++++----
>  2 files changed, 128 insertions(+), 22 deletions(-)
> 
> diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
> index e08527f50d2a..2a58380ea310 100644
> --- a/kernel/trace/Kconfig
> +++ b/kernel/trace/Kconfig
> @@ -752,9 +752,9 @@ config PREEMPTIRQ_DELAY_TEST
>  	  configurable delay. The module busy waits for the duration of the
>  	  critical section.
>  
> -	  For example, the following invocation forces a one-time irq-disabled
> -	  critical section for 500us:
> -	  modprobe preemptirq_delay_test test_mode=irq delay=500000
> +	  For example, the following invocation generates a burst of three
> +	  irq-disabled critical sections for 500us:
> +	  modprobe preemptirq_delay_test test_mode=irq delay=500 burst_size=3
>  
>  	  If unsure, say N
>  
> diff --git a/kernel/trace/preemptirq_delay_test.c b/kernel/trace/preemptirq_delay_test.c
> index d8765c952fab..31c0fad4cb9e 100644
> --- a/kernel/trace/preemptirq_delay_test.c
> +++ b/kernel/trace/preemptirq_delay_test.c
> @@ -10,18 +10,25 @@
>  #include <linux/interrupt.h>
>  #include <linux/irq.h>
>  #include <linux/kernel.h>
> +#include <linux/kobject.h>
>  #include <linux/kthread.h>
>  #include <linux/module.h>
>  #include <linux/printk.h>
>  #include <linux/string.h>
> +#include <linux/sysfs.h>
>  
>  static ulong delay = 100;
> -static char test_mode[10] = "irq";
> +static char test_mode[12] = "irq";
> +static uint burst_size = 1;
>  
> -module_param_named(delay, delay, ulong, S_IRUGO);
> -module_param_string(test_mode, test_mode, 10, S_IRUGO);
> -MODULE_PARM_DESC(delay, "Period in microseconds (100 uS default)");
> -MODULE_PARM_DESC(test_mode, "Mode of the test such as preempt or irq (default irq)");
> +module_param_named(delay, delay, ulong, 0444);
> +module_param_string(test_mode, test_mode, 12, 0444);
> +module_param_named(burst_size, burst_size, uint, 0444);
> +MODULE_PARM_DESC(delay, "Period in microseconds (100 us default)");
> +MODULE_PARM_DESC(test_mode, "Mode of the test such as preempt, irq, or alternate (default irq)");
> +MODULE_PARM_DESC(burst_size, "The size of a burst (default 1)");
> +
> +#define MIN(x, y) ((x) < (y) ? (x) : (y))
>  
>  static void busy_wait(ulong time)
>  {
> @@ -34,37 +41,136 @@ static void busy_wait(ulong time)
>  	} while ((end - start) < (time * 1000));
>  }
>  
> -static int preemptirq_delay_run(void *data)
> +static __always_inline void irqoff_test(void)
>  {
>  	unsigned long flags;
> +	local_irq_save(flags);
> +	busy_wait(delay);
> +	local_irq_restore(flags);
> +}
>  
> -	if (!strcmp(test_mode, "irq")) {
> -		local_irq_save(flags);
> -		busy_wait(delay);
> -		local_irq_restore(flags);
> -	} else if (!strcmp(test_mode, "preempt")) {
> -		preempt_disable();
> -		busy_wait(delay);
> -		preempt_enable();
> +static __always_inline void preemptoff_test(void)
> +{
> +	preempt_disable();
> +	busy_wait(delay);
> +	preempt_enable();
> +}
> +
> +static void execute_preemptirqtest(int idx)
> +{
> +	if (!strcmp(test_mode, "irq"))
> +		irqoff_test();
> +	else if (!strcmp(test_mode, "preempt"))
> +		preemptoff_test();
> +	else if (!strcmp(test_mode, "alternate")) {
> +		if (idx % 2 == 0)
> +			irqoff_test();
> +		else
> +			preemptoff_test();
>  	}
> +}
> +
> +#define DECLARE_TESTFN(POSTFIX)				\
> +	static void preemptirqtest_##POSTFIX(int idx)	\
> +	{						\
> +		execute_preemptirqtest(idx);		\
> +	}						\
>  
> +/*
> + * We create 10 different functions, so that we can get 10 different
> + * backtraces.
> + */
> +DECLARE_TESTFN(0)
> +DECLARE_TESTFN(1)
> +DECLARE_TESTFN(2)
> +DECLARE_TESTFN(3)
> +DECLARE_TESTFN(4)
> +DECLARE_TESTFN(5)
> +DECLARE_TESTFN(6)
> +DECLARE_TESTFN(7)
> +DECLARE_TESTFN(8)
> +DECLARE_TESTFN(9)
> +
> +static void (*testfuncs[])(int)  = {
> +	preemptirqtest_0,
> +	preemptirqtest_1,
> +	preemptirqtest_2,
> +	preemptirqtest_3,
> +	preemptirqtest_4,
> +	preemptirqtest_5,
> +	preemptirqtest_6,
> +	preemptirqtest_7,
> +	preemptirqtest_8,
> +	preemptirqtest_9,
> +};
> +
> +#define NR_TEST_FUNCS ARRAY_SIZE(testfuncs)
> +
> +static int preemptirq_delay_run(void *data)
> +{
> +	int i;
> +	int s = MIN(burst_size, NR_TEST_FUNCS);
> +
> +	for (i = 0; i < s; i++)
> +		(testfuncs[i])(i);
>  	return 0;
>  }
>  
> -static int __init preemptirq_delay_init(void)
> +static struct task_struct *preemptirq_start_test(void)
>  {
>  	char task_name[50];
> -	struct task_struct *test_task;
>  
>  	snprintf(task_name, sizeof(task_name), "%s_test", test_mode);
> +	return kthread_run(preemptirq_delay_run, NULL, task_name);
> +}
> +
> +
> +static ssize_t trigger_store(struct kobject *kobj, struct kobj_attribute *attr,
> +			 const char *buf, size_t count)
> +{
> +	preemptirq_start_test();
> +	return count;
> +}
> +
> +static struct kobj_attribute trigger_attribute =
> +	__ATTR(trigger, 0200, NULL, trigger_store);
> +
> +static struct attribute *attrs[] = {
> +	&trigger_attribute.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group attr_group = {
> +	.attrs = attrs,
> +};
> +
> +static struct kobject *preemptirq_delay_kobj;
> +
> +static int __init preemptirq_delay_init(void)
> +{
> +	struct task_struct *test_task;
> +	int retval;
> +
> +	test_task = preemptirq_start_test();
> +	retval = PTR_ERR_OR_ZERO(test_task);
> +	if (retval != 0)
> +		return retval;
> +
> +	preemptirq_delay_kobj = kobject_create_and_add("preemptirq_delay_test",
> +						       kernel_kobj);
> +	if (!preemptirq_delay_kobj)
> +		return -ENOMEM;
> +
> +	retval = sysfs_create_group(preemptirq_delay_kobj, &attr_group);
> +	if (retval)
> +		kobject_put(preemptirq_delay_kobj);
>  
> -	test_task = kthread_run(preemptirq_delay_run, NULL, task_name);
> -	return PTR_ERR_OR_ZERO(test_task);
> +	return retval;
>  }
>  
>  static void __exit preemptirq_delay_exit(void)
>  {
> -	return;
> +	kobject_put(preemptirq_delay_kobj);
>  }
>  
>  module_init(preemptirq_delay_init)
> -- 
> 2.17.1
> 

  reply	other threads:[~2019-10-02  0:43 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-20 15:22 [PATCH v7 0/4] Some new features for the preempt/irqsoff tracers Viktor Rosendahl (BMW)
2019-09-20 15:22 ` [PATCH v7 1/4] ftrace: Implement fs notification for tracing_max_latency Viktor Rosendahl (BMW)
2019-10-02  0:32   ` Joel Fernandes
2019-10-03 10:23     ` Viktor Rosendahl
2019-10-02 15:13   ` Steven Rostedt
2019-10-02 22:04     ` Viktor Rosendahl
2019-10-02 22:50       ` Steven Rostedt
2019-09-20 15:22 ` [PATCH v7 2/4] preemptirq_delay_test: Add the burst feature and a sysfs trigger Viktor Rosendahl (BMW)
2019-10-02  0:43   ` Joel Fernandes [this message]
2019-09-20 15:22 ` [PATCH v7 3/4] Add the latency-collector to tools Viktor Rosendahl (BMW)
2019-09-20 15:22 ` [PATCH v7 4/4] ftrace: Add an option for tracing console latencies Viktor Rosendahl (BMW)
2019-10-02  0:52   ` Joel Fernandes
2019-10-02 22:44     ` Viktor Rosendahl
2019-10-03 13:48       ` Joel Fernandes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191002004333.GB161396@google.com \
    --to=joel@joelfernandes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=rostedt@goodmis.org \
    --cc=viktor.rosendahl@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.